Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


LED Indicators on GSXR600

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

sepher
Nova Slayer



Joined: 23 May 2011
Karma :
PostPosted: 14:07 - 04 May 2013    Post subject: LED Indicators on GSXR600 Reply with quote
Hi,

I have replaced my indicators with LED some time back on a K3 GSXR600, and got the fast flashing which actually just scrapped past on the MOT.

I've replaced the relay with one from eBay at the time, this did cure the fast flashing but sometimes the indicators would just stop working. After contacting the seller he sent out another one and it did exactly the same thing so I gave up and put up with the fast flashing on the standard relay.

Come today I've tried to sort it out again, I've now tried some wireround resistors in from Maplins put them on each wire of the two back indicators. I've tried a 10watt 6ohms resistor and a 10watt 20ohms resistor, and amazingly it's make no difference what so ever. So then I tried doubling the 20ohms resistor on one indicator and no resistor on the other and still no luck.

Anyone with a GSXR600 who has sucessfully put in LED indicators all round and slowed down the flashing?

Cheers
 Back to top
View user's profile Send private message You must be logged in to rate posts

ZebraDriver
Scooby Slapper



Joined: 13 Feb 2011
Karma :
PostPosted: 20:00 - 04 May 2013    Post subject: Indicator resistors Reply with quote
You are putting the resistors between the indicator wire and earth and not in line with the indicator?
 Back to top
View user's profile Send private message You must be logged in to rate posts

J.M.
World Chat Champion



Joined: 27 Mar 2011
Karma :
PostPosted: 20:18 - 04 May 2013    Post subject: Reply with quote
Buy a digital (LED) flasher relay. About £10 and will cure your problems.
____________________
2004 R1 & 2018 XSR900
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 22:20 - 04 May 2013    Post subject: Reply with quote
J.M. wrote:
Buy a digital (LED) flasher relay. About £10 and will cure your problems.


This.

You need an electronic flasher relay. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

Snorty
World Chat Champion



Joined: 13 Oct 2010
Karma :
PostPosted: 22:21 - 04 May 2013    Post subject: Reply with quote
I have two rear LED indicators, along the wires for each is a black rubber block, with a resistor in it, I presume.

Two, one for each indicator.
____________________
Current: Yamaha FZ1 '07 | GSXR 750 SRAD

Past: CB125TDC | TZR125 | GPZ500 | CBR600F3 | ZX9-R | GSXR1000 K4
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

sepher
Nova Slayer



Joined: 23 May 2011
Karma :
PostPosted: 10:52 - 05 May 2013    Post subject: Reply with quote
Thanks for the replies, the flasher unit is integrated into the side stand relay and all sorts on the GSXR which is a pain. It's not separate. But I suppose I could get a 2 pin flasher unit, and feed the indicator wires into the flasher unit instead of the original relay.

Do you think any 2 pin relay would do? I was looking at this..

https://www.ebay.co.uk/itm/270973992636
 Back to top
View user's profile Send private message You must be logged in to rate posts

smegballs
World Chat Champion



Joined: 28 Oct 2007
Karma :
PostPosted: 11:31 - 05 May 2013    Post subject: Reply with quote
sepher wrote:
Do you think any 2 pin relay would do? I was looking at this..

https://www.ebay.co.uk/itm/270973992636


No a 2 pin relay won't do.

A 2 pin relay is flashes due to something called a bi-metallic strip, the current flow heats the strip which then bends, breaking contact and turning the indicator off. As it cools, it straightens back out again and remakes the electrical contact, indie comes back on and the cycle starts again.

The problem with these is that if you don't have exactly the right load what they are designed for, they won't be heating/cooling at the right rate and the result is indicators that are two fast or two slow.

What you want is an electronic relay, where the flash rate is set by the electronics in the box and is not proportional to current flow. With one of these you can run LEDs, big bulbs or little bulbs etc etc and the flashing rate will stay constant. These electronic relays will have 3 (or more) pins as there needs to be a constant ground for the electronics inside to function.

So there will typically be 3 connections:

A 12v positive
A ground
A "flashing" output - in reality it's a live being switched on and off at a set rate

Then this flashing output gets routed to the left of right side indies by the switchgear switch.

Personally I wouldn't buy a relay, I'd knock one up from the shizzle in my electronics box. That's just me tho Wink
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

smegballs
World Chat Champion



Joined: 28 Oct 2007
Karma :
PostPosted: 11:35 - 05 May 2013    Post subject: Reply with quote
Could you please make up a paint pic of how you have wired up your resistors?

Do you know about resistors in series/parallel? Not insulting your knowledge, just most people don't know naff all about electronics/electrics.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 13 years, 195 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.06 Sec - Server Load: 0.78 - MySQL Queries: 13 - Page Size: 57 Kb