Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


curtain poles

Reply to topic
Bike Chat Forums Index -> Random Banter Goto page 1, 2  Next
View previous topic : View next topic  
Author Message

Dalemac
World Chat Champion



Joined: 15 Oct 2006
Karma :

PostPosted: 22:42 - 04 Jun 2013    Post subject: curtain poles Reply with quote

So I have bought my first house with the girlfriend, and there are no curtain poles. I go to drill some holes above the window and only get as far as the plasterboard.

Seems like my hammer drill and masonry bits are not up to the task of drilling the concrete lintel. What options do I have? Perhaps an sds drill will be up to the task?

Cheers.
____________________
YBR125 -> GPZ500S -> SL1000
 Back to top
View user's profile Send private message You must be logged in to rate posts

oldpink
World Chat Champion



Joined: 02 Aug 2006
Karma :

PostPosted: 22:47 - 04 Jun 2013    Post subject: Reply with quote

more than likely its the drill bit and not the drill
had a similar issue but went and bought a good Tungsten carbide masonry bit did the job Thumbs Up
____________________
I have become comfortably numb

Theory & hazard 24-may 2016, CBT 8th June 2016, MOD 1 2nd Aug 2016 Mod 2 2nd-Nov 2016 - Current bike CBR 600 RR
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Dalemac
World Chat Champion



Joined: 15 Oct 2006
Karma :

PostPosted: 08:43 - 05 Jun 2013    Post subject: Reply with quote

I bought a brand new masonry drill bit and it made zero difference.

Beings as i have to put curtain poles up on every window in the house i may as well just go for an SDS drill and get it over with.

Dale
____________________
YBR125 -> GPZ500S -> SL1000


Last edited by Dalemac on 08:46 - 05 Jun 2013; edited 1 time in total
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 08:44 - 05 Jun 2013    Post subject: Reply with quote

SDS drill required - assuming there's no steel involved of course. An SDS drill provides a greater percussive force than a hammer drill. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

angryjonny
World Chat Champion



Joined: 01 Sep 2006
Karma :

PostPosted: 08:55 - 05 Jun 2013    Post subject: Reply with quote

Or put the curtain pole an inch or two higher so you're drilling into brick not concrete. If you're drilling into the lintel you're awfully close to the window box.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Sako
World Chat Champion



Joined: 19 Feb 2012
Karma :

PostPosted: 09:48 - 05 Jun 2013    Post subject: Reply with quote

Have you tried gaffa tape or pva glue?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dalemac
World Chat Champion



Joined: 15 Oct 2006
Karma :

PostPosted: 09:49 - 05 Jun 2013    Post subject: Reply with quote

angryjonny wrote:
Or put the curtain pole an inch or two higher so you're drilling into brick not concrete. If you're drilling into the lintel you're awfully close to the window box.


Ahh, now there is a suggestion.

I drilled yesterday at 8cm above the window, there is only another 7cm above that before the coving for the ceiling is reached. (15cm from window to coving).

Its an ex council house built around 1955. What is the likely height of the lintel?

If I try again, at say 12 or 13cm, think I will have better luck or just have a load of holes in the wall? Embarassed

I also have some spare bricks - i'll try drilling one tonight with the current drill to see if the drill will be ok with brick.
____________________
YBR125 -> GPZ500S -> SL1000
 Back to top
View user's profile Send private message You must be logged in to rate posts

DrDonnyBrago
World Chat Champion



Joined: 03 Jan 2010
Karma :

PostPosted: 11:20 - 05 Jun 2013    Post subject: Reply with quote

You sure they are concrete lintels?

Had a similar brain fart in my old dear's house when my masonry bits came out covered in steel filings.
 Back to top
View user's profile Send private message You must be logged in to rate posts

J4mes
World Chat Champion



Joined: 18 Mar 2011
Karma :

PostPosted: 12:02 - 05 Jun 2013    Post subject: Reply with quote

Does the plasterboard have much of a gap behind it?

You might be able to put plasterboard fixings in rather than having to drill all the way in to the blockwork.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dalemac
World Chat Champion



Joined: 15 Oct 2006
Karma :

PostPosted: 12:02 - 05 Jun 2013    Post subject: Reply with quote

DrDonnyBrago wrote:
You sure they are concrete lintels?

Had a similar brain fart in my old dear's house when my masonry bits came out covered in steel filings.


Positive. Concrete dust everywhere after spending 15 minutes drilling and only getting a centimeter into the concrete.
____________________
YBR125 -> GPZ500S -> SL1000
 Back to top
View user's profile Send private message You must be logged in to rate posts

Aikman666
World Chat Champion



Joined: 20 Dec 2004
Karma :

PostPosted: 12:15 - 05 Jun 2013    Post subject: Reply with quote

Is it out of the question to mount the curtain pole on a nice bit of wood and then no more nails the wood to the wall? Seems to be how the landlord done it in my place.

Otherwise when I'm at work (home store) I use plasterboard fixings to mount all the curtain poles there and they are plenty strong enough - assuming there's clearance enough of course.
____________________
Will work for petrol
My Design Blog
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Dalemac
World Chat Champion



Joined: 15 Oct 2006
Karma :

PostPosted: 12:22 - 05 Jun 2013    Post subject: Reply with quote

J4mes wrote:
Does the plasterboard have much of a gap behind it?

You might be able to put plasterboard fixings in rather than having to drill all the way in to the blockwork.


Nope, the plasterboard is flush to the wall, no cavity.

Aikman666Is wrote:
Is it out of the question to mount the curtain pole on a nice bit of wood and then no more nails the wood to the wall? Seems to be how the landlord done it in my place.

Otherwise when I'm at work (home store) I use plasterboard fixings to mount all the curtain poles there and they are plenty strong enough - assuming there's clearance enough of course.


I would prefer not to no more nails it together, and the extra bit of wood would be a bit nasty in my opinion. Thanks for the input though.
____________________
YBR125 -> GPZ500S -> SL1000
 Back to top
View user's profile Send private message You must be logged in to rate posts

growler
Traffic Copper



Joined: 17 Jul 2007
Karma :

PostPosted: 16:43 - 05 Jun 2013    Post subject: Reply with quote

know it may seem a stupid question but the house is brick and not no fines concrete?
____________________
DILLIGAF
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

robs321
Could Be A Chat Bot



Joined: 24 Feb 2010
Karma :

PostPosted: 16:56 - 05 Jun 2013    Post subject: Reply with quote

Go hire, or borrow and SDS drill for the day!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

andyscooter
World Chat Champion



Joined: 30 May 2009
Karma :

PostPosted: 16:58 - 05 Jun 2013    Post subject: Reply with quote

our lintals have a metel lattice surround on them

i found this out by hitting one with a drill and bending the very hot drill bit 90 degrees leaving me a 3 inch wide hole to look in

my house is a late 60's house though
____________________
gilera runner vxr200 (chavped)
if its spelt wrong its my fat fingers and daft auto correct on my tablet
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Dalemac
World Chat Champion



Joined: 15 Oct 2006
Karma :

PostPosted: 16:59 - 05 Jun 2013    Post subject: Reply with quote

Growler wrote:
know it may seem a stupid question but the house is brick and not no fines concrete?


Nope, definitely a brick built house !
____________________
YBR125 -> GPZ500S -> SL1000
 Back to top
View user's profile Send private message You must be logged in to rate posts

J4mes
World Chat Champion



Joined: 18 Mar 2011
Karma :

PostPosted: 17:44 - 05 Jun 2013    Post subject: Reply with quote

"No more nails" the pole fittings to the wall?

Proper Pikey!
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dalemac
World Chat Champion



Joined: 15 Oct 2006
Karma :

PostPosted: 08:19 - 06 Jun 2013    Post subject: Reply with quote

Last night i managed to drill the supports at either side of the window bay as they are just brick, but even so it wasn't easy.

Gonna have to buy an SDS drill to get the job done i think.

The lintel must be huge - i drilled another hole in the middle of the bay as high as i could (13cm) and it was still concrete!
____________________
YBR125 -> GPZ500S -> SL1000
 Back to top
View user's profile Send private message You must be logged in to rate posts

J4mes
World Chat Champion



Joined: 18 Mar 2011
Karma :

PostPosted: 09:02 - 06 Jun 2013    Post subject: Reply with quote

I got a £40 240v Hammer SDS from B&Q about 5 years ago, and it has been brilliant around the house and even when contracting doing electrical installation work (as long as I have access to 240V of course!)

Great for drilling bricks, blocks, cement and it has rotary-stop so you can use an SDS Chisel for chasing out walls or knocking tiles off

Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

angryjonny
World Chat Champion



Joined: 01 Sep 2006
Karma :

PostPosted: 09:27 - 06 Jun 2013    Post subject: Reply with quote

I've gone through my 8" thick reinforced concrete drive with my SDS drill and a chisel as a jackhammer. Awesome piece of kit but I warn you, if you get one, you'll be going round looking for things to knock holes in,.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dalemac
World Chat Champion



Joined: 15 Oct 2006
Karma :

PostPosted: 11:04 - 06 Jun 2013    Post subject: Reply with quote

I have ordered a SDS from screwfix - should be here tomorrow.

https://www.screwfix.com/p/titan-ttb278sds-5kg-sds-drill-240v/97533

I'll let you know how it goes, but it had over 200 reviews and 4-5 star ratings, so im hoping it will be able to cope!

The drill i bought is a little bigger than i would have liked for this kind of job, but i only have to drill two holes in concrete lintel and soon i might be ripping up a couple of inches of concrete, so bought it with that in mind.
____________________
YBR125 -> GPZ500S -> SL1000
 Back to top
View user's profile Send private message You must be logged in to rate posts

loply
World Chat Champion



Joined: 24 Mar 2004
Karma :

PostPosted: 13:58 - 06 Jun 2013    Post subject: Reply with quote

Why not just no-more-nails a piece of timber trim above the window then screw your curtain poles into that?

The trim is usually painted with gloss white and makes it easier to change poles later.
____________________
Yamaha SZR660 Caution to the wind, the throttle pinned!
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tarmacsurfer
World Chat Champion



Joined: 29 Jun 2004
Karma :

PostPosted: 14:06 - 06 Jun 2013    Post subject: Reply with quote

J4mes wrote:
and even when contracting doing electrical installation work (as long as I have access to 240V of course!


I was under the impression that site work required 110V gear?
____________________
I'm immortal. Well, so far.
 Back to top
View user's profile Send private message You must be logged in to rate posts

fatpies
World Chat Champion



Joined: 01 Mar 2011
Karma :

PostPosted: 14:12 - 06 Jun 2013    Post subject: Reply with quote

I thought this was going to be a Krad esq post, as in certain Poles.
____________________
"It's easy to attack and destroy an act of creation. It's a lot more difficult to perform one"
 Back to top
View user's profile Send private message You must be logged in to rate posts

J4mes
World Chat Champion



Joined: 18 Mar 2011
Karma :

PostPosted: 14:19 - 06 Jun 2013    Post subject: Reply with quote

Tarmacsurfer wrote:
J4mes wrote:
and even when contracting doing electrical installation work (as long as I have access to 240V of course!


I was under the impression that site work required 110V gear?


Private contracting, not site work Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 13 years, 165 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Random Banter All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.06 Sec - Server Load: 0.39 - MySQL Queries: 13 - Page Size: 122.83 Kb