Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Seized Swingarm Spindle

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 18:26 - 21 Jun 2013    Post subject: Seized Swingarm Spindle Reply with quote

Can't get my swingarm spindle out to replace, tried soaking it hitting it.

anyideas?
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

The other Paul Rudd
Scooby Slapper



Joined: 06 May 2013
Karma :

PostPosted: 18:38 - 21 Jun 2013    Post subject: Reply with quote

Angle grinder. Good luck.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 19:07 - 21 Jun 2013    Post subject: Reply with quote

https://rogerborg.dnsd.me/thunder-hammer.jpg
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

james1988
World Chat Champion



Joined: 06 May 2010
Karma :

PostPosted: 19:07 - 21 Jun 2013    Post subject: Reply with quote

Tried using a drift while hitting it? May make some difference, though I'm not sure if any.

James
____________________
Honda XL1000VA '07
 Back to top
View user's profile Send private message You must be logged in to rate posts

Copycat73
World Chat Champion



Joined: 11 Jan 2013
Karma :

PostPosted: 19:12 - 21 Jun 2013    Post subject: Reply with quote

use a propane blow torch on the areas around the bushes.
____________________
Whatever I post I have no citation and no intention of providing one..
caveat emptor
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 20:04 - 21 Jun 2013    Post subject: Reply with quote

This ^^^

With a freeze spray on the spindle as well.
 Back to top
View user's profile Send private message You must be logged in to rate posts

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 20:05 - 21 Jun 2013    Post subject: Reply with quote

using a drift mate the spindle is counter sunk its a bitch only thing holding it is whatever it is seized against
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

P.
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 20:19 - 21 Jun 2013    Post subject: Reply with quote

Drain oil and fuel, lay the fucker on a mattress and get maximum hammer powah.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stickybackbob
Trackday Trickster



Joined: 23 Mar 2013
Karma :

PostPosted: 20:44 - 21 Jun 2013    Post subject: Reply with quote

If you can't bash it free, see if you can get a hacksaw between the swing arm and frame to cut it. Once out, you can heat to the seized bits to get them out.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 20:47 - 21 Jun 2013    Post subject: Reply with quote

##Paddy## wrote:
Drain oil and fuel, lay the fucker on a mattress and get maximum hammer powah.


lol trust me paddy I have been using a club hammer and drift the fucker aint moving Sad
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

.....
Quote Me Happy



Joined: 15 Jan 2005
Karma :

PostPosted: 21:03 - 21 Jun 2013    Post subject: Reply with quote

SQL wrote:
lol trust me paddy I have been using a club hammer and drift the fucker aint moving Sad


You need a bigger hammer.
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 21:26 - 21 Jun 2013    Post subject: Reply with quote

Joe wrote:
SQL wrote:
lol trust me paddy I have been using a club hammer and drift the fucker aint moving Sad


You need a bigger hammer.


https://www.aspli.com/products/635/carters-14lb-sledge-hammer?gclid=CNCm_6uL9rcCFWLHtAodej0AGA
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 22:55 - 21 Jun 2013    Post subject: Reply with quote

ITS OUT, had to drill the engine mounting and use acf50 in the hole then it gave up after a while
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Pol Anorl This post is not being displayed because the poster is banned. Unhide this post / all posts.

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 23:55 - 21 Jun 2013    Post subject: Reply with quote

well i did use a 2lb lump hammer so ya bigger hammer but not of thor quality.
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 228 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 1.05 - MySQL Queries: 13 - Page Size: 82.31 Kb