Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Electric garage door

Reply to topic
Bike Chat Forums Index -> Dear Auntie BCF...
View previous topic : View next topic  
Author Message

Symon27
Nova Slayer



Joined: 14 Sep 2012
Karma :

PostPosted: 18:37 - 14 Oct 2013    Post subject: Electric garage door Reply with quote

Just moved into a new house and it has a double garage with an electric door, first few days it was working fine now it keeps playing up.
It will travel around 10 inches down then stop, if I press the button to go down again it will go another 10 then stop ect. Going up is fine.
I called some guy and he wants £50 just to come out and look at it, I've read online about some safety eye what sends an infa red beam across and if it gets broken it will stop.
This garage don't have that, it's got two magnets on one side, one and the top and one at the bottom.
The control unit flashes red if the when the door is open and stay red if the door is shut.
Dose anyway have an idea what could cause this?[/list]
____________________
Honda Nsr 125 - Sold
Zxr 400 - Sold
Bandit 600 - Current (Y)
 Back to top
View user's profile Send private message You must be logged in to rate posts

J.M.
World Chat Champion



Joined: 27 Mar 2011
Karma :

PostPosted: 18:49 - 14 Oct 2013    Post subject: Reply with quote

Can't you find the device which triggers the door to stop closing and bypass it to see what happens? If you can manually have full control then rig up some replacement trigger.
____________________
2004 R1 & 2018 XSR900
 Back to top
View user's profile Send private message You must be logged in to rate posts

Minty
World Chat Champion



Joined: 23 Dec 2005
Karma :

PostPosted: 19:21 - 14 Oct 2013    Post subject: Reply with quote

Can you switch it to manual? Mine has a connector to the main shaft/chain drive that you pull to disengage the door from the mechanism.

It would give you a chance to close it by hand and see if it is sticking in any way. It could be that the motor uses more grunt to 'push' the door shut than it needs to 'pull' it open. It may be sensing the overload at trying to close it and is tripping in some way.

Grease all the runs etc too as a matter or basic maintenance.
____________________
My fingers smell of your mum.
 Back to top
View user's profile Send private message You must be logged in to rate posts

ScaredyCat
World Chat Champion



Joined: 19 May 2012
Karma :

PostPosted: 22:12 - 14 Oct 2013    Post subject: Reply with quote

Can you find a manual for it?

The one we had used to 'forget' the max/min open/shut positions if the power failed. You needed to go through a reset/teach phase before it would open fully again.
____________________
Honda CBF125 ➝ NC700X
Honda CBF125 ↳ Speed Triple
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 23:26 - 14 Oct 2013    Post subject: Reply with quote

I recently smashed my up and over garage door off then in half with a sledgehammer and replaced it with a pair of wooden doors that close into the middle on conventional hinges.

I have been a calmer and more balanced person since.

It is soon to be followed by my uPVC front door.

The thought of an electronically activated up and over garage door brings me out in a cold sweat. NOBODY needs an electically opening garage door.

Except Batman or the Thunderbirds obviously.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tarmacsurfer
World Chat Champion



Joined: 29 Jun 2004
Karma :

PostPosted: 09:44 - 15 Oct 2013    Post subject: Reply with quote

stinkwheel wrote:
NOBODY needs an electically opening garage door.

Except Batman or the Thunderbirds obviously.


I disagree with you, for once Laughing

Back when my spine was fuxx0red it was incredibly useful. Mines not up and over though, it's a roller setup. Hate up and over with a passion, also starting to view UPVC doors in the same way Confused
____________________
I'm immortal. Well, so far.
 Back to top
View user's profile Send private message You must be logged in to rate posts

331X2
Crazy Courier



Joined: 10 Jul 2013
Karma :

PostPosted: 15:24 - 15 Oct 2013    Post subject: Reply with quote

stinkwheel wrote:
I recently smashed my up and over garage door off then in half with a sledgehammer and replaced it with a pair of wooden doors that close into the middle on conventional hinges.

I have been a calmer and more balanced person since.

It is soon to be followed by my uPVC front door.

The thought of an electronically activated up and over garage door brings me out in a cold sweat. NOBODY needs an electically opening garage door.

Except Batman or the Thunderbirds obviously.


After putting two sets of wire on my overhead spring assisted door I'm inclined to do exactly the same as you, nearly caved my fucking head in twice... Now on the hunt for some old style, square windows in the top quarter doors for that 1920's/1930's local garage look Cool
 Back to top
View user's profile Send private message You must be logged in to rate posts

map
Mr Calendar



Joined: 14 Jun 2004
Karma :

PostPosted: 16:08 - 15 Oct 2013    Post subject: Reply with quote

My manual up and over is currently FUBARed by my step-son.
So I can empathise about the lack of a working garage door.
The damn thing is a pain without the wires and the spring.

You really don't want to know the hassle in trying to replace the wires and checking the spring. I'll give you a hint, I'm waiting for a second lot of parts.
____________________
...and the whirlwind is in the thorn trees, it's hard for thee to kick against the pricks...
Gibbs, what did Duckie look like when he was younger? Very Happy
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

The Shaggy D.A.
Super Spammer



Joined: 12 Sep 2008
Karma :

PostPosted: 16:31 - 15 Oct 2013    Post subject: Reply with quote

I do know that if I had one, the open/close remote would be wired up to my high beam. Pull up, flash, door opens, ride in, flash, door closes Thumbs Up
____________________
Chances are quite high you are not in my Monkeysphere, and I don't care about you. Don't take it personally.
Currently : Royal Enfield 350 Meteor
Previously : CB100N > CB250RS > XJ900F > GT550 > GPZ750R/1000RX > AJS M16 > R100RT > Bullet 500 > CB500 > LS650P > Bullet Electra X & YBR125 > Bullet 350 "Superstar" & YBR125 Custom > Royal Enfield Classic 500 Despatch Limited Edition (28 of 200) & CB Two-Fifty Nighthawk > ER5
 Back to top
View user's profile Send private message You must be logged in to rate posts

ZebraDriver
Scooby Slapper



Joined: 13 Feb 2011
Karma :

PostPosted: 18:41 - 15 Oct 2013    Post subject: Reply with quote

What you need is one of these:

https://www.youtube.com/watch?v=1C-Bxifv2Pk
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 20:46 - 16 Oct 2013    Post subject: Reply with quote

stinkwheel wrote:
NOBODY needs an electically opening garage door.
Except Batman or the Thunderbirds obviously.

https://www.jonkrastes.com/lessons/images/hong%20kong%20phooey.jpg
Racist.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

Symon27
Nova Slayer



Joined: 14 Sep 2012
Karma :

PostPosted: 22:06 - 16 Oct 2013    Post subject: Reply with quote

ScaredyCat wrote:
Can you find a manual for it?

The one we had used to 'forget' the max/min open/shut positions if the power failed. You needed to go through a reset/teach phase before it would open fully again.

Can't seem to find a manual anywhere, all I no is its a sws door and they want £50 just to come have a look.
I've taken the cover off the power box and there's a few wires and some dip switches.
Pain in the ass when you have to stand out in the rain pressing the button 20 times for it to completely shut.
____________________
Honda Nsr 125 - Sold
Zxr 400 - Sold
Bandit 600 - Current (Y)
 Back to top
View user's profile Send private message You must be logged in to rate posts

fredsredhat
Traffic Copper



Joined: 11 Sep 2005
Karma :

PostPosted: 17:39 - 17 Oct 2013    Post subject: Reply with quote

if its an sws it'll have a grey box to 1 side on the bottom of the curtain. on the channel there'll be 2 grey magnets. 1 at top and 1 at bottom. sounds to me like a magnet has come off. the sensor doesn't know where it is so goes into a type of deadman mode. (im assuming its a somfy/pdt remote unit. grey box with light on top. grey remote fobs with 2 green buttons. 1 red and 1 grey?

EDIT re-read your post. when the grey sensor passes the top magnet how many flashes does the led give off?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Symon27
Nova Slayer



Joined: 14 Sep 2012
Karma :

PostPosted: 18:23 - 17 Oct 2013    Post subject: Reply with quote

fredsredhat wrote:
if its an sws it'll have a grey box to 1 side on the bottom of the curtain. on the channel there'll be 2 grey magnets. 1 at top and 1 at bottom. sounds to me like a magnet has come off. the sensor doesn't know where it is so goes into a type of deadman mode. (im assuming its a somfy/pdt remote unit. grey box with light on top. grey remote fobs with 2 green buttons. 1 red and 1 grey?

EDIT re-read your post. when the grey sensor passes the top magnet how many flashes does the led give off?

That's what it has, the box on the wall light is orange then flashes red 3 times. But going up it will stay green, and occasionally the grey box will flash red but most of the time the little led dose not do anything.
____________________
Honda Nsr 125 - Sold
Zxr 400 - Sold
Bandit 600 - Current (Y)
 Back to top
View user's profile Send private message You must be logged in to rate posts

lihp
World Chat Champion



Joined: 22 Sep 2010
Karma :

PostPosted: 18:30 - 17 Oct 2013    Post subject: Reply with quote

Is there a strip along the bottom?

Many of these are used to stop the door if something hits it. Check that this is not faulty or damaged. As it will not prevent operation going up, but may cause it to continually stop while trying to bring it down.
____________________
covent.gardens: lihp is my most favourite member ever
 Back to top
View user's profile Send private message You must be logged in to rate posts

mjn51
Traffic Copper



Joined: 04 Feb 2011
Karma :

PostPosted: 19:25 - 17 Oct 2013    Post subject: Reply with quote

Automatic doors have a safety control built in to stop in shutting to hard on an obstruction.
If it is to stiff shutting it could trigger it, try lubricating the runners, and any wheels etc.
HTH Mike
 Back to top
View user's profile Send private message You must be logged in to rate posts

The Shaggy D.A.
Super Spammer



Joined: 12 Sep 2008
Karma :

PostPosted: 20:26 - 17 Oct 2013    Post subject: Reply with quote

A Parrot wrote:
Automatic doors have a safety control built in to stop in shutting to hard on an obstruction.
If it is to stiff shutting it could trigger it, try lubricating the runners, and any wheels etc.
HTH Mike


Minty wrote:
It could be that the motor uses more grunt to 'push' the door shut than it needs to 'pull' it open. It may be sensing the overload at trying to close it and is tripping in some way.

Grease all the runs etc too as a matter or basic maintenance.

____________________
Chances are quite high you are not in my Monkeysphere, and I don't care about you. Don't take it personally.
Currently : Royal Enfield 350 Meteor
Previously : CB100N > CB250RS > XJ900F > GT550 > GPZ750R/1000RX > AJS M16 > R100RT > Bullet 500 > CB500 > LS650P > Bullet Electra X & YBR125 > Bullet 350 "Superstar" & YBR125 Custom > Royal Enfield Classic 500 Despatch Limited Edition (28 of 200) & CB Two-Fifty Nighthawk > ER5
 Back to top
View user's profile Send private message You must be logged in to rate posts

Oldie
Brolly Dolly



Joined: 05 Dec 2010
Karma :

PostPosted: 06:27 - 18 Oct 2013    Post subject: Reply with quote

Sounds like the metal frames that the rollers run along are out of alignment. Check where they are joined as even being slightly out will cause the problem you describe. Grease the rails whilst you are at it.
 Back to top
View user's profile Send private message You must be logged in to rate posts

fredsredhat
Traffic Copper



Joined: 11 Sep 2005
Karma :

PostPosted: 09:38 - 18 Oct 2013    Post subject: Reply with quote

If the led on the curtain sensor isnt flashing when it passes a magnet either the magnet is too far away or the batteries have died. Open the cover (on curtain mounted sensor) and they are 2 cell type batteries.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Symon27
Nova Slayer



Joined: 14 Sep 2012
Karma :

PostPosted: 14:38 - 18 Oct 2013    Post subject: Reply with quote

fredsredhat wrote:
If the led on the curtain sensor isnt flashing when it passes a magnet either the magnet is too far away or the batteries have died. Open the cover (on curtain mounted sensor) and they are 2 cell type batteries.

Ive replaced the batteries and still the same, ive uploaded some videos.
https://www.youtube.com/watch?v=LMLJkiJasYE
https://www.youtube.com/watch?v=uHWG4rGxjJg
____________________
Honda Nsr 125 - Sold
Zxr 400 - Sold
Bandit 600 - Current (Y)
 Back to top
View user's profile Send private message You must be logged in to rate posts

fredsredhat
Traffic Copper



Joined: 11 Sep 2005
Karma :

PostPosted: 17:50 - 18 Oct 2013    Post subject: Reply with quote

Straight away can see the sensor is too far away from the magnets. The magnets act as a guide to the safety edge so it knows where the door position is in relation to the limits. (Where it stops top and bottom) send the door down but not so it touches the floor and bar tge curtain toward the magnets. Yoy shouldn't be able to see the fabric strip. After that send it up and unplug the wall unit. Leave a few minutes and hopefully that should be fixed
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Symon27
Nova Slayer



Joined: 14 Sep 2012
Karma :

PostPosted: 19:15 - 18 Oct 2013    Post subject: Reply with quote

fredsredhat wrote:
Straight away can see the sensor is too far away from the magnets. The magnets act as a guide to the safety edge so it knows where the door position is in relation to the limits. (Where it stops top and bottom) send the door down but not so it touches the floor and bar tge curtain toward the magnets. Yoy shouldn't be able to see the fabric strip. After that send it up and unplug the wall unit. Leave a few minutes and hopefully that should be fixed

I understand most of that but do what to the curtain? And i can't unplug the wall unit but can turn it off though the mains?
Cheers
____________________
Honda Nsr 125 - Sold
Zxr 400 - Sold
Bandit 600 - Current (Y)
 Back to top
View user's profile Send private message You must be logged in to rate posts

fredsredhat
Traffic Copper



Joined: 11 Sep 2005
Karma :

PostPosted: 08:23 - 19 Oct 2013    Post subject: Reply with quote

The entire curtain needs to be moved 20mm toward the magnets. (Crow) bar it over but be aware its only foam filled aluminium so gentle but firm
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 13 years, 32 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Dear Auntie BCF... All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.07 Sec - Server Load: 0.32 - MySQL Queries: 13 - Page Size: 121.59 Kb