|
|
| Author |
Message |
| pdg |
This post is not being displayed .
|
 pdg World Chat Champion

Joined: 15 Sep 2012 Karma :   
|
 Posted: 13:43 - 16 Dec 2013 Post subject: Beko washing machine fault not a review |
 |
|
We've had this Beko washing machine for just a shade over a year.
Literally days before the warranty expired it developed what I consider a fault... Others may consider it a cheap way of fitting neon underlights.
Sometimes, there will be an arcing noise when it goes onto spin accompanied by flashing/sparks from underneath. Doesn't happen every time and not always on the same cycle so it's completely un-reproducible.
We had the service agent come out and replace under warranty the motor and DC control board (but not the main control board) and the problem persists, still intermittently. Since the 'repair' we've caught it on video a couple of times:
https://www.youtube.com/watch?v=9PVExH01AHo
https://www.youtube.com/watch?v=hcA5hSCDKHU
When it's not doing this, everything is fine. When it does do it, it reeks... That nice burnt carbon/solder/metal smell. Every time the service agent has come out (3 times so far) it's performed perfectly.
I still have the old motor - no signs of the brushes disintegrating, bearings feel smooth with no play etc. and I would say it's fine. The old DC board seems fine too - the rectifier tests fine and other components test within spec.
We've spoken to the service centre again and they seem a bit 'meh' about it. Over a year old now so they probably can't be bothered. We offered to email videos which they said they'd view, and when we sent them they said they can't view them - youtube ahoy then.
So, (apart from the slack chain and twisted subframe - I've checked the powerband too, it's the right colour and not worn) any ideas? ____________________ Any and all advice given should not be followed - if you have to ask it means you don't know so get a man in to do it for you.
Last edited by pdg on 21:48 - 16 Dec 2013; edited 2 times in total |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| CaNsA |
This post is not being displayed .
|
 CaNsA Super Spammer

Joined: 02 Jan 2008 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| pdg |
This post is not being displayed .
|
 pdg World Chat Champion

Joined: 15 Sep 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| mentalboy |
This post is not being displayed .
|
 mentalboy World Chat Champion

Joined: 05 May 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| pdg |
This post is not being displayed .
|
 pdg World Chat Champion

Joined: 15 Sep 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| mentalboy |
This post is not being displayed .
|
 mentalboy World Chat Champion

Joined: 05 May 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| oldpink |
This post is not being displayed .
|
 oldpink World Chat Champion

Joined: 02 Aug 2006 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| angryjonny |
This post is not being displayed .
|
 angryjonny World Chat Champion

Joined: 01 Sep 2006 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| CaNsA |
This post is not being displayed .
|
 CaNsA Super Spammer

Joined: 02 Jan 2008 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| mentalboy |
This post is not being displayed .
|
 mentalboy World Chat Champion

Joined: 05 May 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| angryjonny |
This post is not being displayed .
|
 angryjonny World Chat Champion

Joined: 01 Sep 2006 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| mentalboy |
This post is not being displayed .
|
 mentalboy World Chat Champion

Joined: 05 May 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Minty |
This post is not being displayed .
|
 Minty World Chat Champion

Joined: 23 Dec 2005 Karma :   
|
 Posted: 16:20 - 16 Dec 2013 Post subject: |
 |
|
Just google "Beko appliance fire". Plenty of reading to be had. I suggest you go to their web site and see if your appliance is affected by the many product recalls.
In short, there is a very good reason as to why Beko appliances are so cheap. ____________________ My fingers smell of your mum. |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| pdg |
This post is not being displayed .
|
 pdg World Chat Champion

Joined: 15 Sep 2012 Karma :   
|
 Posted: 16:45 - 16 Dec 2013 Post subject: |
 |
|
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| pdg |
This post is not being displayed .
|
 pdg World Chat Champion

Joined: 15 Sep 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| mentalboy |
This post is not being displayed .
|
 mentalboy World Chat Champion

Joined: 05 May 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| JP7 |
This post is not being displayed .
|
 JP7 World Chat Champion

Joined: 22 Dec 2008 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| pdg |
This post is not being displayed .
|
 pdg World Chat Champion

Joined: 15 Sep 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| stinkwheel |
This post is not being displayed .
|
 stinkwheel Bovine Proctologist

Joined: 12 Jul 2004 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| pdg |
This post is not being displayed .
|
 pdg World Chat Champion

Joined: 15 Sep 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| dodgydog |
This post is not being displayed .
|
 dodgydog World Chat Champion

Joined: 10 Sep 2009 Karma :  
|
 Posted: 20:27 - 16 Dec 2013 Post subject: |
 |
|
Have you had a look at the sides of the machine? It's pretty common for them to be "clamped" in the warehouse (when gripped the wrong way by the clamp truck). That causes all sorts of problems. Sometimes it's hard to see, but they only need to be pushed in a little way. We picked one up that had burst into flames, it had been in use a good few months, but once it had worn in a bit something inside started rubbing on a wire.
Also there's a polystyrene block up inside the machine, that's supposed to be removed when delivered, (but it's a bastard to get out, so some delivery guys don't bother) amazing how often we used to go pick them up for exchange when it was just that block left inside, causing vibration and rough running, (and in one case, a houseful of smoke).
Looking at the video though, my money would be on the motor, replaced or not. ____________________ I know that you believe that you understood what you think I said, but I am not sure you realise that what you heard is not exactly what I meant |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| pdg |
This post is not being displayed .
|
 pdg World Chat Champion

Joined: 15 Sep 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| mentalboy |
This post is not being displayed .
|
 mentalboy World Chat Champion

Joined: 05 May 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| stinkwheel |
This post is not being displayed .
|
 stinkwheel Bovine Proctologist

Joined: 12 Jul 2004 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Robby |
This post is not being displayed .
|
 Robby Dirty Old Man

Joined: 16 May 2002 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
Old Thread Alert!
The last post was made 12 years, 336 days ago. Instead of replying here, would creating a new thread be more useful? |
 |
|
|