Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


CBR600RR-9 is this past repair?

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

andybow
L Plate Warrior



Joined: 06 Jan 2014
Karma :

PostPosted: 17:46 - 06 Jan 2014    Post subject: CBR600RR-9 is this past repair? Reply with quote

hi guys had a unfortunate low side which resulted in a broken leg, i am now fully recovered and upon inspecting my bike last night i came across this, the clutch cover is easily replaceable but the actual engine casing has worn away what are my options, if any!!! Sad cheers in advance for any help

Andy[img][/img]
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 17:53 - 06 Jan 2014    Post subject: Reply with quote

https://upload.wikimedia.org/wikipedia/commons/8/89/Duct-tape.jpg

https://static.ddmcdn.com/gif/hammer-1.jpg

Mr. Green
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

MarJay
But it's British!



Joined: 15 Sep 2003
Karma :

PostPosted: 17:58 - 06 Jan 2014    Post subject: Reply with quote

You can't repair that in situ unless you bodge it, so I suspect the bike is now a write off.
Unless the damage is confined to a removable component (IE the sump or an engine cover) I think you're very much out of luck.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F; Cheap project: CBR900RR FireBlade
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

andybow
L Plate Warrior



Joined: 06 Jan 2014
Karma :

PostPosted: 18:00 - 06 Jan 2014    Post subject: Reply with quote

thats what i thought, does anyone know what the engine casing is made from, possibly a specialist welder could magic something?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

misscrabstick
Crazy Courier



Joined: 05 Jul 2013
Karma :

PostPosted: 18:26 - 06 Jan 2014    Post subject: Reply with quote

Is that a loose chain flapping abut inside? anyway, I think if you could get the outer casing off the damaged bit of the crankcase could be repaired by a talented alloy welder.

Take some detailed pictures and go and talk to some welders and see if they up for it.
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

andybow
L Plate Warrior



Joined: 06 Jan 2014
Karma :

PostPosted: 18:31 - 06 Jan 2014    Post subject: Reply with quote

yes it is thats my next worry, it doenst look like a cam chain, so im hoping it is just for a pump or something not detrimental 2 the bike,

thanks i was thinking that and have already contacted some fabricators, Thumbs Up
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

1cyl
World Chat Champion



Joined: 04 Feb 2004
Karma :

PostPosted: 19:38 - 06 Jan 2014    Post subject: Reply with quote

Sick

That's filthy mate.

You'd need some serious welding skills to repair that. Plus even if you can, by the looks of things you've then got to get a face on it that the clutch cover gasket will seal against, and you won't know till you've spent money.
Not to mention the damage inside caused by debris/impact.

Any better pics?
____________________
Chase my Witch up, Catch my Snitch up.
The SMC | The Pit | Stable


Last edited by 1cyl on 19:42 - 06 Jan 2014; edited 1 time in total
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :

PostPosted: 19:39 - 06 Jan 2014    Post subject: Reply with quote

I'd suggest you check inside that clutch cover as best you can before committing to spending.
I'd also want to know how much debris got inside and probably drop the sump too just to be sure.
How long and fast was the engine running when you came off?
The oil pump could suck air when the bikes on its side and if the motors revving away, possibly damage a bearing.
Off load for a short time, its probably fine, but it pays to check.

the broken case is quite fixable with some creative bodgineering
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 19:54 - 06 Jan 2014    Post subject: Reply with quote

Me, I would consider it scrap.. others may be able to fix, but me, nope. would never trust it to keep together after a repair.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Blau Zedong This post is not being displayed because the poster is banned. Unhide this post / all posts.

andybow
L Plate Warrior



Joined: 06 Jan 2014
Karma :

PostPosted: 20:19 - 06 Jan 2014    Post subject: Reply with quote

i dont know how long and fast the engine was running after it dropped, i was in a fence Sad. thinking back when that helpful fence stopped me it was silent so it probally cut out when it dropped? i have turned the engine over just to see, this was before i noticed the hole in the casing,
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Scythe
Crazy Courier



Joined: 24 Jul 2010
Karma :

PostPosted: 20:36 - 06 Jan 2014    Post subject: Reply with quote

andybow wrote:
i dont know how long and fast the engine was running after it dropped, i was in a fence Sad. thinking back when that helpful fence stopped me it was silent so it probally cut out when it dropped? i have turned the engine over just to see, this was before i noticed the hole in the casing,


I'd source a second hand engine if you can, and sell that for spares.
____________________
2009 Yamaha YBR125 -> 2000 SV650S -> 2005 Kawasaki ZX6R 636
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :

PostPosted: 20:42 - 06 Jan 2014    Post subject: Reply with quote

Buy a replacement engine from a breakers and sell the borked one to someone/anyone. Thumbs Up
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

MarJay
But it's British!



Joined: 15 Sep 2003
Karma :

PostPosted: 20:43 - 06 Jan 2014    Post subject: Reply with quote

Weld that and you'll never know if there is debris inside the bottom end and gearbox. You could ride it and it blow up after five minutes. In fact, I'm fairly certain that is what will happen.

I think you were comprehensively unlucky, and the bike is scrap. Sorry.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F; Cheap project: CBR900RR FireBlade
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :

PostPosted: 20:44 - 06 Jan 2014    Post subject: Reply with quote

Cant see it that well, (phonecam? ) but as misscrabstick says
Is that a loose chain in there?
oil pump or starter gear chain maybe?
seems a bit light for a cam chain but what do I know?
I dont know the bike, but if it were mine the case repair wouldnt worry me as much as possible internal damage.
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts

andybow
L Plate Warrior



Joined: 06 Jan 2014
Karma :

PostPosted: 21:17 - 06 Jan 2014    Post subject: Reply with quote

yeah guys the pic was taken on a phone cam, until i saw that i thought she would be up and running in no time, felt sick almost when i saw it, whats the cost of another engine does anyone know? by what you are all saying i'm assuming you wouldn't suggest stripping the engine to see for internal damage? and i take it there is no such thing as a replacement engine case?

thanks for all the suggestions,
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :

PostPosted: 21:21 - 06 Jan 2014    Post subject: Reply with quote

Little point in stripping it down to check for damage unless you know what you're doing, or have plenty of time to learn.

For engine prices check out eBay and fill in some of the various part finder websites.
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

andybow
L Plate Warrior



Joined: 06 Jan 2014
Karma :

PostPosted: 21:24 - 06 Jan 2014    Post subject: Reply with quote

Ste wrote:
Little point in stripping it down to check for damage unless you know what you're doing, or have plenty of time to learn.

For engine prices check out eBay and fill in some of the various part finder websites.


it wouldnt be me stripping it, one ov my good friends is a dab hand with engines he would know what to look for, ok mate will do cheers
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :

PostPosted: 22:04 - 06 Jan 2014    Post subject: Reply with quote

Replacement engine case?
Forget it
Dont try spinning it up on the starter
Just get your mate to remove the clutch cover and sump
and check it out for debris and damage.
If its saveable you can think about a new clutch cover and case repair
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts

davebike
World Chat Champion



Joined: 15 Nov 2013
Karma :

PostPosted: 08:42 - 07 Jan 2014    Post subject: Reply with quote

I think the motors had it
Get a second hand engine no way would it be sensible to even try to repair that unless you are a mechanic with serious alley welding skills

Total engine strip
Welded repair to crank case
rebuild engine

I would need to charge 1000/1500 just get another engine or break for parts

Dave
____________________
Dave
NC750Xdct + others at work !
[email protected]
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

dydey90
World Chat Champion



Joined: 01 Oct 2013
Karma :

PostPosted: 09:02 - 07 Jan 2014    Post subject: Reply with quote

Did you lowside onto a grinding wheel? Shocked
I'd say it can be welded, the material looks good so it's possible with the right skills and equipment.
As Dave says though, you'd need to completely strip and clean the engine, then there's no guarantee that it'll be right, or that you won't find more problems. If the bike had cut out after the crash then there could be all sorts of internal damage.

Personally, I'd give it a go if you have the time, can strip it yourself and know a good welder who you can trust. Otherwise, break it for parts.
____________________
This post is probably not serious and shouldn't be taken literally.
Past: CBR125,ER6f NINJA 650, ZZR600 Current: VFR750
 Back to top
View user's profile Send private message You must be logged in to rate posts

MarJay
But it's British!



Joined: 15 Sep 2003
Karma :

PostPosted: 09:43 - 07 Jan 2014    Post subject: Reply with quote

It's not worth the time or effort to repair it IMO.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F; Cheap project: CBR900RR FireBlade
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

0l0dom0l0
World Chat Champion



Joined: 21 Oct 2009
Karma :

PostPosted: 12:04 - 07 Jan 2014    Post subject: Reply with quote

That engine isn't going to be running without a strip down.

Personally I'd strip the engine down. You might get lucky and find that nothing else inside is fucked, in which case some new cases and a gasket set would see you fit.

Weather that's cheaper than a replacement engine from a breaker, probably not.
____________________
CBT Passed: 30/08/2009, Theory Passed: 31/08/2010, Mod 1 Passed: 6/9/2010, Mod 2 Passed: 13/09/2010. Restriction ended 13/09/2012.

Bikes: 2007 Derbi GPR 50, 1998 Yamaha Fazer 600 (written off), 2002 Yamaha Fazer 600, 1994 CBR 600F, 2003 Triumph Daytona 600, Kawasaki ZX6R J1.....Current: 2006 Yamaha FZ6, 1998 Suzuki TL1000R and a Honda VFR 400 NC30.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :

PostPosted: 12:37 - 07 Jan 2014    Post subject: Reply with quote

When my ZX6R engine had the clutch basket break into lots of pieces (the previous owner was doing wheelies when it broke Laughing), a very low milage replacement engine was fitted.

The engine that had died was well overdue a major service and hadn't had an easy life. The cost of the replacement engine minus what I sold the broken engine for was quite a bit less than what a major service would have cost.

Mr. Green
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 316 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.06 Sec - Server Load: 0.51 - MySQL Queries: 13 - Page Size: 122.98 Kb