Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


CBR600RR-5 Rraddiatorr: rrepairr or rreplace?

Reply to topic
Bike Chat Forums Index -> The Workshop Goto page 1, 2  Next
View previous topic : View next topic  
Author Message

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 13:43 - 06 Jan 2014    Post subject: CBR600RR-5 Rraddiatorr: rrepairr or rreplace? Reply with quote

Asking for a workmate.

Bit of a dribbly radiator.

Arrow £3 of Radweld.
Arrow £50 - £100 for a radiator repair.
Arrow ~£100 + import mugging + wait on a new pattern part from China.
Arrow ~£200 on probably the same pattern part from a UK seller.
Arrow ~£200 for a salvage part from a UK breaker. Shocked
Arrow ~£500 for a new Honda part. Pale

What, why, and from whom?
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

DrSnoosnoo
World Chat Champion



Joined: 28 Mar 2012
Karma :

PostPosted: 13:49 - 06 Jan 2014    Post subject: Reply with quote

Try the Radweld first because it's cheap cheap cheap. Then if that doesn't work, spending 100 quid + 3 quid isn't much of a difference.
____________________
I'm Sam; Northern, Ginger, Lover
Did have: '95 ZZR600 '83 CG125 '97 ZZR1100 '15 Hypermotard 821 SP Do Have: '10 ZX10R
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :

PostPosted: 13:52 - 06 Jan 2014    Post subject: Reply with quote

Radiators are relatively easy to make. All the manufacturer would need are the top and bottom tanks.

I used to have radiators built from scratch by a company who were in Mossend. (Not sure if anyone in Glasgow area exists since Thatcher closed Scottish Industry before she was sacked from the Kremlin.)

I bet there is still somewhere regional if not local who'll make one to suit.


A quick google found this for a 1lt Nissan Micra

https://www.adrad.co.uk/prices/prices.php?id=NI393&model=MICRA&make=NISSAN

100 seems a lot for a fecking auld radiator...

And....

https://www.adrad.co.uk/prices/prices.php?id=NI393&model=MICRA&make=NISSAN

If doing the rad also consider overhauling/replacing the pump too. And of course all new rubber/s.
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :

PostPosted: 13:55 - 06 Jan 2014    Post subject: Reply with quote

snoosnoo wrote:
Try the Radweld first because it's cheap cheap cheap. Then if that doesn't work, spending 100 quid + 3 quid isn't much of a difference.


Barrs Leaks work far better than Radweld.

I use it on heavy plant and gensets.
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts

MarJay
But it's British!



Joined: 15 Sep 2003
Karma :

PostPosted: 14:08 - 06 Jan 2014    Post subject: Reply with quote

Get the radiator repaired. It's not worth the risk on a bike like that IMO. Plus radweld and their ilk can block up the small coolant channels in a motorcycle engine and cause problems.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F; Cheap project: CBR900RR FireBlade
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :

PostPosted: 14:11 - 06 Jan 2014    Post subject: Reply with quote

MarJay wrote:
Get the radiator repaired. It's not worth the risk on a bike like that IMO. Plus radweld and their ilk can block up the small coolant channels in a motorcycle engine and cause problems.


Barrs leaks is soluble and not harmful if used correctly.

But repair or replace as a last measure a sealant strictly as first aid.
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts

Robby
Dirty Old Man



Joined: 16 May 2002
Karma :

PostPosted: 14:18 - 06 Jan 2014    Post subject: Reply with quote

Get a used one on ebay. Ignore the buy-it-now auctions, either find someone breaking the whole bike or bid on an auction until you win one for cheap.
 Back to top
View user's profile Send private message You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :

PostPosted: 15:14 - 06 Jan 2014    Post subject: Reply with quote

I agree waiting for stuff from abroad can sometimes be a chore
but this one in the USA may be worth considering.

https://www.ebay.com/itm/HONDA-2003-2004-2005-2006-CBR600RR-F5-OEM-REPLACEMENT-RADIATOR-NEW-/251414038928#shpCntId

$100 + $21.37 P&P +$30.53 estimated import duties
comes out to 92.75 GBP

There are still places in the Uk that will recore a rad but somehow I doubt you'll get much, if any, change from a oner.
You can always ask though

Depending on the location of the leak and the material of the rad
(brass/alloy/plastic) sometimes its possible to do a local repair or patch.

Never had much luck with all the magic stuff in can/snakeoil shit.
A good second hand one at a decent price with a cast iron guarantee would be nice if such a thing exists.
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts

charlie74
Trackday Trickster



Joined: 03 Mar 2013
Karma :

PostPosted: 15:20 - 06 Jan 2014    Post subject: Reply with quote

personal preference would be K-seal. or pricing up a re-core

lastime ( only time) ive had a rad recored it was for a jap import mpv, £150 v £350+vat and 3 week wait
so in that case it made sence, plus they added an extra layer of something to increase the cooling capacity for no extra
 Back to top
View user's profile Send private message You must be logged in to rate posts

dydey90
World Chat Champion



Joined: 01 Oct 2013
Karma :

PostPosted: 15:24 - 06 Jan 2014    Post subject: Reply with quote

Just bung up the leaky tubes, it's winter!

Also, I think there should have been more rrrrrr's in the thread title.
____________________
This post is probably not serious and shouldn't be taken literally.
Past: CBR125,ER6f NINJA 650, ZZR600 Current: VFR750
 Back to top
View user's profile Send private message You must be logged in to rate posts

0l0dom0l0
World Chat Champion



Joined: 21 Oct 2009
Karma :

PostPosted: 15:52 - 06 Jan 2014    Post subject: Reply with quote

Personally I'd get a new one from China. Bought some radiators for the TL 1000R From China and they're fansatic.
____________________
CBT Passed: 30/08/2009, Theory Passed: 31/08/2010, Mod 1 Passed: 6/9/2010, Mod 2 Passed: 13/09/2010. Restriction ended 13/09/2012.

Bikes: 2007 Derbi GPR 50, 1998 Yamaha Fazer 600 (written off), 2002 Yamaha Fazer 600, 1994 CBR 600F, 2003 Triumph Daytona 600, Kawasaki ZX6R J1.....Current: 2006 Yamaha FZ6, 1998 Suzuki TL1000R and a Honda VFR 400 NC30.
 Back to top
View user's profile Send private message You must be logged in to rate posts

DrDonnyBrago
World Chat Champion



Joined: 03 Jan 2010
Karma :

PostPosted: 17:00 - 06 Jan 2014    Post subject: Reply with quote

Depends where it is leaking from.

About 3 years ago mine was leaking from one of the corroded header tanks, so I had it TIG'd at a local radiator repair place then I painted it. Still leak free but it was a bit of a risk as the metal was so thin. Rads seem to be way overpriced, I've seen breakers asking for £100+ for crashed, bent and popped shitters.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 19:43 - 06 Jan 2014    Post subject: Reply with quote

Cheers, all. They do run eye-wateringly expensive and no mistake, I think I'll order / fettle up a screen for Ze Beemer while it's in my mind.

I'd hesitate to recommend a chemical sealant for a bike, although I dumped some petrol station Radweld in my C3 about 3 years back and it did the job and hasn't deaded it yet.

Bars Leaks looks interesting, I might point it out, without recommending it as such.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 19:56 - 06 Jan 2014    Post subject: Reply with quote

To minimise risk of it ruining the internals, could you not just remove it from the bike and block the exits of the rad off, fill with rad weld and then re-attach after you have drained the remains out?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 22:14 - 06 Jan 2014    Post subject: Reply with quote

Paddy. wrote:
To minimise risk of it ruining the internals, could you not just remove it from the bike and block the exits of the rad off, fill with rad weld and then re-attach after you have drained the remains out?

Thinking Shocked

There's not enough Thumbs UpVery HappyThumbs Up for that.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :

PostPosted: 22:34 - 06 Jan 2014    Post subject: Reply with quote

Paddy. wrote:
To minimise risk of it ruining the internals, could you not just remove it from the bike and block the exits of the rad off, fill with rad weld and then re-attach after you have drained the remains out?


It needs some heat to 'cure' chemical sealant.
Something to do with heat and contact with air.
And if it was off the bike you would struggle to get circulation and heat into it.
There are no wee holes to clog in an engine. Nothing smaller than the tubes in the radiator. The only wee passage will be the bleeder hole in the temperature regulator (if is has one).


***walloper make PA***

Forum Chemists to the thread.
Forum Chemists to the thread.
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts

weasley
World Chat Champion



Joined: 16 Oct 2010
Karma :

PostPosted: 22:40 - 06 Jan 2014    Post subject: Reply with quote

Can it not be recored?
____________________
Yamaha XJ600 | Yamaha YZF600R Thundercat | KTM 990 SMT | BMW F900XR TE
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 23:21 - 06 Jan 2014    Post subject: Reply with quote

weasley wrote:
Can it not be recored?

Of course it can be re-cored, but why spend more than you have to?

I'd imagined that pouring boiling water into the radiator once it's off the bike should cure the gloop. If not, nothing much lost, it'd be coming off anyway for repair or replacement.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :

PostPosted: 23:28 - 06 Jan 2014    Post subject: Reply with quote

Rogerborg wrote:
weasley wrote:
Can it not be recored?

Of course it can be re-cored, but why spend more than you have to?

I'd imagined that pouring boiling water into the radiator once it's off the bike should cure the gloop. If not, nothing much lost, it'd be coming off anyway for repair or replacement.


It needs to circulate. Rolling Eyes Very Happy

The problem is it may just form a bolus in there when you add the hoat-wahtur.

Leave it on the beast.
Warn the engine and add the shit.
Run the engine till the fan kicks in or take it for a wee hurl.
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 23:33 - 06 Jan 2014    Post subject: Reply with quote

Use water from kettle, close to proper water temp at the beginning of summer anyway... circulate by shaking.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

cb1rocket
World Chat Champion



Joined: 30 Jan 2010
Karma :

PostPosted: 00:40 - 07 Jan 2014    Post subject: Reply with quote

Find leak, and use a high temp sealant etc
____________________
Honda H100S2 Rebuild - https://www.bikechatforums.com/viewtopic.php?t=253852
 Back to top
View user's profile Send private message You must be logged in to rate posts

Easter Bunny
World Chat Champion



Joined: 20 Aug 2010
Karma :

PostPosted: 01:15 - 07 Jan 2014    Post subject: Reply with quote

I bought the ST1100 a new Copper & Zinc copy from East End Radiators in Glasgow 01415545281 at £250 delivered it was about £100 less than an original from David Silver.


I've always used Bars stop leak never failed apart from this time LOL
____________________
The light at the end of the tunnel is an oncoming train!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

0l0dom0l0
World Chat Champion



Joined: 21 Oct 2009
Karma :

PostPosted: 08:56 - 07 Jan 2014    Post subject: Reply with quote

The way I see it, is any form of crap repair on a bike like that is going to be noticed when the bike is sold on. If I was a buyer and I saw a radiatior repair I would use that as a tool to get money off.

If you spend £100 on a new one from China it seems a bit of a no brained really. I can't stress how good the rads are from China.
____________________
CBT Passed: 30/08/2009, Theory Passed: 31/08/2010, Mod 1 Passed: 6/9/2010, Mod 2 Passed: 13/09/2010. Restriction ended 13/09/2012.

Bikes: 2007 Derbi GPR 50, 1998 Yamaha Fazer 600 (written off), 2002 Yamaha Fazer 600, 1994 CBR 600F, 2003 Triumph Daytona 600, Kawasaki ZX6R J1.....Current: 2006 Yamaha FZ6, 1998 Suzuki TL1000R and a Honda VFR 400 NC30.
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 10:47 - 07 Jan 2014    Post subject: Reply with quote

0l0dom0l0 wrote:
The way I see it, is any form of crap repair on a bike like that is going to be noticed when the bike is sold on. If I was a buyer and I saw a radiatior repair I would use that as a tool to get money off.


If you can see the back of the radiator on a CBR600RR while its in place, I'll eat a raw onion soaked in hot sauce Laughing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

0l0dom0l0
World Chat Champion



Joined: 21 Oct 2009
Karma :

PostPosted: 12:00 - 07 Jan 2014    Post subject: Reply with quote

Paddy. wrote:
If you can see the back of the radiator on a CBR600RR while its in place, I'll eat a raw onion soaked in hot sauce Laughing


I see no mention of the leak coming from the back Wink.

But general condition of the radiator regardless I suspect would be poor if it's leaking and been mended.
____________________
CBT Passed: 30/08/2009, Theory Passed: 31/08/2010, Mod 1 Passed: 6/9/2010, Mod 2 Passed: 13/09/2010. Restriction ended 13/09/2012.

Bikes: 2007 Derbi GPR 50, 1998 Yamaha Fazer 600 (written off), 2002 Yamaha Fazer 600, 1994 CBR 600F, 2003 Triumph Daytona 600, Kawasaki ZX6R J1.....Current: 2006 Yamaha FZ6, 1998 Suzuki TL1000R and a Honda VFR 400 NC30.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 316 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.07 Sec - Server Load: 0.56 - MySQL Queries: 13 - Page Size: 130.03 Kb