Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Indicators on my suzuki RF600

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

jackieflan00
L Plate Warrior



Joined: 27 Jul 2013
Karma :

PostPosted: 13:06 - 27 Jul 2013    Post subject: Indicators on my suzuki RF600 Reply with quote

hi,
i recently purchased a 1994 suzuki rf600, i took the rear indicators off the bike as they were corroded and rusted, and i want to replace them with some LED indicators.
i bought some 16LED indicators from ebay that i have tested with a power supply and they work, however when i connect them to the bike they don't light up at all, the front indicators light up as normal (flashing faster as they would if a bulb had gone).
i couldn't find any help online as people usually have the flashing problem when they flash too fast as apposed to not atall.
i also cant find a decent wiring diagram of the bike that isnt all blurey.

im new to the whole forum thing so any help would be greatly appreciated

thanks
Jackieflan00
 Back to top
View user's profile Send private message You must be logged in to rate posts

jjdugen
World Chat Champion



Joined: 03 Jun 2011
Karma :

PostPosted: 13:25 - 27 Jul 2013    Post subject: Reply with quote

usually reversing the connections works. LEDs are diodes, current only flows in one direction. You will probably find that your flash rate will still be too high as the LED's are a much lower resistance than the bulbs you had originally. Try hooking a 20Watt 20 /25 ohm resister across the two leads, this usually balanced the load. (Or just get a solid state flasher relay, fit and forget).
____________________
The CBR900RR has been sold. Aprilia Falco worms its way into my heart.
Try Soi 23 on Amazon for a good read.... Self promotion? Moi?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Timmeh
World Chat Champion



Joined: 01 Nov 2006
Karma :

PostPosted: 15:18 - 27 Jul 2013    Post subject: Reply with quote

jjdugen wrote:
Try hooking a 20Watt 20 /25 ohm resister across the two leads


the resistor needs to be in series, not parallel duder.
____________________
GSXR400 x2 | '94 RVF400 | '93 TZR125 4DL (again)
20:22:30 BLUEX5: i would love to be forced to undergo a**l plugging with different sizes
20:48:18 Temeluchus: comp you hunk of smouldering homos3x you
 Back to top
View user's profile Send private message You must be logged in to rate posts

jjdugen
World Chat Champion



Joined: 03 Jun 2011
Karma :

PostPosted: 06:01 - 28 Jul 2013    Post subject: Reply with quote

Its much of a muchness where you put the resistor. I put it in parallel with the LED unit to replicate the bulb filament. Just as long as the flasher unit is seeing a load it will work.
(Having re-read my post, I should clarify, the resistor goes across, (or in line) with the two leads going to each individual indicator unit).
____________________
The CBR900RR has been sold. Aprilia Falco worms its way into my heart.
Try Soi 23 on Amazon for a good read.... Self promotion? Moi?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Kuz66
L Plate Warrior



Joined: 07 Jan 2014
Karma :

PostPosted: 19:44 - 07 Jan 2014    Post subject: Reply with quote

Jackie,
I have a 95 RF600 R and I am trying to do the same thing, and I was wondering if you found anything that works or if the resistor worked?
 Back to top
View user's profile Send private message You must be logged in to rate posts

nowhere.elysium
The Pork Lord



Joined: 02 Mar 2009
Karma :

PostPosted: 19:49 - 07 Jan 2014    Post subject: Reply with quote

LED indicators are crap anyway, so just stick with incandescents.
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kuz66
L Plate Warrior



Joined: 07 Jan 2014
Karma :

PostPosted: 21:36 - 07 Jan 2014    Post subject: Reply with quote

the problem is, that I already paid for the led ones, and with the modification I had to do i had to go with the smaller base turn signals anyway. I'm just not sure what resistors to buy or where to get them.
 Back to top
View user's profile Send private message You must be logged in to rate posts

TheCatSatOnTh...
Scooby Slapper



Joined: 30 Nov 2013
Karma :

PostPosted: 21:41 - 07 Jan 2014    Post subject: Reply with quote

Search eBay for "motorcycle led resistors" and you should find appropriate items.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 21:58 - 07 Jan 2014    Post subject: Reply with quote

Timmeh wrote:
jjdugen wrote:
Try hooking a 20Watt 20 /25 ohm resister across the two leads


the resistor needs to be in series, not parallel duder.


Parallel. You're trying to increase the current draw so that the electromechanical relay works correctly. Thumbs Up

The simplest solution and the most energy effective is to fit an electronic flasher relay. They don't have a load dependent flash rate.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 315 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.05 Sec - Server Load: 0.14 - MySQL Queries: 13 - Page Size: 59.36 Kb