CG question

Keith · World Chat Champion Joined: 24 Mar 2004 Karma :

Right you intelligent lot.

I got my CG brazilian back from the mechanic and its all super, but he recommended that I find a new carb as the one on it is in a bit of a state.

Could anyone inform me what carb is on this bike? (1990 model)

I've google'd it but to no result. If I can find out what make/size it is, then I'll be able to find one no problem.

Thanks in advance to any help. Thumbs Up

Merry christmas! Mr. Green

____________________
Aprilia RSV Mille R Edwards Replica - Aprilia RS250 - Suzuki GSXR600 Supersport Race Bike

ts50x0 · Spanner Monkey Joined: 16 May 2004 Karma :

you need to go to your local breakers and ask them if they have one for it it. theyll know what carb it is,
i wouldnt buy new as they are really expensive, were talkin half as much as the bike is worth mate.

Keith · World Chat Champion Joined: 24 Mar 2004 Karma :

Yeah. I will. But I need to find out what carb it is and whether its different to any of the more modern versions. I've been looking around breakers web sites and most of them only have carbs for the CG CDI model. Confused

I think I best consult David Silver spares, or my friends Haynes manual.
____________________
Aprilia RSV Mille R Edwards Replica - Aprilia RS250 - Suzuki GSXR600 Supersport Race Bike

K!K @ · Nova Slayer Joined: 22 Dec 2004 Karma :

Contact Honda and they will tell you where to find one or how much it will be from them.
____________________
Suzuki AY50 Katana
~Elite~Knights~

RS1Banger · Scooby Slapper Joined: 08 Oct 2004 Karma :

may as well fit a bigger carb
if its possible

mattsmith95 · Traffic Copper Joined: 03 Oct 2004 Karma :

Keith · World Chat Champion Joined: 24 Mar 2004 Karma :

Because its a big blob of corrosion. Laughing

Dont worry, he's a reliable mechanic. Wink

Besides, carbs arent expensive and come by quite often on ebay and breakers. I just need to know whether one from a newer model will bolt into my old Brazilian.

Thinking

____________________
Aprilia RSV Mille R Edwards Replica - Aprilia RS250 - Suzuki GSXR600 Supersport Race Bike

bikedudextrm · Traffic Copper Joined: 16 Oct 2003 Karma :

Why not just have a good look at the carb, it must have the name of the manufacturer on it somewhere and a part code.
____________________
Police

https://www.bikepics.com/members/bikedudextrm/

mchaggis · World Chat Champion Joined: 09 May 2004 Karma :

I can go and look at my Mums '93 Brazilian model in the garage outside tomorrow (later today, why am I up at this time? Confused

) Failing that, we've a Haynes manual for it somewhere in which I can have a gander.

No guarantees that the '93 is the same as the '90, but I don't see too many reasons why not at the minute.
____________________
I must not be a troll...
Mmmm, Guinness
Discovering the delights of Hammerite and a 3/4" brush. Very Happy

Kickstart · The Oracle Joined: 04 Feb 2002 Karma :

Keith · World Chat Champion Joined: 24 Mar 2004 Karma :

Claud 14.7 to 1 · World Chat Champion Joined: 06 May 2004 Karma :

Get carb/take apart, put in Coke (as in a-cola coke) Laughing

, wait a few hours. Good for cleaning.

More cleaning and put it together. Done.

mchaggis · World Chat Champion Joined: 09 May 2004 Karma :

From the Haynes manual:

Carburettor

Machine: CG125 (BR)-E/F, J
ID number: PD47C-A or D-A
Main jet: 90 (95*)
Pilot (slow) jet: 38
Needle jet: E2052J (E2352H*)
Needle jet clip position - grooves from top: 4th (2nd)
Pilot screw - turns out from fully closed: 1 3/8
Float height: 14.0 mm (0.55 in)
Idle speed: 1400 +- 100 rpm

Machine: CG125 (BR)-K
ID number: PD47F
Main jet: 95
Pilot (slow) jet: 35
Needle jet: not available
Needle jet clip position - grooves from top: not available
Pilot screw - turns out from fully closed: 1 1/2
Float height: 14.0 mm (0.55 in)
Idle speed: 1400 +- 100 rpm

Those are directly lifted from the Haynes manual. The asterisk refers to the section of the manual dealing with the carburettor overhaul, so it'd be easier just to see the manual for those.

If you go to a decent spares place and tell them exactly what you want (a carburettor for a '90 CG125 (BR) -?) then they should be able to work out exactly what you need. I was mistaken saying that it was a '93 model apparently, H is '91.
____________________
I must not be a troll...
Mmmm, Guinness
Discovering the delights of Hammerite and a 3/4" brush. Very Happy

Keith · World Chat Champion Joined: 24 Mar 2004 Karma :

Thanks for the above. Thumbs Up

Mines also a H reg, but on the frame, I believe it says "BR-J."

I may take the carb out through the week, give it a thorough cleaning then try get it back to its standard settings.

Thanks for the information though, much appreciated. Very Happy

____________________
Aprilia RSV Mille R Edwards Replica - Aprilia RS250 - Suzuki GSXR600 Supersport Race Bike