Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Chain calculations

Reply to topic
Bike Chat Forums Index -> Dear Auntie BCF...
 Topic moved: from Random Banter to Dear Auntie BCF... by G (15 Feb 2014 - 20:39)
View previous topic : View next topic  
Author Message

Nick 50
World Chat Champion



Joined: 24 Jul 2011
Karma :

PostPosted: 18:27 - 15 Feb 2014    Post subject: Chain calculations Reply with quote

As part of a project at uni, we had to design a drive system to transmit from a Yasa400 for a formula student car.

Our lecturer allowed us to use gears, belt or chain, though he only guided through the gear choice. I decided to go down the chain and sprocket route.

Never having done something like this before, much googling was needed.

I came across:

https://chain-guide.com/
https://www.hpcgears.com/

But I used the very good:

https://www.iwis.de/uploads/tx_sbdownloader/KettenHandbuch_E.pdf

My parameters were to transmit 220Nm Torque, 150hp, with a speed of 1600rpm.

Like hell could I find a chain strong enough with the calculations involved.

So my question, is there a differing way of doing the calculations? MotoGP bikes use 1 chain and cope fine, but all the guides I used were coming out with that I had to use a triplex chain and have 3 rows of them to cope Confused

Anyone have any insight into chain calculations?
____________________
Current Bikes: ZX7r 97 (Black Beauty), VFR400 NC24 (The banana)
Previous Bikes: Aprilia Tuono 03 (The Beast), CBR600f (97)
First bike: A GZ125 Lemon.......
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 18:48 - 15 Feb 2014    Post subject: Reply with quote

A 530 DiD VM grade x-ring chain such as one would find on a sportsbike has a tensile strength of 43.1 KN.

A 530 single pitch roller chain such as one would find running a coveyor belt has a tensile strength of 29.7KN.

Are your charts using the right sort of chain? Motorcycle final drive chain is NOT the same as industrial drive chain.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 18:57 - 15 Feb 2014    Post subject: Reply with quote

Hi

220Nm is a lot of torque, but at very low rpm. You will need very high gearing to get that to give you a reasonable top speed (assuming your tyres aren't from a tractor). If you were running a gearbox before the final drive then the torque at the chain will be a fraction of the figure you quote.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Nick 50
World Chat Champion



Joined: 24 Jul 2011
Karma :

PostPosted: 19:28 - 15 Feb 2014    Post subject: Reply with quote

stinkwheel wrote:
A 530 DiD VM grade x-ring chain such as one would find on a sportsbike has a tensile strength of 43.1 KN.

A 530 single pitch roller chain such as one would find running a coveyor belt has a tensile strength of 29.7KN.

Are your charts using the right sort of chain? Motorcycle final drive chain is NOT the same as industrial drive chain.


That was my thinking, but I can't find any charts for motorcycle standard chains. So it was very hard to prove that a chain would work.

I ended up selecting an AFAM 520RXX-GG chain.

Kickstart wrote:
Hi

220Nm is a lot of torque, but at very low rpm. You will need very high gearing to get that to give you a reasonable top speed (assuming your tyres aren't from a tractor). If you were running a gearbox before the final drive then the torque at the chain will be a fraction of the figure you quote.

All the best

Keith


To be honest I opted to turn the Torque down as it can push out 400Nm. I opted for a 3:1 ratio to the axle (all theoretical).
The load case was for a 75m acceleration run so not needing a big top end speed.
____________________
Current Bikes: ZX7r 97 (Black Beauty), VFR400 NC24 (The banana)
Previous Bikes: Aprilia Tuono 03 (The Beast), CBR600f (97)
First bike: A GZ125 Lemon.......
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 19:33 - 15 Feb 2014    Post subject: Reply with quote

Nick 50 wrote:


That was my thinking, but I can't find any charts for motorcycle standard chains. So it was very hard to prove that a chain would work.

I ended up selecting an AFAM 520RXX-GG chain.

https://www.didchain.com/images/usaspecs2010b.jpg

https://www.oppracing.com/images/cmsuploads/Large_Images/ek%20chain%20comparison%20specifications%20from%20oppracing.jpg
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 19:58 - 15 Feb 2014    Post subject: Re: Chain calculations Reply with quote

Have a look at what existing rear/mid bike engined kit car use - generally they'll use a chain drive. They can easily handle the sort of specs you mention.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 20:04 - 15 Feb 2014    Post subject: Reply with quote

Hi

DID chain specs (for some chains) are here:-

https://www.didchain.com/chainSpecs.html

As an aside, your 220Nm is just under double that of my 1200 Bandit but at about 1/5 of the rpm. So assuming the same size wheel and 1:3 gearing on the final drive sprockets, to do 53mph you would need about 5 times higher gearing compared to the Bandit in 1st gear (stock gearing puts peak torque at 53mph), which would give you about 1/3 of the torque on the chain.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

swampy
World Chat Champion



Joined: 04 Aug 2004
Karma :

PostPosted: 20:28 - 15 Feb 2014    Post subject: Reply with quote

How come this thread has been pretty much exclusively replied to by mods, but none of them have moved it to 'Dear Aunty BCF' ?

Thinking Tut Tut Wink

Edit: Thats better, but don't make me get all self righteous on your asses again Laughing
____________________
"I hate to advocate drugs, alcohol, violence or insanity to anyone, but they've always worked for me." Hunter S Thompson
"Faster, faster, faster, until the thrill of speed overcomes the fear of death..." Hunter S Thompson
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 277 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Dear Auntie BCF... All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.06 Sec - Server Load: 0.48 - MySQL Queries: 16 - Page Size: 62 Kb