Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Chain come undone at split link

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

TaeKwon125
Borekit Bruiser



Joined: 08 Jul 2013
Karma :

PostPosted: 10:00 - 18 Feb 2014    Post subject: Chain come undone at split link Reply with quote

Hey,

I was riding home last night and my chain came undone.

On inspection it has come apart at the split link. What usually causes this? I lubricated the chain and checked the tension about 2 months ago, the chain and sprockets were new less than a year ago.

I am currently intending to inspect the chain and sprockets and if there is no damage then refit the split link and use again. Unless there is a reason that I should not.

The bike is a 200 cg125 W.

Thanks very much, Olli
 Back to top
View user's profile Send private message You must be logged in to rate posts
_Iain_ This post is not being displayed because the poster is banned. Unhide this post / all posts.

anthony_r6
World Chat Champion



Joined: 31 Mar 2011
Karma :

PostPosted: 10:16 - 18 Feb 2014    Post subject: Reply with quote

I had one come off my NSR, though the chain stayed on. I would rather add a riveted link to make sure it's not gonna come off in that manner again.

Was it possibly put on the wrong way? I'd probably order a new one if you're going to use the split link again.
____________________
Ted : "Maybe he's agoraphobic."
Dougal : "Jack scared of fighting? I don't think so, Ted."
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 10:55 - 18 Feb 2014    Post subject: Reply with quote

If the chain and sprockets are in good condition then fit a new split link and make sure that the closed end points in the direction of chain travel.
 Back to top
View user's profile Send private message You must be logged in to rate posts

TaeKwon125
Borekit Bruiser



Joined: 08 Jul 2013
Karma :

PostPosted: 11:08 - 18 Feb 2014    Post subject: Reply with quote

Thanks for the replies, looks like the consensus is that the split link may have been on the wrong way.

If the chain and sprockets are in good nick still I will fit a new split link the right way around and take it easy for the first few miles.

Thanks very much.
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 11:45 - 18 Feb 2014    Post subject: Re: Chain come undone at split link Reply with quote

TaeKwon125 wrote:
I lubricated the chain and checked the tension about 2 months ago, the chain and sprockets were new less than a year ago.


Er? Laughing Is this not a weekly, even 2 or 3 day check for you Shocked
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

TaeKwon125
Borekit Bruiser



Joined: 08 Jul 2013
Karma :

PostPosted: 11:59 - 18 Feb 2014    Post subject: Reply with quote

Nope, I ride about 20-40 miles a week. Should it still be?
 Back to top
View user's profile Send private message You must be logged in to rate posts
_Iain_ This post is not being displayed because the poster is banned. Unhide this post / all posts.

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 12:33 - 18 Feb 2014    Post subject: Reply with quote

TaeKwon125 wrote:
Nope, I ride about 20-40 miles a week. Should it still be?


I check mine weekly at the longest. Shocked
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 12:37 - 18 Feb 2014    Post subject: Reply with quote

If it was put on the wrong way round a year ago, it would have come off by now.

It came off because it's a splitlink and they do that. People on here are very quick to blame the user. Yes you should have checked your chain more frequently but in my experience, splitliks are prone to failure. They are a definate weak point and any chain will always fail at the weakest link.

I've had several splitlinks either come off or fail altogether over the years and they most certainly were put on correctly (Unless anyone is suggesting that having had two fail, I didn't make absolutely certain the third and fourth ones were fitted and seated correctly).

The last one failed after less than 1,000 miles and within a week of fitting it on my KLE500. I simply refuse to use them now.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 13:59 - 18 Feb 2014    Post subject: Reply with quote

Some people lock wire split links for the this reason.

It may be a quality issue - a bottom of the range cheap Chinese chain is presumably much more likely to have issues than a decent brand name one you might see on a drag bike and the like.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Commuter_Tim
World Chat Champion



Joined: 08 May 2013
Karma :

PostPosted: 20:56 - 18 Feb 2014    Post subject: Reply with quote

G wrote:
Some people lock wire split links for the this reason.


Could you elaborate on what lock wire is for a noob please?
or were you just advocating the use of riveted?
____________________
The above post is most likely nonsensical.

I ride a Bandit 600... badly.
 Back to top
View user's profile Send private message You must be logged in to rate posts
- This post is not being displayed because the poster has bad karma. Unhide this post / all posts.

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 21:52 - 18 Feb 2014    Post subject: Reply with quote

Lock wire is used to prevent things vibrating off and so on - for instance on race bikes you have to lock wire the sump bolt.
You drill a hole through the head of the bolt, then put the wire through the hole, attach it to another part of the bike and twist the wire to tighten it - this way even if the bolt comes loose, it can't turn more than a quarter turn or so.

You can also use it on a chain split link - generally wrapped around the link I believe.
 Back to top
View user's profile Send private message You must be logged in to rate posts

TaeKwon125
Borekit Bruiser



Joined: 08 Jul 2013
Karma :

PostPosted: 15:48 - 07 Mar 2014    Post subject: Reply with quote

I got a new split link, fitted it but the chain wasn't running quite right by my eye.

So I subsequently bought a new set of chain and sprockets, fitted them, double checked the orientation of the split link and all appears well. I didn't lock wire the split link as I was a little worried it would rub on the chain guard or the sprockets.

Thanks again for all your help. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

bikenut
World Chat Champion



Joined: 21 Nov 2011
Karma :

PostPosted: 11:34 - 08 Mar 2014    Post subject: link Reply with quote

:D i had a link plate go once, a ticking noise, so stopped and looked at chain, a link plate ( not the split link but an outer link plate ) had broken across tween the pins, just where it was stamped EK530!!

it has broken in line with the k from memory.........will find and post a pic....

the chain had done about 14k miles, with regular tlc and was in adjustment...........good sprockets also.

rode home ( 7 miles ) very slowly with my heart in my mouth all the way......... :karma:

never had an ek chain since, nor will i!
____________________
nuts about bikes
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 258 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.06 Sec - Server Load: 0.82 - MySQL Queries: 13 - Page Size: 92.61 Kb