Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


MOT approaching

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

CG Sam
Crazy Courier



Joined: 08 Apr 2013
Karma :

PostPosted: 18:38 - 01 Mar 2014    Post subject: MOT approaching Reply with quote

Hi all, not entirely sure if this should be here or in the new bikers section but I guess it counts as both. My bike is coming up to it's MOT and I was just wondering what they can fail on?
I know tyres, brakes, mirrors, blowing exhaust etc but are there any other things that aren't necessarily obvious that bikes fail on?

Thanks,
Sam
____________________
CG125, SV650S, CBR600F, GSXR600 SRAD
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

wr6133
World Chat Champion



Joined: 31 Dec 2013
Karma :

PostPosted: 18:41 - 01 Mar 2014    Post subject: Reply with quote

Wheel bearings, easy to check but people often don't
 Back to top
View user's profile Send private message You must be logged in to rate posts

doggone
World Chat Champion



Joined: 20 May 2004
Karma :

PostPosted: 19:03 - 01 Mar 2014    Post subject: Reply with quote

Worn steering head bearing is another one that's easily overlooked.
Also the number plate light is easily forgotten if it's separate from the tail light.
 Back to top
View user's profile Send private message You must be logged in to rate posts

........................
Spanner Monkey



Joined: 15 Jan 2014
Karma :

PostPosted: 19:04 - 01 Mar 2014    Post subject: Re: MOT approaching Reply with quote

CG Sam wrote:
Hi all, not entirely sure if this should be here or in the new bikers section but I guess it counts as both. My bike is coming up to it's MOT and I was just wondering what they can fail on?
I know tyres, brakes, mirrors, blowing exhaust etc but are there any other things that aren't necessarily obvious that bikes fail on?

Thanks,
Sam


It's all here

https://www.motuk.co.uk/manual/mc_contents.htm

Very straightforward really, check the obvious.
 Back to top
View user's profile Send private message You must be logged in to rate posts

clancy
World Chat Champion



Joined: 11 Apr 2009
Karma :

PostPosted: 19:37 - 01 Mar 2014    Post subject: Reply with quote

Buckled wheels, distorted bead rims aren't always obvious

Steering bearings as well are often classed as "notchy"

All three can easily be checked with the front wheel off the ground.

Most other things are obvious like you said mate
____________________
KLX 300r
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

CG Sam
Crazy Courier



Joined: 08 Apr 2013
Karma :

PostPosted: 19:40 - 01 Mar 2014    Post subject: Reply with quote

Am I right in thinking that to check the bearings you put the bike on it's centre stand and spin each wheel looking for smooth rotations, no or little elliptical movement and no knocking sounds?

The steering head is checked by moving the bars from full lock to full lock while on the stand isn't it?

Cheers for the link, about to read through it all now.

If I ask to watch the MOT be done will garages allow it?
____________________
CG125, SV650S, CBR600F, GSXR600 SRAD
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

brains_t
Nitrous Nuisance



Joined: 20 Jun 2013
Karma :

PostPosted: 19:43 - 01 Mar 2014    Post subject: Reply with quote

Delboy's you're friend

Pre MOT check
https://www.youtube.com/watch?v=uSC0MmS65qo
 Back to top
View user's profile Send private message You must be logged in to rate posts

clancy
World Chat Champion



Joined: 11 Apr 2009
Karma :

PostPosted: 19:43 - 01 Mar 2014    Post subject: Reply with quote

Yeah that's how you check all that mate

When looking for buckled wheels look along the wheel and side on from either side, large flat spots can be seen side on

Yeah they will let you watch mate, larger garages normally have a viewing area
____________________
KLX 300r
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

doggone
World Chat Champion



Joined: 20 May 2004
Karma :

PostPosted: 19:44 - 01 Mar 2014    Post subject: Reply with quote

CG Sam wrote:


If I ask to watch the MOT be done will garages allow it?


The one I go to is a one man band and needs me to help e.g hold brakes on while he puts a measured force on to test them.
It will vary, some won't be keen on anyone in workshop areas.
 Back to top
View user's profile Send private message You must be logged in to rate posts

........................
Spanner Monkey



Joined: 15 Jan 2014
Karma :

PostPosted: 19:51 - 01 Mar 2014    Post subject: Reply with quote

CG Sam wrote:
Am I right in thinking that to check the bearings you put the bike on it's centre stand and spin each wheel looking for smooth rotations, no or little elliptical movement and no knocking sounds?


Grab the wheel at the top and try rocking it from side to side, not in the direction of the rotation, if you see what I mean. If there's any play then it's likely your bearings need replacing. It's an easy job.
 Back to top
View user's profile Send private message You must be logged in to rate posts

FROGGYRIBBIT
Renault 5 Driver



Joined: 16 Nov 2007
Karma :

PostPosted: 19:53 - 01 Mar 2014    Post subject: Reply with quote

Leaking forks
binding brakes
____________________
If it aint broken dont fix it
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

CG Sam
Crazy Courier



Joined: 08 Apr 2013
Karma :

PostPosted: 20:33 - 01 Mar 2014    Post subject: Reply with quote

Cheers for all the advice, one last question. My front mudguard is cracked, is that something they could fail it on?
____________________
CG125, SV650S, CBR600F, GSXR600 SRAD
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

clancy
World Chat Champion



Joined: 11 Apr 2009
Karma :

PostPosted: 20:40 - 01 Mar 2014    Post subject: Reply with quote

If its connected it had to be secure, if it's not there they can't test it

So remove it for the mot mate, might as well play it safe, would such to fail for something that little
____________________
KLX 300r
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 20:51 - 01 Mar 2014    Post subject: Reply with quote

CG Sam wrote:
Cheers for all the advice, one last question. My front mudguard is cracked, is that something they could fail it on?


They COULD, depends on the testers oppinion/mood as to what constitutes "insecure".

I personally would tape over the crack with a bit of gaffa tape because a CG125 front mudgsard has an integral, pressed steel fork brace. The mudguard itself isn't required but the fork brace is.

Most places do free retests for minor fails so don't worry too much if it fails on something small like a cracked mudguard or incorrect healamp aim, you can go away, fix it and come back to show them it working the next day (I have been known to change wheel bearings on the pavement outside the MOT station).

Classic is flashers and horn which always seen to pick on the way to the MOT as the perfect time to stop working.

CG125s commonly fail on leaky fork seals, oval rear brake drums and loose spokes. MOT testers do love to ping spokes. Small cracks round the vent holes in brake discs (if fitted) are another favourite.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :

PostPosted: 21:39 - 01 Mar 2014    Post subject: Reply with quote

stinkwheel wrote:
Small cracks round the vent holes in brake discs (if fitted) are another favourite.


To be frank, if something that goes through the sort of stresses as a brake disk has a crack of any size in it, I'll be throwing the fucker away before it fails and results in the bike cartwheeling down the road.
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Triumph Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

CG Sam
Crazy Courier



Joined: 08 Apr 2013
Karma :

PostPosted: 22:49 - 01 Mar 2014    Post subject: Reply with quote

I actually have a spare mudguard, but I'm being lazy and it's not the right colour, I'll just swap it in the morning. My fork seals are fine, not had a spot of oil out in the time I've had her, no pitting on the forks either.

Cheers for all the help, will let you know how it goes. The previous MOT had one advisory for a binding front brake which we sorted before I even got her to mine.
____________________
CG125, SV650S, CBR600F, GSXR600 SRAD
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 264 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.33 Sec - Server Load: 0.86 - MySQL Queries: 13 - Page Size: 88.32 Kb