Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


So I'm guessing these pads are worn then...

Reply to topic
Bike Chat Forums Index -> The Workshop Goto page 1, 2  Next
View previous topic : View next topic  
Author Message
MC This post is not being displayed because the poster is banned. Unhide this post / all posts.

Rigga
World Chat Champion



Joined: 29 Nov 2012
Karma :

PostPosted: 13:09 - 02 Mar 2014    Post subject: Reply with quote

I think sintered are better in the wet, well they are on my mountain bike anyway Laughing
____________________
Current bike: Honda CBR 1100xx
 Back to top
View user's profile Send private message You must be logged in to rate posts

DrDonnyBrago
World Chat Champion



Joined: 03 Jan 2010
Karma :

PostPosted: 13:13 - 02 Mar 2014    Post subject: Re: So I'm guessing these pads are worn then... Reply with quote

They don't look that worn, quite a bit of meat left by the looks of it. The metal plate is the back plate whilst the shiny bit stuck to it just looks like sintered pad material.

Sintered pads are made from metal and other powders fused together in a process called sintering.

They just generally perform better than organic pads, look it up if you wish, could fill a book with it so not much point summarising it here. They are especially good in the rain on a wet brake disc.


Price isn't normally much different IME, I always go for HH sintered on the front though and whatever I can find cheap for the back.
 Back to top
View user's profile Send private message You must be logged in to rate posts
MC This post is not being displayed because the poster is banned. Unhide this post / all posts.

Easter Bunny
World Chat Champion



Joined: 20 Aug 2010
Karma :

PostPosted: 13:35 - 02 Mar 2014    Post subject: Reply with quote

I've had em down to the metal before, makes a nice noise Laughing
____________________
The light at the end of the tunnel is an oncoming train!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 13:37 - 02 Mar 2014    Post subject: Re: So I'm guessing these pads are worn then... Reply with quote

Not all pads have grooves.

Looks like there's life in them yet to me.

Sintered have bits of metal squished in to them, which should let the pads handle with more extreme situation as well as giving better braking in all conditions.
 Back to top
View user's profile Send private message You must be logged in to rate posts

bugeye_bob
World Chat Champion



Joined: 05 Sep 2013
Karma :

PostPosted: 13:43 - 02 Mar 2014    Post subject: Reply with quote

https://i703.photobucket.com/albums/ww33/JDM_Stig/IMAG0078_zps4382cbd8.jpg

They look safer then these rear pads, this was after they had just passed an MOT!
 Back to top
View user's profile Send private message You must be logged in to rate posts

almostthere
Traffic Copper



Joined: 28 Oct 2013
Karma :

PostPosted: 14:19 - 02 Mar 2014    Post subject: brake pads Reply with quote

Easter Bunny wrote:
I've had em down to the metal before, makes a nice noise Laughing


Also looks good at night when you get a shower of sparks every time you brake Laughing
____________________
Beer, It's the reason I get up every afternoon
www.mfairco.uk
 Back to top
View user's profile Send private message You must be logged in to rate posts

........................
Spanner Monkey



Joined: 15 Jan 2014
Karma :

PostPosted: 14:23 - 02 Mar 2014    Post subject: Reply with quote

How does the brake lever feel usually? Hard or spongy? Obviously now there won't be much resistance with the pads out with nothing pushing against the disc. Although with the pads out you can have a look to see if the brake piston is moving freely.
 Back to top
View user's profile Send private message You must be logged in to rate posts

evilbond
Two Stroke Sniffer



Joined: 02 Feb 2014
Karma :

PostPosted: 15:29 - 02 Mar 2014    Post subject: Reply with quote

MC wrote:
Hmm... I thought they were meant to have wear grooves, maybe that's just original pads?


Try taking a wire brush over it firmly, i cleaned up my front brakes recently and it too looked like a smooth surface untill i brushed them and the grooves magically appeared :o

They were caked in brake dust then the edges of the pads had worn into the grooves and filled em.
____________________
Bike: K2 Bandit 600S
Car: Astra GTC
 Back to top
View user's profile Send private message You must be logged in to rate posts

STONEY!
Brolly Dolly



Joined: 14 Sep 2005
Karma :

PostPosted: 15:39 - 02 Mar 2014    Post subject: Reply with quote

I'd run with those pads for miles yet, then again I superglued the friction material back on my superdreams pads lol
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

serlant
Brolly Dolly



Joined: 06 Jul 2009
Karma :

PostPosted: 16:00 - 02 Mar 2014    Post subject: Reply with quote

this is fucked
https://i191.photobucket.com/albums/z170/serlant/IMAG0182_zpsgv0axkdo.jpg

i'd say they've got 1 or 2 thousand in them atleast
____________________
04 CBR1000RR, 1995 Husqvarna TE410, 1998 VTR1000(Sold), 1990 XJ600(sold), 1996 KH125(dead and sold)
 Back to top
View user's profile Send private message You must be logged in to rate posts
MC This post is not being displayed because the poster is banned. Unhide this post / all posts.

flumpy7
Could Be A Chat Bot



Joined: 31 May 2008
Karma :

PostPosted: 16:18 - 02 Mar 2014    Post subject: Reply with quote

MC wrote:
TheBaldReverend wrote:
How does the brake lever feel usually? Hard or spongy? Obviously now there won't be much resistance with the pads out with nothing pushing against the disc. Although with the pads out you can have a look to see if the brake piston is moving freely.

Last couple of days felt a bit weak, hence why I took the pads out to have a looksy. Sometimes the front brake feels a little squirrely, (very) occasionally it'll squeak. I was scared of touching the front brake with the pads out, as I read something about the piston locking onto the disc & being a bitch to push back (dunno if that's true or not).


Yeah think about it makes sense. There's no pads so the piston will keep coming out until they trap the disc or fall out. Obviously you would need to pump a good few times for that to happen. If you want to test the caliper function, take it off the disc and pump a little to see if the pistons come out smoothly, then push back in by hand and if its all nice and clean it should go back easily. If not clean em up Thumbs Up
____________________
2012 Sinnis apache
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

andyscooter
World Chat Champion



Joined: 30 May 2009
Karma :

PostPosted: 17:10 - 02 Mar 2014    Post subject: Reply with quote

STONEY! wrote:
I'd run with those pads for miles yet, then again I superglued the friction material back on my superdreams pads lol


i had a garage do that to a bike of mine as they bought the wrong ones
they glued cut down the back plate and glued the pads onto the original ones to fit
____________________
gilera runner vxr200 (chavped)
if its spelt wrong its my fat fingers and daft auto correct on my tablet
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

smegballs
World Chat Champion



Joined: 28 Oct 2007
Karma :

PostPosted: 17:45 - 02 Mar 2014    Post subject: Reply with quote

andyscooter wrote:
STONEY! wrote:
I'd run with those pads for miles yet, then again I superglued the friction material back on my superdreams pads lol


i had a garage do that to a bike of mine as they bought the wrong ones
they glued cut down the back plate and glued the pads onto the original ones to fit


It's not actually that outlandish.

In days gone by, you could get your brake shoes refurbed with fresh friction material, same for clutch friction plates too.

There must be a few people still doing it, I'd imagine it's one of the only way to keep ancient cars/bikes on the road.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

STONEY!
Brolly Dolly



Joined: 14 Sep 2005
Karma :

PostPosted: 18:36 - 02 Mar 2014    Post subject: Reply with quote

yep, there's a guy near me who refurbs brakes and clutches with new material and rivets. £40 to refurb a chevy clutch that is near on impossible to get hold of.

I think a shop gluing your pads together is taking the mick a bit not to mention a potential lawsuit against them! but I guess if they made it completely clear to you what they where doing its fine.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

andyscooter
World Chat Champion



Joined: 30 May 2009
Karma :

PostPosted: 19:42 - 02 Mar 2014    Post subject: Reply with quote

I didn'tfind out till a week or so later when they fell off

Changed mechanic after that

Also found iI had been charged for service work not done as well
____________________
gilera runner vxr200 (chavped)
if its spelt wrong its my fat fingers and daft auto correct on my tablet
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Rigga
World Chat Champion



Joined: 29 Nov 2012
Karma :

PostPosted: 19:47 - 02 Mar 2014    Post subject: Reply with quote

andyscooter wrote:
STONEY! wrote:
I'd run with those pads for miles yet, then again I superglued the friction material back on my superdreams pads lol


i had a garage do that to a bike of mine as they bought the wrong ones
they glued cut down the back plate and glued the pads onto the original ones to fit


Shocking! Did they own up to it?
____________________
Current bike: Honda CBR 1100xx
 Back to top
View user's profile Send private message You must be logged in to rate posts

janner_10
World Chat Champion



Joined: 26 Sep 2011
Karma :

PostPosted: 05:35 - 03 Mar 2014    Post subject: Reply with quote

Taken worse off to be fair. They don't look a critical.
____________________
Yamaha FZS600 (Now gone to heaven) > CBR600F4i (SOLD) > '99 YZF-R1
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Alienfish360
Derestricted Danger



Joined: 02 Mar 2014
Karma :

PostPosted: 09:02 - 03 Mar 2014    Post subject: Reply with quote

Rode with far worse.

I rely on the built in wear indicator, makes a metal on metal noise
 Back to top
View user's profile Send private message You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 11:05 - 03 Mar 2014    Post subject: Reply with quote

Those pads are fine. When they get down to around 1.5mm it's time to change them. If the brakes aren't responsive enough perhaps it's time to clean the calipers and pistons and bleed the system. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 12:24 - 03 Mar 2014    Post subject: Reply with quote

Vincent wrote:
Unless you want to remove the pistons, don't pull the brake lever while the pads are removed or the caliper is off the bike.


How do you clean your brake pistons then?
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.
Old Thread Alert!

The last post was made 12 years, 262 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.06 Sec - Server Load: 0.97 - MySQL Queries: 13 - Page Size: 127.97 Kb