Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


turn signal help /indicators PLEASE HELP ME

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

jason3249
Nitrous Nuisance



Joined: 14 Aug 2011
Karma :

PostPosted: 18:45 - 01 Mar 2014    Post subject: turn signal help /indicators PLEASE HELP ME Reply with quote

Hi all as some of you no iv just finished my project

But I wont to fit indicators to it

Does any one no a quick way or some think

Or does any one no a video

Easiest way possible as abit dum

Wink


    Last edited by jason3249 on 12:30 - 02 Mar 2014; edited 1 time in total
     Back to top
    View user's profile Send private message You must be logged in to rate posts

    clancy
    World Chat Champion



    Joined: 11 Apr 2009
    Karma :

    PostPosted: 19:39 - 01 Mar 2014    Post subject: Reply with quote

    Fit indicators to what ? I don't know what project you've done
    ____________________
    KLX 300r
     Back to top
    View user's profile Send private message Send e-mail You must be logged in to rate posts

    jason3249
    Nitrous Nuisance



    Joined: 14 Aug 2011
    Karma :

    PostPosted: 20:44 - 01 Mar 2014    Post subject: Reply with quote

    Sorry mate

    Its a custom job but it still runs of the standard gilera sp 125/180 wiring loom

    Its a gilera runner sp 125/180 well was

    If its possible wont it to run of a seperate circuit

    Just of the battery if thats possible


    https://i1289.photobucket.com/albums/b512/tomgreen1985/Mobile%20Uploads/IMG_20140228_110424_zpsy0bb7ifm.jpg
     Back to top
    View user's profile Send private message You must be logged in to rate posts

    jason3249
    Nitrous Nuisance



    Joined: 14 Aug 2011
    Karma :

    PostPosted: 12:07 - 02 Mar 2014    Post subject: Reply with quote

    Any one no a easy set up just of the battery and a switch gear


    Smile
     Back to top
    View user's profile Send private message You must be logged in to rate posts

    qarka
    Spanner Monkey



    Joined: 10 Mar 2009
    Karma :

    PostPosted: 17:47 - 02 Mar 2014    Post subject: Reply with quote

    You're gonna need a flasher unit. Check ebay.

    https://www.kevinscycleracing.com/images/plastic/Turn%20Signal%20Wiring%20Diagram.JPG
    ____________________
    Previous - Sinnis Apache - Honda Bros 400 - Yamaha SR500 - Honda Transalp - Kawasaki ZX-7R - Honda CB-1 - Honda 929 Fireblade - Honda NTV650 [b]Current[\b] Honda CB500
     Back to top
    View user's profile Send private message You must be logged in to rate posts

    jason3249
    Nitrous Nuisance



    Joined: 14 Aug 2011
    Karma :

    PostPosted: 00:18 - 03 Mar 2014    Post subject: Reply with quote

    Thanks mate got one some where are copy that Smile
     Back to top
    View user's profile Send private message You must be logged in to rate posts

    Robby
    Dirty Old Man



    Joined: 16 May 2002
    Karma :

    PostPosted: 08:16 - 03 Mar 2014    Post subject: Reply with quote

    If you can find some bar-end indicators they would look quite good.

    A few things to remember:
    1. If you get LED indicators you need to get an LED relay. The power draw from LEDs is much lower, so if you use a normal relay it will flash too fast.
    2. To simplify the wiring, you don't need to wire all of the earths (negative) back to the battery. Just wire each earth into the frame somewhere, and make sure there is a connection somewhere from the frame to the battery negative. This connection should already exist.
     Back to top
    View user's profile Send private message You must be logged in to rate posts

    jason3249
    Nitrous Nuisance



    Joined: 14 Aug 2011
    Karma :

    PostPosted: 08:47 - 03 Mar 2014    Post subject: Reply with quote

    Hi mate all ready cracked that

    Led relays are dear

    So you just buy a higher watt standard one and it works fine think I was running on my other bike 80 watt standard ticker box and it worked good

    Them led ones are abit of a rip of when you can do it my way


    Are look around for some bar end ones as that sounds good



    Thanks all Smile
     Back to top
    View user's profile Send private message You must be logged in to rate posts

    Islander
    World Chat Champion



    Joined: 05 Aug 2012
    Karma :

    PostPosted: 11:15 - 03 Mar 2014    Post subject: Reply with quote

    jason3249 wrote:
    Hi mate all ready cracked that

    Led relays are dear

    So you just buy a higher watt standard one and it works fine think I was running on my other bike 80 watt standard ticker box and it worked good

    Them led ones are abit of a rip of when you can do it my way


    Are look around for some bar end ones as that sounds good



    Thanks all Smile


    Errrrm, that's about as wrong as wrong can be.

    An electromechanical relay with a higher load rating won't work with the extremely low load that LED indicators present to it - you need to go the other way. Use a higher rated electromechanical relay and it just won't operate at all - it depends on the load to heat a bimetallic strip to make it flash.

    Also, electronic flasher relays (LED relays) are as cheap as chips - I linked one from Amazon for around £3 the other day. In fact this one:

    https://www.amazon.co.uk/Universal-Flasher-Relay-Motorcycle-Signal/dp/B00I3XKYLQ/ref=pd_rhf_dp_p_t_1_KY0P
     Back to top
    View user's profile Send private message You must be logged in to rate posts
    Old Thread Alert!

    The last post was made 12 years, 262 days ago. Instead of replying here, would creating a new thread be more useful?
      Display posts from previous:   
    This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

    Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
    Page 1 of 1

     
    You cannot post new topics in this forum
    You cannot reply to topics in this forum
    You cannot edit your posts in this forum
    You cannot delete your posts in this forum
    You cannot vote in polls in this forum
    You cannot attach files in this forum
    You cannot download files in this forum

    Read the Terms of Use! - Powered by phpBB © phpBB Group
     

    Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.07 Sec - Server Load: 0.48 - MySQL Queries: 13 - Page Size: 58.9 Kb