Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


SV650 Scorpion 54mm link pipe

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

tinychaos42
L Plate Warrior



Joined: 05 May 2012
Karma :

PostPosted: 12:39 - 03 Mar 2014    Post subject: SV650 Scorpion 54mm link pipe Reply with quote

Hi everyone,

got a scorpion slip on can off ebay, title said it has 54mm link pipe diameter, and that's seems to be a correct measurement.

Bought it in January for a relatively cheap price, just got round to fitting it. Obvious issue is that I am missing the link pipe itself, and the SV's stock exhaust pipe is pretty much the same size, so the link pipe is definitely needed. Any ideas where I could find one / get one made?

Searched on ebay for the last day and no dice, there are loads of link pipes for viper cans, but looks like the viper slip-ons have a 50-51mm end.

Thanks for the help
 Back to top
View user's profile Send private message You must be logged in to rate posts

Matt B
World Chat Champion



Joined: 01 May 2012
Karma :

PostPosted: 12:47 - 03 Mar 2014    Post subject: Reply with quote

Why don't you email Scorpion and see what they say?

[email protected]
____________________
stinkwheel: He had an animated .gif of a cat performing fellatio. It's not socially acceptable. It can have real life adverse effects on other people.
 Back to top
View user's profile Send private message You must be logged in to rate posts

tinychaos42
L Plate Warrior



Joined: 05 May 2012
Karma :

PostPosted: 12:49 - 03 Mar 2014    Post subject: Reply with quote

thanks for the email, will try to do so
 Back to top
View user's profile Send private message You must be logged in to rate posts

tinychaos42
L Plate Warrior



Joined: 05 May 2012
Karma :

PostPosted: 16:39 - 03 Mar 2014    Post subject: Reply with quote

So turns out scorpion is not selling link pipes separately
 Back to top
View user's profile Send private message You must be logged in to rate posts

UnknownStuntm...
World Chat Champion



Joined: 13 Sep 2007
Karma :

PostPosted: 17:15 - 03 Mar 2014    Post subject: Reply with quote

do you need a link pipe? If it's the standard system on the SV, there's a blob welded on the exhaust to indicate where to chop it off... And 'pretty much' is not quite accurate enough to rule out a small chop under the pipe and doing the bugger up tight?
 Back to top
View user's profile Send private message You must be logged in to rate posts

tinychaos42
L Plate Warrior



Joined: 05 May 2012
Karma :

PostPosted: 17:23 - 03 Mar 2014    Post subject: Reply with quote

So basically the diameter of the exhaust outlet is 54mm, the pipe coming out of the exhaust is about 5cm straight alu pipe.

https://i.ebayimg.com/t/Carbon-Fiber-Scorpion-Motorcycle-Exhaust-54mm-Link-Pipe-Diameter-SV650-Bandit-/00/s/NjAwWDgwMA==/z/Gm0AAOxy4dNS0IX7/$_12.JPG

the outer diameter of the pipe coming from the engine is also 54mm. The main issue is that on the current stock exhaust setup, the pipe starts to make a slight bend about 2cm after the exhaust can ends. So fitting the two together would involve some nasty work..
 Back to top
View user's profile Send private message You must be logged in to rate posts

NooBish-AbbZ
Nova Slayer



Joined: 03 Jan 2014
Karma :

PostPosted: 09:31 - 04 Mar 2014    Post subject: Reply with quote

i've looked at getting an end can for my SV, and all i've read fitting for involves hack-sawing the OEM system and silicon-ing the end can on to it
____________________
SV650S - Feb '14-March '19
XJ6N- Apr '19 -Present
 Back to top
View user's profile Send private message You must be logged in to rate posts

tinychaos42
L Plate Warrior



Joined: 05 May 2012
Karma :

PostPosted: 09:38 - 04 Mar 2014    Post subject: Reply with quote

This is what I got from the seller:

"The item included the exhaust, the bracket and the link pipe.
The link pipe is show in the attached photo. The link pipe is a single metal collar with two clamps at either end.
Step 1: Use a hack saw or angle grinder to cut the original SV650 exhaust
Step 2: slip the scorpion exhaust (with link pipe attached) over the cut pipe
Step 3: do up clamps"

Don't quite get how he managed to do step 2, as the diameters are almost the exact same (external diameter 1mm bigger on the SV end.
 Back to top
View user's profile Send private message You must be logged in to rate posts

clancy
World Chat Champion



Joined: 11 Apr 2009
Karma :

PostPosted: 10:58 - 04 Mar 2014    Post subject: Reply with quote

Try heating up the link pipe before sliding it on, might work
____________________
KLX 300r
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

UnknownStuntm...
World Chat Champion



Joined: 13 Sep 2007
Karma :

PostPosted: 11:20 - 04 Mar 2014    Post subject: Reply with quote

First, have you got the stock exhaust on the bike? The standard system is one piece, and you need to hacksaw the end can off to fit an aftermarket end can. That's where the blob helps you pick your spot to cut. If you've got an aftermarket can on it already, someone has already done the hardest part.

This pic shows a clamp with 2 bolts, (it's a bit of a stretch to call that a link pipe, but whatever!) I reckon it's sturdy enough to open out and slide over another pipe if it's the same diameter 'closed'.

https://i.ebayimg.com/t/Carbon-Fiber-Scorpion-Motorcycle-Exhaust-54mm-Link-Pipe-Diameter-SV650-Bandit-/00/s/NjAwWDgwMA==/z/Gm0AAOxy4dNS0IX7/$_12.JPG
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 261 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.05 Sec - Server Load: 0.44 - MySQL Queries: 13 - Page Size: 62.64 Kb