Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Need Help Adjusting Chain on CB500 (Noob problems)

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Icon
Borekit Bruiser



Joined: 21 Dec 2013
Karma :

PostPosted: 19:21 - 04 Mar 2014    Post subject: Need Help Adjusting Chain on CB500 (Noob problems) Reply with quote

Hey Guys,
I was trying to adjust the chain today on my 2001 CB500 for the first time as it was a bit loose. It's my first bike.

I put the bike on the centrestand and put it into neutral. I loosed the 2 lugnuts and the axle nut.

I then tried to to move the adjuster nuts with a 14 spanner. The nuts moved along the adjuster but I didn't see any change in the adjustment markings. It just left a space between the adjustmen nuts and the end of the swingarm

I somehow ended up overtightening the chain and have had to loosen the axle nut to untighten it.

What am I doing wrong? Sad
 Back to top
View user's profile Send private message You must be logged in to rate posts

Saltire
Could Be A Chat Bot



Joined: 11 Apr 2013
Karma :

PostPosted: 19:24 - 04 Mar 2014    Post subject: Reply with quote

Not much more knowledgable than yourself but make sure you get the 'sweet spot' before adjusting.

Spin your back wheel and check the chain tension, you'll find a spot that is tighter than the rest, that is the bit you take measurements from. Tightening the chain at one of it's slackest points wont be pretty when you sit on the bike (which also tightens it a bit) and give it some power.
 Back to top
View user's profile Send private message You must be logged in to rate posts

flumpy7
Could Be A Chat Bot



Joined: 31 May 2008
Karma :

PostPosted: 21:31 - 04 Mar 2014    Post subject: Reply with quote

Effectively what you are doing when you adjust the chain is moving the rear wheel backwards or forwards. Therefore, you may need to give the wheel a kick forward or pull it back manually a bit to complete the adjustment. The adjustment plates may only move position once you tighten the axle nut. What you may have done is kept tightening the chain because you couldn't see movement along the markings but then when you went to tighten the axle nut the adjuster plates moved into the new position. Tightening the axle nut tensions the chain a little further and this is probably how you ended up going too far. You need to slacken the adjusters off a bit each side, remember only a eight of a turn at a time until you have the desired slack measured by movement of the chain up and down at the centre point between the sprockets. I always leave a small amount of extra slack to account for doing up the axle nut.

Wheel alignment is best not done by the markings. They are notoriously unreliable. Google the string or plank of wood method, or, if you're lazy like me, count the threads on the ends of the adjusters to make sure they are the same each side. Once you have the alignment about right, future adjustments will be easier as you will just need to make sure you turn the adjusters the exact same amount each side. If you are doing this at regular intervals it will only mean a tiny adjustment each time which makes it easier to keep both sides the same.

Hope this helps
____________________
2012 Sinnis apache
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 260 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.07 Sec - Server Load: 0.38 - MySQL Queries: 15 - Page Size: 36.89 Kb