Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Gate Locks

Reply to topic
Bike Chat Forums Index -> Dear Auntie BCF...
View previous topic : View next topic  
Author Message

Doomsnite
Traffic Copper



Joined: 19 Nov 2013
Karma :

PostPosted: 11:44 - 18 Mar 2014    Post subject: Gate Locks Reply with quote

Putting a new wider gate in the garden for my bike and want to now have a lock put on which I can lock from the outside using a key when I go out on it. Any suggestions that would be weather proof?

Would rather not re-use an internal padlock on the outside but have heard that mortice locks and the like can rust in the weather.
____________________
Triumph Street Triple-R
Sold: Honda Hornet CB600F-Y / Yamaha YBR125
 Back to top
View user's profile Send private message You must be logged in to rate posts

delsol
World Chat Champion



Joined: 12 Apr 2011
Karma :

PostPosted: 21:45 - 18 Mar 2014    Post subject: Re: Gate Locks Reply with quote

Doomsnite wrote:
Putting a new wider gate in the garden for my bike and want to now have a lock put on which I can lock from the outside using a key when I go out on it. Any suggestions that would be weather proof?

Would rather not re-use an internal padlock on the outside but have heard that mortice locks and the like can rust in the weather.


Low tech, low cost, open up the mortice lock casing and smother it in this https://www.toolstation.com/shop/White+Grease/p10203

Higher tech, open lock as above and ACF50 it, even less cost (if you already have some ACF50).
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Tamsin
World Chat Champion



Joined: 07 Mar 2014
Karma :

PostPosted: 21:58 - 18 Mar 2014    Post subject: Reply with quote

Just a quick point, no point in locking the gate if its a lift pin one...
 Back to top
View user's profile Send private message You must be logged in to rate posts

Doomsnite
Traffic Copper



Joined: 19 Nov 2013
Karma :

PostPosted: 22:07 - 18 Mar 2014    Post subject: Reply with quote

A latch? No its a new gate and not putting a latch on. Goin for a custom wide gate to go with my new concrete anchor 😃
____________________
Triumph Street Triple-R
Sold: Honda Hornet CB600F-Y / Yamaha YBR125
 Back to top
View user's profile Send private message You must be logged in to rate posts

James83
Crazy Courier



Joined: 10 Apr 2013
Karma :

PostPosted: 22:10 - 18 Mar 2014    Post subject: Reply with quote

He means the hinge - common design for gate hinges is a hinge that simply slots over a barrel. Problem with that is, there nothing to stop someone lifting it off again, making the lock at the other end irrelevant.
____________________
Jonathan A wrote: tart.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Doomsnite
Traffic Copper



Joined: 19 Nov 2013
Karma :

PostPosted: 22:38 - 18 Mar 2014    Post subject: Reply with quote

The one Ive found just moves a bolt across just like a pad bolt. you couldn't lift that gate up if the bolt is across ?
____________________
Triumph Street Triple-R
Sold: Honda Hornet CB600F-Y / Yamaha YBR125
 Back to top
View user's profile Send private message You must be logged in to rate posts

stevo as b4
World Chat Champion



Joined: 17 Jul 2003
Karma :

PostPosted: 00:40 - 19 Mar 2014    Post subject: Reply with quote

I've used a 5lever mortice lock designed for a back door on my Gate. I lube it with WD40 every so often and it's fine. I would also have at least one HD locking bolt on the back of the gate though, and if you want it to be secure, I'd position it lower down on the back of the gate, so you can't put your arm over the top of the gate to reach it if possible?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Screw Loose
Scooby Slapper



Joined: 09 Feb 2012
Karma :

PostPosted: 13:53 - 19 Mar 2014    Post subject: Reply with quote

Never mind lifting the gate up, I've got a friend who went to get their bike out one day to find it missing, and a massive tyre mark going all the way up and over the 6ft fence, somehow the pikey gits had managed to lift the damn thing up and over. No idea how the hell they managed it, but they did Shocked
____________________
MBK Nitro 50cc -> CBF 125 <\s>
CBT: February 2012 - Full licence August 2013
 Back to top
View user's profile Send private message You must be logged in to rate posts

Doomsnite
Traffic Copper



Joined: 19 Nov 2013
Karma :

PostPosted: 14:55 - 19 Mar 2014    Post subject: Reply with quote

Would be easier to just drive right through it
____________________
Triumph Street Triple-R
Sold: Honda Hornet CB600F-Y / Yamaha YBR125
 Back to top
View user's profile Send private message You must be logged in to rate posts

map
Mr Calendar



Joined: 14 Jun 2004
Karma :

PostPosted: 15:40 - 19 Mar 2014    Post subject: Reply with quote

James83 wrote:
He means the hinge - common design for gate hinges is a hinge that simply slots over a barrel. Problem with that is, there nothing to stop someone lifting it off again, making the lock at the other end irrelevant.

Hinge side bolts would stop that.
Like these...
https://www.lowcosting-locksmiths.co.uk/perch/resources/hinge2-.jpgimage from here. Other sellers and cheaper prices available.
____________________
...and the whirlwind is in the thorn trees, it's hard for thee to kick against the pricks...
Gibbs, what did Duckie look like when he was younger? Very Happy
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

berzerker
Renault 5 Driver



Joined: 27 Sep 2013
Karma :

PostPosted: 15:54 - 19 Mar 2014    Post subject: Reply with quote

I've used something similar to this https://www.locksonline.co.uk/acatalog/CISA-42311-50-Gate-Lock.html It has quite a deep 'throw'; the bolt moves back once when unlocked and then a bit further once the handle is pulled.
I finished it off with a nice chrome handle similar to this https://www.doorhandlesdirect.co.uk/20/section.aspx/3159/19mm_round_bar_euro_door_handles_paa
 Back to top
View user's profile Send private message You must be logged in to rate posts

Doomsnite
Traffic Copper



Joined: 19 Nov 2013
Karma :

PostPosted: 16:08 - 19 Mar 2014    Post subject: Reply with quote

I went for this one in the end..

https://www.gatewrights.co.uk/locks.html
____________________
Triumph Street Triple-R
Sold: Honda Hornet CB600F-Y / Yamaha YBR125
 Back to top
View user's profile Send private message You must be logged in to rate posts

cagiva gezzer
World Chat Champion



Joined: 17 Mar 2003
Karma :

PostPosted: 19:17 - 19 Mar 2014    Post subject: Reply with quote

Have one of the above and works fine. Fit with anti tamper screws to prevent it being taken off too easily.
____________________
"because one stroke isnt enough and four strokes waste two"
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 191 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Dear Auntie BCF... All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 1.06 - MySQL Queries: 13 - Page Size: 75.75 Kb