CBR 954 on GSX750 help!

[ninoBFU]

Hi guys

Can you please tell me if these forks would fit on my bike.

Bearing dimensions:
Top
INNER DIAMETER / OUTER DIAMETER / WIDTH

CBR. 26. / 47. / 15

Gsx. 25. / 47. / 15

Bottom
INNER DIAMETER / OUTER DIAMETER / WIDTH

CBR. 30. / 55. / 17

Gsx. 30. / 55. / 17


Thanks in advance
____________________
<a href="https://www.bikechatforums.com/viewtopic.php?p=3879192#3879192/">My GSX 750 1981 Cafe Racer Project build</a>

[hmmmnz]

i think you pretty much answered your own question in regards to the bearing dimensions,

no, if you are using the donor bike yokes/triples and arnt using new bearings,
if you use the cbr sized bearings on the top it should be fine
provided the headstock isn't vastly different, you may need to make up a spacer
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[ninoBFU]

[hmmmnz]

there will be no difference if you use the cbr bearings,
the external dimensions of the bearings (the bit that would be in the head stock) is the same, its the stem at the top that is 1mm different,

get it and make it work,
ive done numerous usd conversions, and that looks like its going to be a pretty straight forward one,

keep us posted and start a build thread in the show and tell
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches