Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


mechanical advice

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

graysam1
L Plate Warrior



Joined: 19 Apr 2014
Karma :

PostPosted: 11:47 - 19 Apr 2014    Post subject: mechanical advice Reply with quote

Hi, I have a yamaha aerox yq100 100cc, it ran like a dream until someone tried to steal it and jabbed a screwdriver in the ignition.

I replaced the ignition and couldnt get it to start, took it to a mechanic who said it was the CDI unit, had new one fitted and still couldnt get it to start, he said it was the variator, new one fitted and still wouldnt start.

Took it to 2nd mechanic who said it was the generator stater plate, new one fitted and still wouldnt start, said it was the starter relay, new one fitted and it still wouldnt start.

Its had new rectifier & regulator, resistor, leads, spark plug, clutch, flasher relay, lever and switches - all genuine yamaha new parts. the mechanic said its sparking but not holding it.

Its my pride and joy, I am now depressed, angry and broke

Any suggestions on what it could be will be appreciated
____________________
sj etheridge
 Back to top
View user's profile Send private message You must be logged in to rate posts

berzerker
Renault 5 Driver



Joined: 27 Sep 2013
Karma :

PostPosted: 13:51 - 19 Apr 2014    Post subject: Reply with quote

Does it have an immobiliser?
Has the wiring been damaged when the ignition was messed with?




Why on earth did your mechanic change the variator? Sad
 Back to top
View user's profile Send private message You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

DrSnoosnoo
World Chat Champion



Joined: 28 Mar 2012
Karma :

PostPosted: 14:53 - 19 Apr 2014    Post subject: Reply with quote

Don't pay the mechanic for saying he'd fix it but then not fix it.
____________________
I'm Sam; Northern, Ginger, Lover
Did have: '95 ZZR600 '83 CG125 '97 ZZR1100 '15 Hypermotard 821 SP Do Have: '10 ZX10R
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

c_dug
Super Spammer



Joined: 04 Sep 2007
Karma :

PostPosted: 14:56 - 19 Apr 2014    Post subject: Reply with quote

Sounds like you've been a bit shafted if you've paid for all those bits and pieces!

Can you work a screwdriver? Can you afford a multimeter?

If the answer to those two questions is yes then you can probably diagnose and fix the issue yourself with a little help.
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

c_dug
Super Spammer



Joined: 04 Sep 2007
Karma :

PostPosted: 14:57 - 19 Apr 2014    Post subject: Reply with quote

Also more info needed on the not starting, does it do anything? Any lights on the dash? Does it crank over but not fire up? Fire up but dies?

More info.
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :

PostPosted: 15:04 - 19 Apr 2014    Post subject: Reply with quote

Huh?
Not a scooter expert but played with and fixed a few
whats puzzling me is
How the hell can a bad variator prevent the thing starting?
the variator is the pulley thing right?
what the hell is that got do with ignition and starting?

sounds fishy to me


just guessing of course but as it was an attempted nick
and theivin bastards often fiddle with wires
a lot of ignition switches have a wire to the cdi to allow
and stop the motor
I'd be checking this first

Also CDIs are usually easy to test, did any of these guys actually test
it or just swap and hope?
Sounds like you need a good (proper) mechanic
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts

graysam1
L Plate Warrior



Joined: 19 Apr 2014
Karma :

PostPosted: 15:15 - 19 Apr 2014    Post subject: Reply with quote

Fortunately the mechanics havent charged me because they havent fixed it and I havent purchased any parts from the mechanics I like to buy genuine from yamaha dealers. the wires were damaged, but have been replaced and checked twice. Its also had a new battery. It doesnt have an immobliser on. Its turning over just not catching. The mechanic said the spark is there
____________________
sj etheridge
 Back to top
View user's profile Send private message You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :

PostPosted: 15:17 - 19 Apr 2014    Post subject: Reply with quote

cant find the 100 diagram but the aerox 50 has a black/white wire
from the ignition switch to the CDI
Hoping/assuming Yamaha use the same colour conventions
this is the stop wire and often held high ( open circuit)
to allow the motor to run
an earthed grounded to stop it
Check this cable with meter

Also, I'm assuming again
when you say 'wont start' I assume you mean its spins over but doesnt fire up?
or do you mean it wont spin over?
thats a very different fault.
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts

graysam1
L Plate Warrior



Joined: 19 Apr 2014
Karma :

PostPosted: 15:43 - 19 Apr 2014    Post subject: Reply with quote

It does turn over just wont fire up, the mechanics have both said they have checked the wiring, the light are working
____________________
sj etheridge
 Back to top
View user's profile Send private message You must be logged in to rate posts

Bunny Lingus
Traffic Copper



Joined: 20 Apr 2014
Karma :

PostPosted: 06:06 - 21 Apr 2014    Post subject: Reply with quote

Connect the black wire to the red wire at the ignition. If it still doesn't start you might have an immobiliser somewhere else on the bike. A mate had a Speedfight two with an identical prob. We never found the immobiliser until we stripped most of the plastic off. Some scooters have a red key (his did), which somehow resets the immobiliser. If you still can't boot it up try connecting all the ignition wires & removing one at a time. You sure you got juice in it? Is there an engine kill switch? Check that isn't corroded.
____________________
Bunny Lingus & The Flipside Faggots
 Back to top
View user's profile Send private message You must be logged in to rate posts

graysam1
L Plate Warrior



Joined: 19 Apr 2014
Karma :

PostPosted: 14:27 - 21 Apr 2014    Post subject: Reply with quote

Thanks will give that a go and let you know how I get on.

Had an auto electrician come and test all the wiring he said everything was ok but he didnt know why it wasnt working
____________________
sj etheridge
 Back to top
View user's profile Send private message You must be logged in to rate posts

smegballs
World Chat Champion



Joined: 28 Oct 2007
Karma :

PostPosted: 14:33 - 21 Apr 2014    Post subject: Reply with quote

Okay first off.

Here's the service manual for your bike.

https://zsebog.com/wp-content/uploads/yamaha-yq100-2000-en.pdf

So now you have access to the wiring diagrams at least. I'll take a quick look and see what kind of ignition system you have.

Ignition wiring diagram is on page 194. From the looks of things, its a self-generating cdi system, as I'd expect on small bikes like this. Just follow the diagnosis chart that is after the ignition wiring diagram. Get yourself a multimeter too. You can get one for a tenner or so, which will do all the auto-electrical jobs. Continuity buzzer is very useful, so I recommend making sure it has that feature.

https://www.rapidonline.com/Test-Measurement/Rapid-318A-Digital-Multimeter-519309

This is my one, I'm well pleased with it. Does all my auto-electrics as well as my electronics hobby projects.


Last edited by smegballs on 14:40 - 21 Apr 2014; edited 1 time in total
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

evoboy
World Chat Champion



Joined: 20 Aug 2009
Karma :

PostPosted: 14:38 - 21 Apr 2014    Post subject: Reply with quote

If its got spark then it should start.

Is it getting fuel?

If you buy bits from a Yamaha dealer then no wonder your skint.
____________________
Suzuki GT250 x7------- Fazer 600------CB250RS------Aprilia Rally 70----- Bandit 600

APT Motorcycles
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 14:54 - 21 Apr 2014    Post subject: Reply with quote

Bunny Lingus wrote:
Connect the black wire to the red wire at the ignition.


DON'T do this. You'll be pouring 12V into a wire that is supposed to be connected to ground.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

smegballs
World Chat Champion



Joined: 28 Oct 2007
Karma :

PostPosted: 16:01 - 21 Apr 2014    Post subject: Reply with quote

https://i.imgur.com/Zv1ULJr.png

Okay OP, I've highlighted the ignition system in red.

If it ran fine until someone tried to do the ignition barrel, my guess is that that BW wire isn't being grounded properly/intermittently connection.

As you can see its a very simple system with not a lot of connections. The key just earth a cdi wire to start/stop the sparks.

It's a shame you have bought loads of parts that are totally unneeded for the ignition system like R/R, flasher relay etc.

This is what I would do if I was working on it.

1. Get a length of wire and make a direct ground for the BW wire on the cdi, to rule out a dodgy ignition barrel. If everything was a go

2. Check resistances of HT coil, as per manual I linked.

3. Check CDI source coil. One of these will the (BR) Black and Red wire going into the CDI. I don't know model specific whether it is referenced to ground or not, so I'd first check between ground and BR: you should see about 200-300V AC with the engine spinning over. You may have to test between BR and GW (green and white) though, should see the same voltage. Test against BR and ground first though.

That should give you a good indication of what is going on.

WR and WL will be the cdi pick-up coil wires, testing between these and spinning the engine will give a low pulse of AC. This is a pulse and not a constant generator (like the cdi source coil) though so you probably won't pick it up on a multimeter, you'd see it on an oscilloscope though.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 213 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.08 Sec - Server Load: 1.22 - MySQL Queries: 13 - Page Size: 90.39 Kb