Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


fork swap ground clearance problem pls help

Reply to topic
Bike Chat Forums Index -> The Workshop Goto page 1, 2, 3  Next
View previous topic : View next topic  
Author Message

ninoBFU
Two Stroke Sniffer



Joined: 24 Dec 2013
Karma :

PostPosted: 12:11 - 21 Apr 2014    Post subject: fork swap ground clearance problem pls help Reply with quote

hi guys just installed a new set of forks on my bike and they are 5inch shorter than the original non usd forks which leaves me with 2.5inch ground clearance......not good.

what would be the easiest way to extend the forks with 3-4inches?

Someone suggested to get round blocks machined to screw on to the top of the fork leg after setting the forks and move the triple tree up.

is that the easiest and cheapest option available

thanks in advance

https://i202.photobucket.com/albums/aa161/nino__/Mobile%20Uploads/A8CDA9D6-2F02-4FB7-B775-FCC95974DDA3_zpsrkvs7yeu.jpg

https://i202.photobucket.com/albums/aa161/nino__/Mobile%20Uploads/A569875A-F47E-420E-A4E1-20792F942D8A_zpshn2kmkbq.jpg
____________________
<a href="https://www.bikechatforums.com/viewtopic.php?p=3879192#3879192/">My GSX 750 1981 Cafe Racer Project build</a>
 Back to top
View user's profile Send private message You must be logged in to rate posts

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 12:17 - 21 Apr 2014    Post subject: Reply with quote

I'd move the exhaust to a scrambler type, or sell the forks and get longer ones
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

CaNsA
Super Spammer



Joined: 02 Jan 2008
Karma :

PostPosted: 12:19 - 21 Apr 2014    Post subject: Reply with quote

SQL wrote:
I'd move the exhaust to a scrambler type, or sell the forks and get longer ones


I was just thinking the same thing.
 Back to top
View user's profile Send private message You must be logged in to rate posts

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 12:21 - 21 Apr 2014    Post subject: Reply with quote

Something like this but less shit looking

https://www.motorrad-news.com/wp-content/uploads/2007/11/derbi-mulhacen-659-nieto.jpg


Last edited by SQL on 12:46 - 21 Apr 2014; edited 1 time in total
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

CaNsA
Super Spammer



Joined: 02 Jan 2008
Karma :

PostPosted: 12:29 - 21 Apr 2014    Post subject: Reply with quote

SQL wrote:
Something like this but less shit looking

https://www.picsauto.com/images/derbi-mulhacen-659-01.jpg


I doubt it can be any less shit than a failed post.
 Back to top
View user's profile Send private message You must be logged in to rate posts

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 12:31 - 21 Apr 2014    Post subject: Reply with quote

No failed post here Laughing

Shows up on my screen

https://www.picsauto.com/images/derbi-mulhacen-659-01.jpg

Edit

https://www.motorrad-news.com/wp-content/uploads/2007/11/derbi-mulhacen-659-nieto.jpg


Last edited by SQL on 12:47 - 21 Apr 2014; edited 1 time in total
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 12:38 - 21 Apr 2014    Post subject: Reply with quote

There isn't an easy way. There are several hard and bad ways, most of which will not work (including your extended top cap idea) on account of there being a taper just above the bottom yoke clamp.

I'd put those forks on ebay and get in touch with the oldskool suzuki guys to find out what will fit properly.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

SQL
World Chat Champion



Joined: 08 Aug 2012
Karma :

PostPosted: 12:46 - 21 Apr 2014    Post subject: Reply with quote

CaNsA wrote:
SQL wrote:


I doubt it can be any less shit than a failed post.


Strange now its gone

ill reedit
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 19:26 - 21 Apr 2014    Post subject: Reply with quote

The easiest way for you to sort this would be to phone ABE on 0208 858 9052 and ask them to make you a set of stanchions that are 4inches longer, fit them and fit a 4inch spring spacer.
 Back to top
View user's profile Send private message You must be logged in to rate posts

hmmmnz
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 20:30 - 21 Apr 2014    Post subject: Reply with quote

custom made yokes, different forks
or new sanctions https://www.allbikeengineering.co.uk/forks.php
are really good as sick pup mentioned,
that would probably be the best option, they can do all the work
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 20:42 - 21 Apr 2014    Post subject: Reply with quote

I still bet you'll get something from another model off ebay that'll bolt straight in for the same price as you could sell the bits you have.

I know a few guys racing in post-modern classics and those air-cooled suzukis are, to a greater or lesser extent, pick-n-mix when it comes to parts.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

CaNsA
Super Spammer



Joined: 02 Jan 2008
Karma :

PostPosted: 21:02 - 21 Apr 2014    Post subject: Reply with quote

Are they zxr400 forks?
 Back to top
View user's profile Send private message You must be logged in to rate posts

69chris
Trackday Trickster



Joined: 10 May 2011
Karma :

PostPosted: 21:37 - 21 Apr 2014    Post subject: Reply with quote

a stepped top yoke is the normal cure Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 22:36 - 21 Apr 2014    Post subject: Reply with quote

69chris wrote:
a stepped top yoke is the normal cure Thumbs Up


For a 4inch increase. You're talking rubbish.

The usual way around this is to use GSXR1100 forks as they are relatively tall but as the work is already done just get a pair of longer stanchions.
 Back to top
View user's profile Send private message You must be logged in to rate posts

moonzoomer
World Chat Champion



Joined: 01 Jul 2012
Karma :

PostPosted: 22:51 - 21 Apr 2014    Post subject: Reply with quote

BURN the witch
 Back to top
View user's profile Send private message You must be logged in to rate posts

69chris
Trackday Trickster



Joined: 10 May 2011
Karma :

PostPosted: 06:59 - 22 Apr 2014    Post subject: Reply with quote

sickpup wrote:
69chris wrote:
a stepped top yoke is the normal cure Thumbs Up


For a 4inch increase. You're talking rubbish.

The usual way around this is to use GSXR1100 forks as they are relatively tall but as the work is already done just get a pair of longer stanchions.



whatever you say Laughing

not the same forks or bike but you get the idea.....

https://www.billetbikebits.com/shop/index.php?main_page=product_info&products_id=90

and as the gsx is a fair bit heavier than the doner bike i reckon something like the above along with some up=rated fork springs would do the trick Smile

also iirc fzr1000 ru forks are prob a bit longer than most but as you say the hard works been done now so.........
 Back to top
View user's profile Send private message You must be logged in to rate posts

evoboy
World Chat Champion



Joined: 20 Aug 2009
Karma :

PostPosted: 07:51 - 22 Apr 2014    Post subject: Reply with quote

69chris wrote:



whatever you say Laughing

not the same forks or bike but you get the idea.....

https://www.billetbikebits.com/shop/index.php?main_page=product_info&products_id=90

and as the gsx is a fair bit heavier than the doner bike i reckon something like the above along with some up=rated fork springs would do the trick Smile

also iirc fzr1000 ru forks are prob a bit longer than most but as you say the hard works been done now so.........


This is what my ZRX uses to overcome the shorter USD's.

Gives the same front ride height as the stock forks.
____________________
Suzuki GT250 x7------- Fazer 600------CB250RS------Aprilia Rally 70----- Bandit 600

APT Motorcycles
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 09:28 - 22 Apr 2014    Post subject: Reply with quote

69chris wrote:
[whatever you say Laughing

not the same forks or bike but you get the idea.....

https://www.billetbikebits.com/shop/index.php?main_page=product_info&products_id=90

and as the gsx is a fair bit heavier than the doner bike i reckon something like the above along with some up=rated fork springs would do the trick Smile

also iirc fzr1000 ru forks are prob a bit longer than most but as you say the hard works been done now so.........


The bit you seem to have missed is 3-4inches. Those yokes are suitable for about a 2 inch difference. Most head tubes are less than 8inches so to use a stepped yoke for 4inches...
 Back to top
View user's profile Send private message You must be logged in to rate posts

ninoBFU
Two Stroke Sniffer



Joined: 24 Dec 2013
Karma :

PostPosted: 23:44 - 22 Apr 2014    Post subject: Reply with quote

CaNsA wrote:
Are they zxr400 forks?


CBR 954 fireblade 2003 front end
____________________
<a href="https://www.bikechatforums.com/viewtopic.php?p=3879192#3879192/">My GSX 750 1981 Cafe Racer Project build</a>
 Back to top
View user's profile Send private message You must be logged in to rate posts

ninoBFU
Two Stroke Sniffer



Joined: 24 Dec 2013
Karma :

PostPosted: 23:45 - 22 Apr 2014    Post subject: Reply with quote

sickpup wrote:
The easiest way for you to sort this would be to phone ABE on 0208 858 9052 and ask them to make you a set of stanchions that are 4inches longer, fit them and fit a 4inch spring spacer.


Thanks mate for the contact numer .. I'll ring him and hope for the best ....no point selling and buying new ones I thinks and this pair is a good one light big breaks
____________________
<a href="https://www.bikechatforums.com/viewtopic.php?p=3879192#3879192/">My GSX 750 1981 Cafe Racer Project build</a>
 Back to top
View user's profile Send private message You must be logged in to rate posts

lihp
World Chat Champion



Joined: 22 Sep 2010
Karma :

PostPosted: 23:46 - 22 Apr 2014    Post subject: Reply with quote

Because of that taper you would also need to taper the bottom yoke.

If you had clip-ons you would have them 4inches below the top of steering stem, going to near impossible to get a usable lock to lock on the road, without anything fouling.
 Back to top
View user's profile Send private message You must be logged in to rate posts

ninoBFU
Two Stroke Sniffer



Joined: 24 Dec 2013
Karma :

PostPosted: 23:48 - 22 Apr 2014    Post subject: Reply with quote

Thanks very much to all of you for the help...very much appreciated

Hope everything goes well with the longer stanchions ... I'll keep u posted
____________________
<a href="https://www.bikechatforums.com/viewtopic.php?p=3879192#3879192/">My GSX 750 1981 Cafe Racer Project build</a>
 Back to top
View user's profile Send private message You must be logged in to rate posts

ninoBFU
Two Stroke Sniffer



Joined: 24 Dec 2013
Karma :

PostPosted: 23:53 - 22 Apr 2014    Post subject: Reply with quote

https://i202.photobucket.com/albums/aa161/nino__/Mobile%20Uploads/7ED33AC2-60EF-4553-95E3-E14F102DD40E_zpsht1lgvfl.jpg
____________________
<a href="https://www.bikechatforums.com/viewtopic.php?p=3879192#3879192/">My GSX 750 1981 Cafe Racer Project build</a>
 Back to top
View user's profile Send private message You must be logged in to rate posts

c_dug
Super Spammer



Joined: 04 Sep 2007
Karma :

PostPosted: 07:18 - 23 Apr 2014    Post subject: Reply with quote

I have sod all experience with this sort of thing, but the stance looks really cool, I'd rather change the exhausts than have longer forks.

I presume re-routing the exhaust is just as doable.
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

hmmmnz
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 07:26 - 23 Apr 2014    Post subject: Reply with quote

i must admit, the rake angle looks pretty good like that,
it must have pretty lazy steering with the longer front end,
you might be forced to put a turbo on it and run the exhaust off to the side Wink
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 211 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Goto page 1, 2, 3  Next
Page 1 of 3

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.08 Sec - Server Load: 0.73 - MySQL Queries: 13 - Page Size: 130.53 Kb