Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Brake pads too thick?

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Dave M
Scooby Slapper



Joined: 03 May 2013
Karma :

PostPosted: 16:44 - 24 Apr 2014    Post subject: Brake pads too thick? Reply with quote

Evening All,

Just tried to put in new pads. Tried a brand called Kyoto (I know). A few people have recommended them. Problem is they were binding really bad. I gave pistons a good clean and they move easily in and out so I think they are ok. What I've noticed is when I put the caliper back on one of the bracket bolt tips is touching off all of the disc bolts as the wheel spins. I took the bracket off to gain better access to clean the pistons. In the end I just put the old pads back in. Everything is clean and greased up as it should be. What can I do now with these pads? Could I sand fook out of them to take some of the material off? Could it take a long time? Bike is a Hyosung gt125 comet 2010.
 Back to top
View user's profile Send private message You must be logged in to rate posts

RhynoCZ
Super Spammer



Joined: 09 Mar 2012
Karma :

PostPosted: 16:58 - 24 Apr 2014    Post subject: Reply with quote

Open the fluid reservoar and reduce the amount of brake fluid in there. Then push the pots back into the caliper as far as you can. If that won't work, then you've got a problem. Thumbs Up
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dave M
Scooby Slapper



Joined: 03 May 2013
Karma :

PostPosted: 17:01 - 24 Apr 2014    Post subject: Reply with quote

Yeah I tried that. What problems could I be looking at 😕. Cheers.
 Back to top
View user's profile Send private message You must be logged in to rate posts

RhynoCZ
Super Spammer



Joined: 09 Mar 2012
Karma :

PostPosted: 17:03 - 24 Apr 2014    Post subject: Reply with quote

That is odd, are you sure you pushed the pots completely in? Thinking

Also, is the brake disc up to specs/OEM?

EDIT: Post some pics. Thumbs Up
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor
 Back to top
View user's profile Send private message You must be logged in to rate posts
Beehive Bedlam This post is not being displayed because the poster has bad karma. Unhide this post / all posts.

Dave M
Scooby Slapper



Joined: 03 May 2013
Karma :

PostPosted: 17:22 - 24 Apr 2014    Post subject: Reply with quote

That was the same with my bracket. Tried to compress it but couldn't. It only compresses in and out on one pin. It's fine with old pads in but they are very low now. Slider pin is greased up and moves ok. Should the other slider pin move or should that be stuck into the caliper body? I have never come across this problem before. Pistons were all the way in. Don't know how to post pics? Rear brakes were binding badly as well.
 Back to top
View user's profile Send private message You must be logged in to rate posts

andys675
World Chat Champion



Joined: 08 Feb 2007
Karma :

PostPosted: 17:24 - 24 Apr 2014    Post subject: Reply with quote

some pads do come in different thickness's for different bikes, if you've ever seen EBC part numbers you'll have seen some pads with /3 after them, like FA69/3 which means the pad is thicker, so might have to 'adjust' them
____________________
Some people feel the rain, others just get wet.
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 17:37 - 24 Apr 2014    Post subject: Reply with quote

What is the FA part No. of the pads.

Various pads come in different thicknesses.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Dave M
Scooby Slapper



Joined: 03 May 2013
Karma :

PostPosted: 17:45 - 24 Apr 2014    Post subject: Reply with quote

So should I start sanding ☺
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 210 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.05 Sec - Server Load: 0.29 - MySQL Queries: 13 - Page Size: 58.13 Kb