Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Left handlebar is dodgy

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

notbike
World Chat Champion



Joined: 02 Apr 2014
Karma :

PostPosted: 15:40 - 24 Apr 2014    Post subject: Left handlebar is dodgy Reply with quote

This is kind of a simple thing, but I've never done any kinda mechanics at all so bare with me. Embarassed

Was setting off today for uni, and realized my left handlebar felt really weird, looked down, and it was actually bent inwards towards the tank cause the bolt isn't there... Well, the bolt head isn't there - The actual screw is lodged into the thread so its like completely stuck in there. This allows the handlebar to move around pretty much.

With a little force I pushed the handlebar back to it's normal position and it stays there and didn't cause problems today but I'm worried it could suddenly come loose mid ride. That would suck, my steering would be totally screwed.

It's a YZF R125, second hand, it's been dropped by previous owner (it seems to run fine) but the bolt on that handlebar is one thing I missed.

Also I got MOT coming up like this week, would it fail..?

How do I get this screw out, and where can I get replacement screws? Can a garage do it for me lol?

This pic shows the thing that the screw for the handlebar is stuck in:

https://i.ebayimg.com/t/Yamaha-YZF-R125-top-yoke-upper-fork-Ignition-clamp-2008-2009-2010-2011-2012-/00/s/MTE5OFgxNjAw/z/JGEAAMXQVs1Rm91U/$T2eC16RHJGsFFMmSm84tBRm91TtS2Q~~60_35.JPG

I hope I ain't gotta buy a new one of those ^ or something Thumbs Down
 Back to top
View user's profile Send private message You must be logged in to rate posts

CaNsA
Super Spammer



Joined: 02 Jan 2008
Karma :

PostPosted: 15:41 - 24 Apr 2014    Post subject: Reply with quote

Take the bar off and look to see if there is any of the screw to grab hold of with some mole grips.
 Back to top
View user's profile Send private message You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 15:48 - 24 Apr 2014    Post subject: Reply with quote

Regardless of whether it is an MoT failure it needs to be fixed. It should be fairly easy an independent garage would probably charge £30-50 to fix it.

Mole grips will be no use. If the clip on (not handlebar Wink ) can rotate around the fork, there won't be enough thread to grip. You should be able to get the thread out by knocking a slot into the thread with a chisel or just tapping it round if you can get some purchase with a screw driver.

Where are you based I'm sure a local BCF'er can help if you are having trouble.

edit:- You look local to me, I could probably fix that in less than an hour and have plenty of spare bolts that should fit. I'm in RM12.
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

notbike
World Chat Champion



Joined: 02 Apr 2014
Karma :

PostPosted: 15:53 - 24 Apr 2014    Post subject: Reply with quote

Ahh cheers guys, yeah I can't take off the bars now but likely will give it a go after work. yeah it's bugging me now D: I think the bolt is stuck in there like rusted in and what not. I'm based in hendon/london if anyone wants to have a go at some point haha.

If I somehow screw it up tonight I'll probably take it to a garage but I can't justify paying £30-50 for that!

Edit: thats NW4
 Back to top
View user's profile Send private message You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 15:56 - 24 Apr 2014    Post subject: Reply with quote

Meef wrote:
Ahh cheers guys, yeah I can't take off the bars now but likely will give it a go after work. yeah it's bugging me now D: I think the bolt is stuck in there like rusted in and what not. I'm based in hendon/london if anyone wants to have a go at some point haha.

If I somehow screw it up tonight I'll probably take it to a garage but I can't justify paying £30-50 for that!


It really should be easy and bolts are pennies.

It shouldn't be stuck and should turn easy I'd did a flat head screw driver on one side and tap it round with light blows from a hammer.

Good Luck Thumbs Up
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

notbike
World Chat Champion



Joined: 02 Apr 2014
Karma :

PostPosted: 15:59 - 24 Apr 2014    Post subject: Reply with quote

okie doke haha I'll give it a go then, thanks mate, I'll start looking for bolts for it too then Razz
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 17:47 - 24 Apr 2014    Post subject: Re: Left handlebar is dodgy Reply with quote

Meef wrote:
Also I got MOT coming up like this week, would it fail..?


Of course it will fail, it's dangerous to ride.
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 18:24 - 24 Apr 2014    Post subject: Reply with quote

Looking at pictures of an R0.125 handlebar setup, they are standard clip-ons with an additional lug. That bolt is presumably there as an additional point to prevent the bar rotating on the fork but ought to be pretty much redundant if the clamp is done up properly.

It would still probably fail an MOT if the head is sheared off but the clamp ought to be doing the majority of the task of holding the handlebar onto the fork leg.

I'd go so far as to say, the clamp being loose is probably why that bolt sheared in the first place. Tighten your clamp.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

notbike
World Chat Champion



Joined: 02 Apr 2014
Karma :

PostPosted: 16:07 - 25 Apr 2014    Post subject: Reply with quote

Ahh so today I had some free time and managed to fix it. In the end I used a screw driver and tapped it and the bolt started coming out. Thank fck I wont fail an MoT due to something silly like this Very Happy

Ty for your suggestions and help Thumbs Up

bolt was stuck in that hole in pic 3 only took 10 minutes after all Rolling Eyes

https://i.imgur.com/yN5BRl4.png
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 23:36 - 25 Apr 2014    Post subject: Reply with quote

Something looks horribly wrong with that handlebar clamp. Anyone else?

The pinch of the clamp has bottomed out (red arrow). Suggesting either the clamp itself has become stretched/fractured or the top of the fork stanchion is deforming.

Possibly both?

Red circle: Defect, could be a casting mark but check for cracks in the metal.
Blue circle: This looks ovalled to me.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

notbike
World Chat Champion



Joined: 02 Apr 2014
Karma :

PostPosted: 00:18 - 26 Apr 2014    Post subject: Reply with quote

Reckon I should get a new one? You got me worried now lol I didn't even notice anything at all D: inexperienced eyes I guess. Could this screw the handling of the bike or something? Or indicate a bigger problem?
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 00:33 - 26 Apr 2014    Post subject: Reply with quote

Meef wrote:
Reckon I should get a new one? You got me worried now lol I didn't even notice anything at all D: inexperienced eyes I guess. Could this screw the handling of the bike or something? Or indicate a bigger problem?


Could be an optical illusion, always the trouble with photos of bike parts. How does it compare to the one on the other side? Especially with regard to the gap in the clamp shown by the red arrow?

The screw you replaced ought to be redundant, you shouldn't be able to move the handlebar once it's clamped up tight even without that screw in.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

notbike
World Chat Champion



Joined: 02 Apr 2014
Karma :

PostPosted: 10:46 - 26 Apr 2014    Post subject: Reply with quote

Ah I see, I mean it's slightly tighter than the other handlebar. It seems to be pinched together a fair bit more where you show the red arrow in the pic. But there doesn't seem to be anything wrong with the red circle, and that black thing wasn't pushed all the way in when I took the pic, I think. Hmm.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ballpien
Trackday Trickster



Joined: 13 Aug 2013
Karma :

PostPosted: 16:56 - 26 Apr 2014    Post subject: Reply with quote

For comparison, this is what they should look like. Never touched, removed, adjusted or dropped.

https://i58.tinypic.com/vwshus.jpg
https://i61.tinypic.com/4u9s88.jpg
 Back to top
View user's profile Send private message You must be logged in to rate posts

Aff
World Chat Champion



Joined: 05 May 2011
Karma :

PostPosted: 17:00 - 26 Apr 2014    Post subject: Reply with quote

stinkwheel wrote:
Something looks horribly wrong with that handlebar clamp. Anyone else?

The pinch of the clamp has bottomed out (red arrow). Suggesting either the clamp itself has become stretched/fractured or the top of the fork stanchion is deforming.

Possibly both?

Red circle: Defect, could be a casting mark but check for cracks in the metal.
Blue circle: This looks ovalled to me.


This, something is definitely wrong.
____________________
Current Bikes:Honda 929RR Fireblade, Honda CD200 Benly (Project), Stomp Z2 140
Electric Bike Project
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 208 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.05 Sec - Server Load: 0.45 - MySQL Queries: 13 - Page Size: 89.75 Kb