Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


MOT brake question

Reply to topic
Bike Chat Forums Index -> The Workshop Goto page 1, 2  Next
View previous topic : View next topic  
Author Message

bamt
World Chat Champion



Joined: 14 Dec 2013
Karma :

PostPosted: 17:24 - 23 Apr 2014    Post subject: MOT brake question Reply with quote

I'm coming up to needing an MOT on my Divvy 900 (just over a month left, so time to start checking it out). I know that front brakes binding is a fail (apart from being generally not good anyway). But what is classed as "binding"? My front was starting to bind badly a couple of months ago, I gave everything a good clean up and it is now almost perfect. Spinning the wheel it runs for a good amount of time, however I guess one of the disks isn't quite true as there is a very light rubbing noise of the pads on the disk every rotation (but, as I mentioned, the wheel spins many times before stopping).

So, does it have to be silent running for an MOT pass, or just spinning freely, or is it entirely down to the tester's judgement?
 Back to top
View user's profile Send private message You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :

PostPosted: 17:44 - 23 Apr 2014    Post subject: Reply with quote

I reckon they'd have to be pretty harsh to fail for a light scuffing
between disc and pads.
If a wheel wont spin for more than one revolution because of warped
discs or sticky pistons/pads, that's usually a fail.
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts

gavcarter
Could Be A Chat Bot



Joined: 28 Mar 2009
Karma :

PostPosted: 17:45 - 23 Apr 2014    Post subject: Re: MOT brake question Reply with quote

bamt wrote:
I'm coming up to needing an MOT on my Divvy 900 (just over a month left, so time to start checking it out). I know that front brakes binding is a fail (apart from being generally not good anyway). But what is classed as "binding"? My front was starting to bind badly a couple of months ago, I gave everything a good clean up and it is now almost perfect. Spinning the wheel it runs for a good amount of time, however I guess one of the disks isn't quite true as there is a very light rubbing noise of the pads on the disk every rotation (but, as I mentioned, the wheel spins many times before stopping).

So, does it have to be silent running for an MOT pass, or just spinning freely, or is it entirely down to the tester's judgement?


Ive only hung around for a couple of mots lately and they used a roller with a digital readout to measure how much the brakes where binding by.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bamt
World Chat Champion



Joined: 14 Dec 2013
Karma :

PostPosted: 18:08 - 23 Apr 2014    Post subject: Reply with quote

Thanks. Together with WD Forte's MOT link I feel OK about that now.
 Back to top
View user's profile Send private message You must be logged in to rate posts

moonzoomer
World Chat Champion



Joined: 01 Jul 2012
Karma :

PostPosted: 20:49 - 23 Apr 2014    Post subject: Reply with quote

bamt wrote:
Thanks. Together with WD Forte's MOT link I feel OK about that now.
The brake will fail after the new rules are introduced in GB, the new rules are currently being applied to NI and are a bit of a nightmare as the rider/owner must do the test.
 Back to top
View user's profile Send private message You must be logged in to rate posts

ADSrox0r
World Chat Champion



Joined: 23 Oct 2012
Karma :

PostPosted: 06:11 - 24 Apr 2014    Post subject: Reply with quote

Mine just went through with a mild bind on the front, a slight "Hssssshhh" as you spin. Passed, not even mentioned.
 Back to top
View user's profile Send private message You must be logged in to rate posts

andym
World Chat Champion



Joined: 16 Nov 2010
Karma :

PostPosted: 12:48 - 24 Apr 2014    Post subject: Reply with quote

I took my bike for it's mot last time I was in Glasgow and the guy failed it for the brakes binding and warped discs, after several caliper strips and rebuilds to me they were fine, but every time I took it back the guy just tilted the bike up, spun the front wheel, forced the brake lever back to the handlebars, let it go and spun the wheel again and kept saying they are still binding.

Took it to an MOT station in Bristol and explained the problem it had failed on, so before even doing the MOT the guy took it on the rolling road thing and tested the brakes thoroughly and said there wasn't a problem with them.

So I need to find a new MOT station up here before September as I'm not going back to that guy again
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

janner_10
World Chat Champion



Joined: 26 Sep 2011
Karma :

PostPosted: 20:38 - 24 Apr 2014    Post subject: Reply with quote

Take it in and get it mot'd, they give you a fail list and you have 10 days to sort it out. If in fact it is really a problem.
____________________
Yamaha FZS600 (Now gone to heaven) > CBR600F4i (SOLD) > '99 YZF-R1
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Polarbear
Super Spammer



Joined: 24 Feb 2007
Karma :

PostPosted: 00:35 - 25 Apr 2014    Post subject: Reply with quote

Find an MOT station you are happy with and stick to them.

They should all apply the rules the same but they obviously don't.

Anyone who spins a wheel on a bike with discs should be well aware there will be contact between wheel and pads.
____________________
Victory Cross Country American tractor.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bamt
World Chat Champion



Joined: 14 Dec 2013
Karma :

PostPosted: 05:35 - 25 Apr 2014    Post subject: Reply with quote

That's the thing. Yes, I can take it in and see what fails, but I'd rather not have to make time for two trips to a garage when a bit of tinkering that I'd end up having to do anyway will sort it out. In this case, I'm more than happy with the brake myself (no appreciable difference in pad wear in several thousands of miles, no warming of the disk, and it is only a very slight rub). However, not having put a bike through an MOT before I don't have either a good idea of what is acceptable for the tests hence asking here.

I'm probably just being a little paranoid about this as it is an old-ish (2001) bike. Nor do I have a trusted MOT station (yet). The one I use for cars, who is very good and definitely not inclined to make work, doesn't do bikes.
 Back to top
View user's profile Send private message You must be logged in to rate posts

ws4936
World Chat Champion



Joined: 10 Sep 2009
Karma :

PostPosted: 07:19 - 25 Apr 2014    Post subject: Reply with quote

All stations should be testing fairly, but as mentioned they don't.
The GPZ is notorious for front brake binding, the calipers designed in such a way all the crap gets in there and ceases the pistons when the brake is applied. A swift kick to the caliper will free it. Temporarily
I had a fail for a binding brake, rode it home, rode it there the next day, and kicked the caliper before turning the last corner - tester praised my efforts in addressing his concerns.
It's just one of those things.
____________________
If everything seems under control, you're just not going fast enough.
 Back to top
View user's profile Send private message You must be logged in to rate posts

bodger
Nova Slayer



Joined: 18 Apr 2012
Karma :

PostPosted: 08:00 - 25 Apr 2014    Post subject: Reply with quote

As already mentioned, the test is done on a rolling road and that will sense if the brakes are binding excessively. Also if the disc is warped excessively it would be a fail. You can normally feel the
brake lever pulsing if the disc is warped when you apply the brake.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

c_dug
Super Spammer



Joined: 04 Sep 2007
Karma :

PostPosted: 10:27 - 25 Apr 2014    Post subject: Reply with quote

If it spins more than once I can't see it being an issue, at least I hope not, my divvy 900 is due it's MOT too and I have the same concern, my SV650 passed a few weeks back with not fantastic brakes though so it should be fine.
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

map
Mr Calendar



Joined: 14 Jun 2004
Karma :

PostPosted: 10:58 - 25 Apr 2014    Post subject: Reply with quote

I agree with the discrepancies in MOT stations.
For many years I took my bikes to a testing station. Usually passed ok except where I'd missed something like too much worn brake pads.

However, they got a new tester, some Polish guy. I think he's maybe out to prove himself (although still the same after about 4 years). He is picky-picky-picky. Example one of my bikes had silver bolts heads in the number plate. Rejected, failed MOT, had to replace with the plastic coloured ones. This on a bike that'd passed 3 years on the trot at same place.

Now take bikes to another tester. He's human and knows the difference between safety and cosmetic nit-picking. Cosmetic goes on advisory, safety gets a fail. Like others above though he'll actually fix something then effectively re-test for you. A man who knows customer service / loyalty.
____________________
...and the whirlwind is in the thorn trees, it's hard for thee to kick against the pricks...
Gibbs, what did Duckie look like when he was younger? Very Happy
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

janner_10
World Chat Champion



Joined: 26 Sep 2011
Karma :

PostPosted: 14:35 - 25 Apr 2014    Post subject: Reply with quote

bamt wrote:


I'm probably just being a little paranoid about this as it is an old-ish (2001) bike. Nor do I have a trusted MOT station (yet). The one I use for cars, who is very good and definitely not inclined to make work, doesn't do bikes.


Your worrying like a old woman to be honest, my bike is older and sat in a barn for 4 years, I just took it in, sat for 30 mins with a coffee. As it happens it passed, but I didn't fret like this.

Join the local forums / plenty of groups on facebook for bikers in any locality where you could get recommendations from.

To me booking and turning up for an MOT is a simple straight forward thing - certainly not worth of fretting and worrying about - get it done.
____________________
Yamaha FZS600 (Now gone to heaven) > CBR600F4i (SOLD) > '99 YZF-R1
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Bunny Lingus
Traffic Copper



Joined: 20 Apr 2014
Karma :

PostPosted: 20:27 - 25 Apr 2014    Post subject: Reply with quote

Trouble is with brakes they can't really let you off with an advisory. My guy has a good writing arm on him but even he didn't like my brake binding. When you kick the caliper does it free off? If so, you can get it failed then strip & grease. As long as there's improvement he should pass it.
____________________
Bunny Lingus & The Flipside Faggots
 Back to top
View user's profile Send private message You must be logged in to rate posts

clancy
World Chat Champion



Joined: 11 Apr 2009
Karma :

PostPosted: 20:44 - 25 Apr 2014    Post subject: Reply with quote

My rvf had very warped discs, rubbed at all points when rotating the wheel and had a strong judder in the brake lever

Never mentioned over 3 mot's for some reason
____________________
KLX 300r
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

moonzoomer
World Chat Champion



Joined: 01 Jul 2012
Karma :

PostPosted: 21:02 - 25 Apr 2014    Post subject: Reply with quote

Vincent wrote:
Unfortunately, some MOT stations will either exaggerate, or completely fabricate problems with bikes and cars in the hope that they can make a bit more money out of the customer. They employ the "if you can't blind 'em with science, baffle 'em with bullshit" work ethic and see someone with perhaps less knowledge about mechanics than others as an opportunity to blag them out of what's in their wallet.
As Polar says, you need to find somewhere that you can trust..... and stick with them. I've used the same stations, different ones for cars and bikes, for the last 20 years or so, even though one is 100 miles away, (although somewhere I regularly visit anyway).
They both offer free re-tests and, if the problem is a small one, for eg a blown bulb, would rectify before proceeding with the MOT. Neither place would pass a vehicle with a serious fault but both exercise a bit of common sense and, most importantly, don't try to rip me off.
Try a post asking for recommended stations in your area, someone on here may know of one.

If you feel you've been targeted, I'd consider naming and shaming this particular garage so others can avoid.
You make a good point about variation of test results from different testers, perhaps GB should follow the NI test system which is totally computer controlled thus removing almost all human input.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

clancy
World Chat Champion



Joined: 11 Apr 2009
Karma :

PostPosted: 21:13 - 25 Apr 2014    Post subject: Reply with quote

Vincent wrote:
I'd like to see more MOT stations and garages being investigated by undercover "customers" and once found guilty of fabricating faults to make profit, not be allowed to work in the trade again.

It's bloomin' expensive enough to drive/ride as it is....without being ripped off by garages.


If they look too close they'll get rid of the "friendly" mot places however Thumbs Down
____________________
KLX 300r
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Bunny Lingus
Traffic Copper



Joined: 20 Apr 2014
Karma :

PostPosted: 21:16 - 25 Apr 2014    Post subject: Reply with quote

moonzoomer wrote:
You make a good point about variation of test results from different testers, perhaps GB should follow the NI test system which is totally computer controlled thus removing almost all human input.


Then there's no discretion. Building up a rapport with the tester has always been my favourite. He gets all your business, you get the job done. For example, my bloke had a quiet word that my steering bearings were past their sell by date but he failed it on a binding brake 'cos he knew that a couple of hours with a spanner & it would be back for retest. £40 for head bearings is a different kettle of fish. A computer is just gonna say nooooooooo. Gimme a humanoid anytime.
____________________
Bunny Lingus & The Flipside Faggots
 Back to top
View user's profile Send private message You must be logged in to rate posts

moonzoomer
World Chat Champion



Joined: 01 Jul 2012
Karma :

PostPosted: 21:24 - 25 Apr 2014    Post subject: Reply with quote

Bunny Lingus wrote:
moonzoomer wrote:
You make a good point about variation of test results from different testers, perhaps GB should follow the NI test system which is totally computer controlled thus removing almost all human input.


Then there's no discretion. Building up a rapport with the tester has always been my favourite. He gets all your business, you get the job done. For example, my bloke had a quiet word that my steering bearings were past their sell by date but he failed it on a binding brake 'cos he knew that a couple of hours with a spanner & it would be back for retest. £40 for head bearings is a different kettle of fish. A computer is just gonna say nooooooooo. Gimme a humanoid anytime.
TBH I would never treat a GB MOT cert as anything other than a worthless piece of paper and would always get a NI test done when I purchase a vehicle from GB regardless if the vehicle has just passed an MOT, I found this out the hard way when I bought a Saab car from England only to find it was totally unroadworthy including none existent rear brakes, a broken front spring and more holes than a teabag but still had a full years GB MOT, having a rapport with your mate down at the test station is one thing (which I agree with) but to allow wrecks on the road is a whole different story.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Bunny Lingus
Traffic Copper



Joined: 20 Apr 2014
Karma :

PostPosted: 21:28 - 25 Apr 2014    Post subject: Reply with quote

clancy wrote:
Vincent wrote:
I'd like to see more MOT stations and garages being investigated by undercover "customers" and once found guilty of fabricating faults to make profit, not be allowed to work in the trade again.

It's bloomin' expensive enough to drive/ride as it is....without being ripped off by garages.


If they look too close they'll get rid of the "friendly" mot places however Thumbs Down


Yeah, agreed. Then it'll start becoming expensive for those of us with older rides. It shouldn't be too hard for peeps to find "friendly" places. If "customers" start getting uppity they'll all start to tighten up & then we'll all suffer the consequences. I've been to a place, one of the wanker showroom gaffs, where the dude wheeled a fucking great machine over to my ride, gave it a rectal probe & failed it on emissions. Give me a shabby ol' workshop every time...
____________________
Bunny Lingus & The Flipside Faggots
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 209 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.09 Sec - Server Load: 0.42 - MySQL Queries: 13 - Page Size: 134.26 Kb