Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Any double glazing fitters about?

Reply to topic
Bike Chat Forums Index -> Dear Auntie BCF...
View previous topic : View next topic  
Author Message

........................
Spanner Monkey



Joined: 15 Jan 2014
Karma :

PostPosted: 19:54 - 03 May 2014    Post subject: Any double glazing fitters about? Reply with quote

Had a bit of a problem with a window this evening - little did I know that someone had jammed a stick between the window and the frame so when I tried to close it the arm that moves in the runner has bent.

https://www.bikechatforums.com/files/photo_135.jpg

Now the problem is that I can't close the window. The runner is held onto the window frame by three screws, if I take this off I'd be able to close the window. However, if I do this is the window going to fall out?

Thanks
 Back to top
View user's profile Send private message You must be logged in to rate posts

........................
Spanner Monkey



Joined: 15 Jan 2014
Karma :

PostPosted: 19:55 - 03 May 2014    Post subject: Reply with quote

Sorry, the photo is 90 degrees out.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 20:08 - 03 May 2014    Post subject: Reply with quote

Seems to me that those screws are all that's holding the window to the frame. Maybe you could remove just the bent bit and have a go at straightening that? I have straightened one before after it got bent by someone fooling about.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

........................
Spanner Monkey



Joined: 15 Jan 2014
Karma :

PostPosted: 20:12 - 03 May 2014    Post subject: Reply with quote

Pete. wrote:
Seems to me that those screws are all that's holding the window to the frame. Maybe you could remove just the bent bit and have a go at straightening that? I have straightened one before after it got bent by someone fooling about.


That's what I was planning to do but was wondering if taking that runner out will put too much pressure on the remaining one and damage that side as well.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 20:56 - 03 May 2014    Post subject: Reply with quote

It will if you don't support the window.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

........................
Spanner Monkey



Joined: 15 Jan 2014
Karma :

PostPosted: 20:57 - 03 May 2014    Post subject: Reply with quote

Fair enough, thought as much, will give it a go, thanks for the pointers.
 Back to top
View user's profile Send private message You must be logged in to rate posts

clancy
World Chat Champion



Joined: 11 Apr 2009
Karma :

PostPosted: 23:55 - 03 May 2014    Post subject: Reply with quote

Keep hold of the bottom of the window, unscrew the hinge that's damaged and pull it shut and lock it. Then obviously don't open the window until you have a new hinge to go on. Once it's shut it won't go nowhere

You say about damaging the other one, as long as you hold the window leaf ad you unscrew the damaged hinge it will be fine. Just don't let go. The hinges will take a lot of bend before they are damaged though so don't be afraid to get a bit rough

Just so you don't get mugged off when replacing the hinge. . I charge £50 to supply and fit a pair of hinges. It's easy as shit to do though so just buy the hinge and fit it yoursel, screw it in the existing holes then you won't need to mess around lining the hinge up to get the window to shut
____________________
KLX 300r
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

defblade
World Chat Champion



Joined: 30 Apr 2009
Karma :

PostPosted: 09:56 - 04 May 2014    Post subject: Reply with quote

TheBaldReverend wrote:
Sorry, the photo is 90 degrees out.


Shocked
I first saw that birdbath as some sort of extractor vent coming out of a wall, with pebble-dash above it... looking harder, I can see that would mean someone had a brick "roof" below it, but isn't it weird how you see what you expect to see... (SMIDSY?)



Sorry, as you were...
____________________
Honda Varadero 125cc => Suzuki Bandit 650 33bhp => 77bhp =>
BMW K1200R Sport 163bhp Twisted Evil => Aprilia Shiver GT 750 95bhp
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 198 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Dear Auntie BCF... All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.07 Sec - Server Load: 0.76 - MySQL Queries: 13 - Page Size: 55.97 Kb