Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


So I did some welding...

 Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :
PostPosted: 08:16 - 11 Nov 2014    Post subject: So I did some welding... Reply with quote
I bought a TIG welder about a month ago and been practicing with it never having done any before. One job I've been putting off was welding the end back on my brake pedal because I was told that cast was more tricky to weld than sheet. It was snapped off a while ago and for a year or to I've had a clutch spring post as a pedal end.

So I cleaned it all up and filed the ends flat, clamped it in place on my bench, tacked it on, checked the alignment. Took the plunge and welded it all up. Not so bad I thought and I stood back to admire my handywork......
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Minty
World Chat Champion



Joined: 23 Dec 2005
Karma :
PostPosted: 08:19 - 11 Nov 2014    Post subject: Reply with quote
Looks to have a tolerance of more than 4 thou.

Needs moar fishfingers too..
____________________
My fingers smell of your mum.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Polarbear
Super Spammer



Joined: 24 Feb 2007
Karma :
PostPosted: 08:30 - 11 Nov 2014    Post subject: Reply with quote
Nice job Thumbs Up

I actually find tig just about the easiest welding medium. I don't for one minute profess to be a welding master (a la 4 thou Laughing ) but I use tig, arc and gas welding with my work and find that really nice to use.

I suppose the big no no for home, and the reason mig is popular is the cost. Gas, filler rods and electrodes aren't cheap, especially for alloys.

I do not like mig!
____________________
Triumph Trophy Launch Edition
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Kris
World Chat Champion



Joined: 03 Feb 2002
Karma :
PostPosted: 08:57 - 11 Nov 2014    Post subject: Reply with quote
Top job as ever Pete!
____________________
NSR125RR - ZXR750H1 - ZX9R E1 - GSF600S - GSF600SK3 - VFR400-NC30 - SV1000N - ST1100-R - CBR900RR-R - GSF1200SK5 - GSF600SK1 - VFR1200FA - GSXR1000K2 - ZZR1400 D8F
www.prisonplanet.com
 Back to top
View user's profile Send private message You must be logged in to rate posts

jaxx
Nova Slayer



Joined: 25 Jul 2009
Karma :
PostPosted: 12:29 - 11 Nov 2014    Post subject: Reply with quote
Nice job... It just makes it more painful that you're gonna have to cut it off and weld it back on the other side... Laughing
 Back to top
View user's profile Send private message You must be logged in to rate posts

Musketeer
World Chat Champion



Joined: 27 Jun 2011
Karma :
PostPosted: 12:41 - 11 Nov 2014    Post subject: Reply with quote
jaxx wrote:
Nice job... It just makes it more painful that you're gonna have to cut it off and weld it back on the other side... Laughing


Exactly my thoughts Wink

https://i37.photobucket.com/albums/e85/motorcyclesJZ/Random/s_57_zpsb414aa24.jpg
____________________
Current Bike: Yamaha XSR900 Previous bikes: Honda CBR1000RR Fireblade, Kawasaki ZX-6R Ninja, Aprilia RS125 2-stroke
 Back to top
View user's profile Send private message You must be logged in to rate posts

jaxx
Nova Slayer



Joined: 25 Jul 2009
Karma :
PostPosted: 13:16 - 11 Nov 2014    Post subject: Reply with quote
Laughing Y'know, after posting that I had to quickly check Google images to make sure.
Either way, that weld does look good... I'm sure it'll be even better next time... Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 16:22 - 11 Nov 2014    Post subject: Reply with quote
Just treat it as practice for rewelding it the right way round. Thumbs Up Laughing
 Back to top
View user's profile Send private message You must be logged in to rate posts

beardface
Spanner Monkey



Joined: 19 Aug 2013
Karma :
PostPosted: 16:35 - 11 Nov 2014    Post subject: Reply with quote
Ouch, lol.
____________________
www.soundcloud.com/bodren
 Back to top
View user's profile Send private message You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :
PostPosted: 16:35 - 11 Nov 2014    Post subject: Reply with quote
Been there done that (or similar)
Admiring my handiwork followed by the
"Oh bollocks!" moment.
Ho hum and all that
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts

Bubbs
World Chat Champion



Joined: 28 May 2009
Karma :
PostPosted: 16:48 - 11 Nov 2014    Post subject: Reply with quote
jaxx wrote:
Nice job... It just makes it more painful that you're gonna have to cut it off and weld it back on the other side... Laughing


Laughing Laughing Laughing

.............................


Nice weld though... Had you done anything with welding before that? Never tried it myself and would like to give it a crack
____________________
Life begins at the end of your comfort zone.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :
PostPosted: 18:55 - 11 Nov 2014    Post subject: Reply with quote
jaxx wrote:
Nice job... It just makes it more painful that you're gonna have to cut it off and weld it back on the other side... Laughing


https://reactimg.com/images/f73d69370b3f0a6a3a6c12c2e066cbb5.jpg
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

mysterious_rider
World Chat Champion



Joined: 11 Sep 2010
Karma :
PostPosted: 19:21 - 11 Nov 2014    Post subject: Reply with quote
any tips on it? Bought myself a parweld lift tig and i cant get on with it.

It seems to constantly blow holes etc. Any idea on the rough settings with thinner metals?
____________________
KAWASAKIIIII
 Back to top
View user's profile Send private message You must be logged in to rate posts

Aff
World Chat Champion



Joined: 05 May 2011
Karma :
PostPosted: 19:33 - 11 Nov 2014    Post subject: Reply with quote
mysterious_rider wrote:
any tips on it? Bought myself a parweld lift tig and i cant get on with it.

It seems to constantly blow holes etc. Any idea on the rough settings with thinner metals?


Gonna be a problem when you're doing scratch start, so have no pedal.

Thats why its only really used for heavier stuff.

Scratch start is a different ball game to standard TIG.
____________________
Current Bikes:Honda 929RR Fireblade, Honda CD200 Benly (Project), Stomp Z2 140
Electric Bike Project
 Back to top
View user's profile Send private message You must be logged in to rate posts

mysterious_rider
World Chat Champion



Joined: 11 Sep 2010
Karma :
PostPosted: 19:39 - 11 Nov 2014    Post subject: Reply with quote
i did wonder, I can do it at work a little but at home with my setup no way. Laughing Ah well. It works very well as an arc, and can weld quite small stuff. Nevermind. Laughing
____________________
KAWASAKIIIII
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :
PostPosted: 20:37 - 11 Nov 2014    Post subject: Reply with quote
mysterious_rider wrote:
any tips on it? Bought myself a parweld lift tig and i cant get on with it.

It seems to constantly blow holes etc. Any idea on the rough settings with thinner metals?


Yeah, keep above 2mm thickness for practice. I find ally easier than stainless, I keep touching down the tungsten on stainless a lot and I find it less forgiving than ally if you get the current wrong. One thing I am getting over is trying to weld with too little amps. You worry that it'll blow holes but in reality all you have to do is move faster.

Pedal is fitted now BTW. After my initial moment of pique I just cut it off an dlfipped it over.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

kestrel
Nearly there...



Joined: 04 Sep 2006
Karma :
PostPosted: 22:15 - 11 Nov 2014    Post subject: Reply with quote
Pete. wrote:

Yeah, keep above 2mm thickness for practice. I find ally easier than stainless, I keep touching down the tungsten on stainless a lot and I find it less forgiving than ally if you get the current wrong. One thing I am getting over is trying to weld with too little amps. You worry that it'll blow holes but in reality all you have to do is move faster.

Pedal is fitted now BTW. After my initial moment of pique I just cut it off an dlfipped it over.


You're correct Pete, ally is much more forgiving than stainless as arc length and torch control are not as critical with ally as they are with stainless and carbon steel.
Not sure what torch you're using but if it's a fixed head then the best advice I can give you is to swap it out for a flexi head, something like a WP17 or WP24. Using a flexi head torch allows you to rotate and bend the torch to achieve the correct torch angle without having to place your hand in an awkward position, this will go a long way to improving torch control and reducing the number of touch downs.
Use a short back cap on the torch and cut your tungstens in half and sharpen both ends, if you do touch down it's simply a case of pulling the tungsten out with a pair of long nosed pliers, turning it round and sticking it back in the collet and you're away again. Keep your tungstens SHARP for stainless and arc length as close as possible.
You'll know when you're 'getting there' it's when you spend more time welding than you do sharpening tungstens!
____________________
Isle of Man.........Road Racing Capital Of The World
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 11 years, 190 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.14 Sec - Server Load: 3.15 - MySQL Queries: 13 - Page Size: 96.64 Kb