Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Loss of rev , temp gauge and electrics on Vfr Nc30

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Juicyjayjay
L Plate Warrior



Joined: 08 May 2015
Karma :
PostPosted: 08:14 - 08 May 2015    Post subject: Loss of rev , temp gauge and electrics on Vfr Nc30 Reply with quote
Hi all

Im new to this forum , all the help i can get would be greatly appreciated.

Took my vfr out for a spin , this only started yesterday , for the first few miles the bike was running fine and all of a sudden temp gauge and rev gauge are non operational ,the lights on the bike and around ignition are non functional , the bike has lost alot off power almost seems as if it was running out of gas like the bike was stammering and shaking then all of a sudden everything is working again.

Please any help would be greatly appreciated.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

RhynoCZ
Super Spammer



Joined: 09 Mar 2012
Karma :
PostPosted: 08:36 - 08 May 2015    Post subject: Reply with quote
Check the fuse box, then the wiring on the back side of the clocks and around the main fuse. Thumbs Up
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor
 Back to top
View user's profile Send private message You must be logged in to rate posts

Juicyjayjay
L Plate Warrior



Joined: 08 May 2015
Karma :
PostPosted: 08:42 - 08 May 2015    Post subject: Reply with quote
RhynoCZ wrote:
Check the fuse box, then the wiring on the back side of the clocks and around the main fuse. Thumbs Up


Thanks Rhyno , i do ride alot of bumpy roads , ill check it out
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

RhynoCZ
Super Spammer



Joined: 09 Mar 2012
Karma :
PostPosted: 08:59 - 08 May 2015    Post subject: Reply with quote
Juicyjayjay wrote:
RhynoCZ wrote:
Check the fuse box, then the wiring on the back side of the clocks and around the main fuse. Thumbs Up


Thanks Rhyno , i do ride alot of bumpy roads , ill check it out


Also, check the battery leads and terminals, I've seen many bikes with damaged terminals and when on a bumpy road it was disconnecting the battery from the the circuit. Corrosion on the terminals also can lead to such a behaviour, clean the terminals while you're in there.
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor
 Back to top
View user's profile Send private message You must be logged in to rate posts

Juicyjayjay
L Plate Warrior



Joined: 08 May 2015
Karma :
PostPosted: 09:25 - 08 May 2015    Post subject: Reply with quote
The battery i currently have on the bike is a sealed battery which started leaking abit of battery acid but stopped , waiting for stock from the battery centre , its been running ok for awhile now even with the damaged battery , gotta run start it at times but just yesterday it has started with the problems , iv also checked wiring where the battery acid spilt
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

Juicyjayjay
L Plate Warrior



Joined: 08 May 2015
Karma :
PostPosted: 10:18 - 08 May 2015    Post subject: Reply with quote
Vincent wrote:
Juicyjayjay wrote:

i do ride alot of bumpy roads ,


Make sure the CDI is fastened down correctly. If they can move about, it can damage the wires where they enter the box. Sounds like you may have a loose connection somewhere.


where would i be able to locate the cdi unit, i don't have a clear wiring diagram on hand. So all my power loss could just be from some faulty wiring? Shocked
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

RhynoCZ
Super Spammer



Joined: 09 Mar 2012
Karma :
PostPosted: 11:11 - 08 May 2015    Post subject: Reply with quote
Well now, leaking battery, dropping charge, well, get a new battery and if you still gonna have problems, it's all the above said. Thumbs Up
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor
 Back to top
View user's profile Send private message You must be logged in to rate posts

Juicyjayjay
L Plate Warrior



Joined: 08 May 2015
Karma :
PostPosted: 08:17 - 11 May 2015    Post subject: Reply with quote
RhynoCZ wrote:
Well now, leaking battery, dropping charge, well, get a new battery and if you still gonna have problems, it's all the above said. Thumbs Up


Update on the issue i finally received my new battery popped it in and same problem , i then proceeded to do full wiring check to find 2 bubbled up/half melted fuses in the fuse box aswell as a blackening around one of the pins on the regulator.

I wonder if there is not another issue causing all of this.

Please help Shocked
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

mentalboy
World Chat Champion



Joined: 05 May 2012
Karma :
PostPosted: 08:48 - 11 May 2015    Post subject: Reply with quote
Considering that you have no manual (probably wouldn't hurt to buy one if you like to try to fix stuff yourself rather than have a garage do it) photo's indicating the positions of the dead fuses may help us identify which circuits have issues
____________________
Make mine a Corona.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Juicyjayjay
L Plate Warrior



Joined: 08 May 2015
Karma :
PostPosted: 09:50 - 11 May 2015    Post subject: Reply with quote
mentalboy wrote:
Considering that you have no manual (probably wouldn't hurt to buy one if you like to try to fix stuff yourself rather than have a garage do it) photo's indicating the positions of the dead fuses may help us identify which circuits have issues



The fuses that blew were for the ignition lights the neutral and indicator , funny enough the headlights didnt blow at all , the other was for the temp gauge which is now working , i will put up a picture when i get back , also wondering what could burn/blacken the one pin on the regulator?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 11 years, 171 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.12 Sec - Server Load: 0.4 - MySQL Queries: 13 - Page Size: 71.28 Kb