Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


ZZR400 De-restriction

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

BillyJ
Nearly there...



Joined: 07 Jan 2013
Karma :
PostPosted: 22:49 - 28 Jun 2015    Post subject: ZZR400 De-restriction Reply with quote
Are they all restricted to 114kph via the speedo?

Wouldn't go over 100kph, put in kph to mph converter, now wont go over 60mph, so same speed but different needle position.

Is it likely that it is restricted in top gear to a certain RPM?

I am vaguely familiar with the M Max boxes for bypassing the restrictor but should I take the clocks apart to see if there is a different restricting mechanism in there as the converter didn't seem to fix it?
____________________
Had: '06 CBR125R + '01 GSF600 + '07 SPRINT ST 1050 + '80 CB250 RSA + '93 Ducati 900SS
Have: '13 GSXR-1000 + '01 CB500S
"The aryan confuser"
 Back to top
View user's profile Send private message You must be logged in to rate posts

wr6133
World Chat Champion



Joined: 31 Dec 2013
Karma :
PostPosted: 07:58 - 29 Jun 2015    Post subject: Reply with quote
There is a pink wire going to the CDI, cut it and shove a resistor on it. Full detailed instructions are on zzr international.

It sounds like something is (very) wrong with yours though, the converter trick should have worked. Is it limiting to 10k RPM in each gear?... if so that means someone badly bodged a bypass and the failsafe has kicked in.

Easiest way is just swap the CDI for a ZZR600 part (600D CDI if you have a 400k, or 600E CDI if you have a 400N).
 Back to top
View user's profile Send private message You must be logged in to rate posts

BillyJ
Nearly there...



Joined: 07 Jan 2013
Karma :
PostPosted: 09:02 - 29 Jun 2015    Post subject: Reply with quote
Very helpful, thank you Karma Thumbs Up

It stops at 10K RPM.

I can't get on to zzr international, been trying for a day but the page just times out.

So I put a resistor in line with the pink wire? And what resistor value?

EDIT: Got in through a proxy for some reason, I'll have a look now, thanks again Thumbs Up
____________________
Had: '06 CBR125R + '01 GSF600 + '07 SPRINT ST 1050 + '80 CB250 RSA + '93 Ducati 900SS
Have: '13 GSXR-1000 + '01 CB500S
"The aryan confuser"
 Back to top
View user's profile Send private message You must be logged in to rate posts

wr6133
World Chat Champion



Joined: 31 Dec 2013
Karma :
PostPosted: 09:39 - 29 Jun 2015    Post subject: Reply with quote
BillyJ wrote:
Very helpful, thank you Karma Thumbs Up

It stops at 10K RPM.


If it's 10k in every gear that would be the failsafe for the limiter. Means some potato has tried to bypass it and screwed up. Topping out at 60 though in top even with the failsafe seems wrong though, unless you have non standard sprockets, mine had the failsafe due to prior owner bodgery when I bought it and I could still manage a ton (just) in top.

Ref using a resistor to bypass this is a paste from someone at zzr international


Quote:
There are a few ways to bypass this, I'll tell you the easiest.
Fist, buy a 10kOhm resistor rated to at least 1W.
That's all you need...

If you take your seat off and look at your CDI/ignitor box you will find a pink wire going in to it.
Snip the wire at a reasonable length.
Put the end of the pink wire going to the CDI to the resistor.
Find a clean earth.
Connect the other side of the resistor to earth.
Tape up the unused pink wire just for safety etc.


You are going to need to find the prior bodge first though that is causing it to failsafe.

I ended up using a 600 CDI as mine had multiple snips at either end of the pink along with crap attempts at adding a resistor and in the end I couldn't be arsed making it all right. I think I paid about £20 for the CDI, as the 600 has no restriction it just ignores any feed from the pink.

You have a K or N model?
 Back to top
View user's profile Send private message You must be logged in to rate posts

BillyJ
Nearly there...



Joined: 07 Jan 2013
Karma :
PostPosted: 09:45 - 29 Jun 2015    Post subject: Reply with quote
Mine is the one with no fuel pump, I believe that's the K model

Is this what I want?

https://www.ebay.co.uk/itm/Kawasaki-ZZR600-D-CDI-Ignitor-Box-/191602025896?pt=LH_DefaultDomain_3&hash=item2c9c5ee5a8
____________________
Had: '06 CBR125R + '01 GSF600 + '07 SPRINT ST 1050 + '80 CB250 RSA + '93 Ducati 900SS
Have: '13 GSXR-1000 + '01 CB500S
"The aryan confuser"
 Back to top
View user's profile Send private message You must be logged in to rate posts

wr6133
World Chat Champion



Joined: 31 Dec 2013
Karma :
PostPosted: 09:57 - 29 Jun 2015    Post subject: Reply with quote
BillyJ wrote:
Mine is the one with no fuel pump, I believe that's the K model

Is this what I want?

https://www.ebay.co.uk/itm/Kawasaki-ZZR600-D-CDI-Ignitor-Box-/191602025896?pt=LH_DefaultDomain_3&hash=item2c9c5ee5a8


That's the one just plugs right in.

K model is the no pump, downsleeved 600d (1990-1992). I have one too.

If you want PDF's of the kwak workshop manual and the Haynes (for the 600 but almost all the same) PM me an email address and I'll send them when I get time.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :
PostPosted: 10:27 - 29 Jun 2015    Post subject: Reply with quote
Hi

Japanese market speed restriction was at 180kmh, which is 112mph.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

There is a gap of 9 years, 335 days between these two posts...

Natman2002nz
L Plate Warrior



Joined: 28 May 2025
Karma :
PostPosted: 07:51 - 28 May 2025    Post subject: Reply with quote
Sorry to bump an old post but....

I am looking to upgrade my tired 400k motor with a 600d I have acquired (motor only, no loom or anything)
By being able to use the 600d CDI on the 400k, would that mean I could use my Japanese spec 400k CDI with a 600d motor or do I need to find a 600d CDI?
 Back to top
View user's profile Send private message You must be logged in to rate posts

MarJay
But it's British!



Joined: 15 Sep 2003
Karma :
PostPosted: 09:00 - 28 May 2025    Post subject: Reply with quote
Don’t resurrect 9 year old posts. It’s very impolite.

I doubt the 400 ignition parts will work on the 600 engine. Honestly 600s are so damn cheap right now you’d be better off selling the 400 and buying a 600. Insurance will be easier and you won’t have to mess with registration and so on.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Evil Hans
World Chat Champion



Joined: 08 Nov 2015
Karma :
PostPosted: 12:19 - 28 May 2025    Post subject: Reply with quote
Natman2002nz wrote:
Sorry to bump an old post


So why do it?
____________________
Triumph Sprint ST 1050. And it's Red.
 Back to top
View user's profile Send private message You must be logged in to rate posts

CaNsA
Super Spammer



Joined: 02 Jan 2008
Karma :
PostPosted: 04:38 - 29 May 2025    Post subject: Reply with quote
Natman2002nz wrote:
Sorry to bump an old post but....

I am looking to upgrade my tired 400k motor with a 600d I have acquired (motor only, no loom or anything)
By being able to use the 600d CDI on the 400k, would that mean I could use my Japanese spec 400k CDI with a 600d motor or do I need to find a 600d CDI?


Head over to https://www.zxrworld.co.uk/zxr400oc/
 Back to top
View user's profile Send private message You must be logged in to rate posts
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.13 Sec - Server Load: 0.45 - MySQL Queries: 13 - Page Size: 70.76 Kb