Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Anyone with a xj600 in Hampshire that can help?

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

R1stu
Shrek!



Joined: 12 Mar 2003
Karma :

PostPosted: 23:48 - 27 Feb 2016    Post subject: Anyone with a xj600 in Hampshire that can help? Reply with quote

Ok still can't get firing right. So far I have done the follwing

new fuel lines
new carbs striped us cleaned, rebuilt with new jets, gaskets and balanced
new engine
new coils
new caps
new ignition
new fuel tap

the only thing I have not replaced is the fuel pump and cdi. All 4 cylinders are now hot, but only runs on choke and won't go past 4K. Plugs are all sparking, they were black. I can't believe it's the engine.

is there anyone in Hampshire if Dorset that can pop down, and maybe let me try their carbs on my bike? I am going to try and by pass the fuel pump tomorrow see if helps, if not what next?
____________________
Carbon closet tart! https://www.bikepics.com/members/r6stuk/02r6/
Stolen bike. 2000 R1: https://www.bikepics.com/members/r6stuk/00r1/
Current bike 1991 Honda ST1100 Pan European, 1986 Honda cb350sg (Finished)
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :

PostPosted: 23:56 - 27 Feb 2016    Post subject: Reply with quote

did you replace all of the float valve needles?

Float heights correct? Do the floats float?
____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

R1stu
Shrek!



Joined: 12 Mar 2003
Karma :

PostPosted: 00:19 - 28 Feb 2016    Post subject: Reply with quote

Don't think the needles been replaced, I assume the guy rebuilding them, done the float heights. Just want to try another set of carbs from a working bike.n Confused
____________________
Carbon closet tart! https://www.bikepics.com/members/r6stuk/02r6/
Stolen bike. 2000 R1: https://www.bikepics.com/members/r6stuk/00r1/
Current bike 1991 Honda ST1100 Pan European, 1986 Honda cb350sg (Finished)
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :

PostPosted: 00:52 - 28 Feb 2016    Post subject: Reply with quote

https://www.triumphrat.net/photogallery/d/99219-2/abr.jpg

Have a look yourself. Carbs are easy to work on. Pic above is of a worn out needle. Those go and the thing will flood like crazy and refuse to run properly.
____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

R1stu
Shrek!



Joined: 12 Mar 2003
Karma :

PostPosted: 01:08 - 28 Feb 2016    Post subject: Reply with quote

I'll take them off again tomorrow, and get the macro lense on it.
____________________
Carbon closet tart! https://www.bikepics.com/members/r6stuk/02r6/
Stolen bike. 2000 R1: https://www.bikepics.com/members/r6stuk/00r1/
Current bike 1991 Honda ST1100 Pan European, 1986 Honda cb350sg (Finished)
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

.....
Quote Me Happy



Joined: 15 Jan 2005
Karma :

PostPosted: 09:43 - 28 Feb 2016    Post subject: Reply with quote

R1stu wrote:
I'll take them off again tomorrow, and get the macro lense on it.


You could just look at them.
 Back to top
View user's profile Send private message You must be logged in to rate posts

R1stu
Shrek!



Joined: 12 Mar 2003
Karma :

PostPosted: 19:25 - 28 Feb 2016    Post subject: Reply with quote

right looks like its the carbs again. here is a vid I made 1st thing.
https://www.youtube.com/watch?v=NAoQX2gGGT8&feature=youtube_gdata

then I took the carbs off, jus to check,

https://www.youtube.com/watch?v=_Tfc-ezWyuY&feature=youtube_gdata

after an hour of cleaning out she runs a lot better, dose this knock sound like the clutch rattle? its coming from the back of the engine I am assuming it is the little pin that the xj600 suffers from.

Now to get this thing on the road, just need to order a repair kit for the fuel tap, then insure for a month and then get mot'd

Ive just brought a pan european, so this will be a spare, or will sale off.

a tank of fuel and redex should sort the rest out.
____________________
Carbon closet tart! https://www.bikepics.com/members/r6stuk/02r6/
Stolen bike. 2000 R1: https://www.bikepics.com/members/r6stuk/00r1/
Current bike 1991 Honda ST1100 Pan European, 1986 Honda cb350sg (Finished)
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

Hahadumball
World Chat Champion



Joined: 07 Oct 2015
Karma :

PostPosted: 19:40 - 28 Feb 2016    Post subject: Reply with quote

they all rattle, if it doesnt rattle walk away its clearly broken
____________________
Fin: no matter how much I look at It I can't understand what was going through my head, all I remember is going about 80 and redlining it to stop it seizing.
360 Deg... Five 1/4 turns. :- Teflon-Mike 18 Jan 2015
 Back to top
View user's profile Send private message You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :

PostPosted: 19:51 - 28 Feb 2016    Post subject: Reply with quote

Paul Vtr wrote:
they all rattle, if it doesnt rattle walk away its clearly broken


Yup they are pretty rattly even when in fine fettle.
____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

R1stu
Shrek!



Joined: 12 Mar 2003
Karma :

PostPosted: 20:13 - 28 Feb 2016    Post subject: Reply with quote

https://www.youtube.com/watch?v=WaImOCh1G6I&feature=youtube_gdata
____________________
Carbon closet tart! https://www.bikepics.com/members/r6stuk/02r6/
Stolen bike. 2000 R1: https://www.bikepics.com/members/r6stuk/00r1/
Current bike 1991 Honda ST1100 Pan European, 1986 Honda cb350sg (Finished)
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

Robby
Dirty Old Man



Joined: 16 May 2002
Karma :

PostPosted: 20:17 - 28 Feb 2016    Post subject: Reply with quote

So did all of that shit on the jets accumulate in a short period of time?

If so, your tank must be filthy. Clean it out.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Hahadumball
World Chat Champion



Joined: 07 Oct 2015
Karma :

PostPosted: 20:24 - 28 Feb 2016    Post subject: Reply with quote

thats not a rattle!! thats a damn clunk!
____________________
Fin: no matter how much I look at It I can't understand what was going through my head, all I remember is going about 80 and redlining it to stop it seizing.
360 Deg... Five 1/4 turns. :- Teflon-Mike 18 Jan 2015
 Back to top
View user's profile Send private message You must be logged in to rate posts

R1stu
Shrek!



Joined: 12 Mar 2003
Karma :

PostPosted: 23:00 - 28 Feb 2016    Post subject: Reply with quote

There's been no fuel in the tank in fact the tanks not been on the bike. I just filed the carbs with fuel. It's clunky lol but revs fine now insured both bikes now, so will get it together to get to garage to balance and mot
____________________
Carbon closet tart! https://www.bikepics.com/members/r6stuk/02r6/
Stolen bike. 2000 R1: https://www.bikepics.com/members/r6stuk/00r1/
Current bike 1991 Honda ST1100 Pan European, 1986 Honda cb350sg (Finished)
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

Tdibs
Traffic Copper



Joined: 16 Jan 2015
Karma :

PostPosted: 19:34 - 29 Feb 2016    Post subject: Reply with quote

That sounds way more violent than the clutch rattle imo, you can quite distinctly tell what the clutch rattle is by putting it in first, listen, then back into neutral and you will hear it rattle unless it has the dowel replaced to kill the rattle.

Something lose or valves possibly (?)
____________________
Previous : 09 Vanvan 125| 02' Sv650s || Current: 1999 Xj600n | 1992 DR650 RSE | 2005 Fazer 1000
 Back to top
View user's profile Send private message You must be logged in to rate posts

Carvel
World Chat Champion



Joined: 01 Jun 2010
Karma :

PostPosted: 20:16 - 29 Feb 2016    Post subject: Reply with quote

That sounds fucked.
____________________
2002 Aprilia RSV1000R, Cbr600Fs, Mk1 B12, Vfr400 NC30...

Matt B: I can deal with crushed nuts to beat Ollie.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 10 years, 212 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 0.83 - MySQL Queries: 13 - Page Size: 87.87 Kb