Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Fork seal leak and stanchion repair :(

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

john24ssj
Trackday Trickster



Joined: 08 Aug 2014
Karma :
PostPosted: 11:33 - 26 Mar 2016    Post subject: Fork seal leak and stanchion repair :( Reply with quote
Hi Guys,

So my fork seal started leaking I took the forks a part and realised that the stanchion is at fault here as it has small rust bumps in it which cut the seal.

I can't afford a new stanchion is there any way I could repair it?

Thanks
____________________
Bikes: Honda CBR600Fi, Kawasaki ER5

Last edited by john24ssj on 13:08 - 26 Mar 2016; edited 1 time in total
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pjay
World Chat Champion



Joined: 18 Jan 2016
Karma :
PostPosted: 11:51 - 26 Mar 2016    Post subject: Reply with quote
I know it sounds odd, but I have in the past used kitchen foil scrunched up soaked* in T-Cut. It works in the theory that the foil wont damage the stanchion, but along with the mild abrasive properties of the T-Cut, it gives you just enough abrasion to remove the rust and not affect the chroming.


Someone is bound to call me an idiot, but it has worked a treat for me on more than one occasion.





*I know foil wont soak.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :
PostPosted: 12:25 - 26 Mar 2016    Post subject: Reply with quote
Pjay wrote:
Someone is bound to call me an idiot

You learn fast. Thumbs Up

I'm a fan of foil + vinegar for cleaning chrome. Some people use coca-cola as an acid.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

Robby
Dirty Old Man



Joined: 16 May 2002
Karma :
PostPosted: 12:29 - 26 Mar 2016    Post subject: Reply with quote
The only proper repair is to rechrome or replace. Both are expensive.

A fix that may work is just sanding it back. If the pitting very bad, use fine emery paper with gentle pressure. If the pitting isn't too bad, rub it down with a finishing pad. This will remove the roughness and high points and give the seal a fighting chance.

Remember that rust is a lot softer than chrome - so you can sand it a bit. The rust will wear away long before the chrome is affected in any way, and it doesn't matter if you wear away a microscopic bit of chrome - the stanchion is fucked already.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 15:51 - 26 Mar 2016    Post subject: Reply with quote
Robby wrote:
The only proper repair is to rechrome or replace. Both are expensive.

A fix that may work is just sanding it back. If the pitting very bad, use fine emery paper with gentle pressure. If the pitting isn't too bad, rub it down with a finishing pad. This will remove the roughness and high points and give the seal a fighting chance.

Remember that rust is a lot softer than chrome - so you can sand it a bit. The rust will wear away long before the chrome is affected in any way, and it doesn't matter if you wear away a microscopic bit of chrome - the stanchion is fucked already.


This^^

Fine emery, light pressure and check your progress frequently. This will also hone the edges off of any pits and should get you going.

If the stanchions are very badly pitted then there's a ghetto fix using epoxy resin to fill the pits that'll last a while. If you search the forum for stanchion repair and author Stinkwheel, you'll find a detailed post.
 Back to top
View user's profile Send private message You must be logged in to rate posts

whitedevil
World Chat Champion



Joined: 28 Nov 2010
Karma :
PostPosted: 16:29 - 26 Mar 2016    Post subject: Reply with quote
Islander wrote:
Robby wrote:
The only proper repair is to rechrome or replace. Both are expensive.

A fix that may work is just sanding it back. If the pitting very bad, use fine emery paper with gentle pressure. If the pitting isn't too bad, rub it down with a finishing pad. This will remove the roughness and high points and give the seal a fighting chance.

Remember that rust is a lot softer than chrome - so you can sand it a bit. The rust will wear away long before the chrome is affected in any way, and it doesn't matter if you wear away a microscopic bit of chrome - the stanchion is fucked already.


This^^

Fine emery, light pressure and check your progress frequently. This will also hone the edges off of any pits and should get you going.

If the stanchions are very badly pitted then there's a ghetto fix using epoxy resin to fill the pits that'll last a while. If you search the forum for stanchion repair and author Stinkwheel, you'll find a detailed post.

I've done similar with super glue instead of resin. It works great.
____________________
GPZ500 sold ~ CBR600FS-2 sold ~ ZX6R sold ~ Street Triple R
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Skudd
Super Spammer



Joined: 01 Oct 2006
Karma :
PostPosted: 16:43 - 26 Mar 2016    Post subject: Reply with quote
Does everyone split the forks when changing the seals, mine are a pain to split.
____________________
Famous last words of Humpty Dumpty. " Stop pushing me "
Petty Anarchists look at "1984".............. The Visionary looks at "Animal Farm".
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 16:55 - 26 Mar 2016    Post subject: Reply with quote
Skudd wrote:
Does everyone split the forks when changing the seals, mine are a pain to split.


How else can you check and change the bushes and clean the shite out of the fork bottom and damper rod?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :
PostPosted: 19:02 - 26 Mar 2016    Post subject: Reply with quote
Skudd wrote:
Does everyone split the forks when changing the seals, mine are a pain to split.


All forks are a pain to split....
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Triumph Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

mauzo
Nova Slayer



Joined: 30 Jun 2015
Karma :
PostPosted: 22:19 - 26 Mar 2016    Post subject: Reply with quote
Pjay wrote:
I know it sounds odd, but I have in the past used kitchen foil scrunched up soaked* in T-Cut. It works in the theory that the foil wont damage the stanchion, but along with the mild abrasive properties of the T-Cut, it gives you just enough abrasion to remove the rust and not affect the chroming.

It's not just the abrasion: 'tin' foil is actually aluminium, so the acid encourages a thermite-type reaction which turns the rust back into steel.
____________________
'04 CG125, '07 CBF500
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 22:36 - 26 Mar 2016    Post subject: Reply with quote
mauzo wrote:

It's not just the abrasion: 'tin' foil is actually aluminium, so the acid encourages a thermite-type reaction which turns the rust back into steel.


What did I just read?? Shocked Rolling Eyes

If it were any type of 'thermite- type reaction' You'd be in a lot of pain as you severely burned the ends of your fingers. Laughing
 Back to top
View user's profile Send private message You must be logged in to rate posts

mauzo
Nova Slayer



Joined: 30 Jun 2015
Karma :
PostPosted: 23:53 - 26 Mar 2016    Post subject: Reply with quote
Islander wrote:
mauzo wrote:

It's not just the abrasion: 'tin' foil is actually aluminium, so the acid encourages a thermite-type reaction which turns the rust back into steel.


What did I just read?? Shocked Rolling Eyes

If it were any type of 'thermite- type reaction' You'd be in a lot of pain as you severely burned the ends of your fingers. Laughing


It's not the highly-energetic reaction you get when it burns, obviously Smile.
____________________
'04 CG125, '07 CBF500
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 00:06 - 27 Mar 2016    Post subject: Reply with quote
The reason aluminium works is that you're actually using aluminium oxide from the surface of the foil and that harder than steel and acts as an abrasive.
 Back to top
View user's profile Send private message You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :
PostPosted: 01:15 - 27 Mar 2016    Post subject: Reply with quote
Nobby the Bastard wrote:
All forks are a pain to split....


It's a 5 minute job on sachs forks.

I was able to replace the fork seals on a K75, refill with oil and refit the front wheel in a grand total of 15-20 minutes.
____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 01:19 - 27 Mar 2016    Post subject: Reply with quote
temeluchus wrote:
Nobby the Bastard wrote:
All forks are a pain to split....


It's a 5 minute job on sachs forks.

I was able to replace the fork seals on a K75, refill with oil and refit the front wheel in a grand total of 15-20 minutes.


The ability to drain and refill them without having to remove them is something all fork designs should incorporate. Superb design. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :
PostPosted: 01:34 - 27 Mar 2016    Post subject: Reply with quote
Islander wrote:

The ability to drain and refill them without having to remove them is something all fork designs should incorporate. Superb design. Thumbs Up


managed it in under ten when we did my chums K100, for a giggle.

jack under motor, remove wheel and bungee the calipers out the way, put a big pan under the forks, undo bolts and pull off sliders and led the oil splat out into the gert pan. Yank the seals out, put in the fresh, stuff the sliders back on and re tighten the bolts, wipe the oil splashes off, wheel and calipers back on. squeeze fresh oil back in from the top, cap screw back in.

Stanchions stay in the yokes, the sliders stay attached to the brace and mudguard and the fork caps have holes in em so you usually only need to remove them to replace the springs.

After working on forks that seem to be designed by Japanese sadists it was one of the most beautiful things I had ever seen.
____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Ichy
World Chat Champion



Joined: 15 Jul 2005
Karma :
PostPosted: 08:45 - 27 Mar 2016    Post subject: Reply with quote
Skudd wrote:
Does everyone split the forks when changing the seals, mine are a pain to split.


No, not always. At risk you can use a wood screw to pull the seal out.
____________________
https://www.metacafe.com/watch/1972097/how_to_behave_on_a_forum/
 Back to top
View user's profile Send private message You must be logged in to rate posts

john24ssj
Trackday Trickster



Joined: 08 Aug 2014
Karma :
PostPosted: 13:39 - 27 Mar 2016    Post subject: Reply with quote
Thanks for all the replies guys Smile Cleaned off as much crap of the forks as I could and will see if the new seal will hold, if not I'll try to find the forks on ebay or something.
____________________
Bikes: Honda CBR600Fi, Kawasaki ER5
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 9 years, 278 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 0.47 - MySQL Queries: 13 - Page Size: 102.78 Kb