YBR 125 Stripped Exhaust socket cap bolts : Solved

[DanteKrys]

Hi,
How can I remove a striped exhaust cap bolt. The bolts are small (8mm). I was able move them half turn before I striped the bolts. They should be quite lose but not enough to move them using pilers
.would a nut-splitter work for it?
____________________
Ybr125

[ADSrox0r]

Either weld a nut onto the end or cut a slit across and use a manual impact driver and twat it out. Saying that though if they're already loose then just cut a slit and use a big flat blade screwdriver.
____________________
Current bikes: '08 VFR 800 VTEC(yo) , '07 ZZR1400 Winter hack: '95 Aprilia 650 Pegaso Currently lusting after: RC30

[DanteKrys]

I warmed up the engine before I heated up the bolt with a blow torch. Then covered the bolt with a piece of cloth and used a 9mm socket piece. It worked. Nevertheless, thx for help.
____________________
Ybr125