Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


YBR 125 starting issues fault code 19

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

flabdog
L Plate Warrior



Joined: 07 Mar 2019
Karma :
PostPosted: 17:46 - 07 Mar 2019    Post subject: YBR 125 starting issues fault code 19 Reply with quote
Hi all 16 plate ybr 125 causing a bad head at the mo. Put the key in the ignition switch to on and half the time nothing. Switching between on and off and eventually the dash lights up ready to go. The bike now and again just turns over and wont start. I have noticed the engine light blinks once followed by 9 short blinks. Looking at other posts I am guessing this is error code 19. Does this sound like my ignition barrel is shot causing the error code ?
Cheers
 Back to top
View user's profile Send private message You must be logged in to rate posts

Meatybeaty
World Chat Champion



Joined: 10 Apr 2016
Karma :
PostPosted: 17:56 - 07 Mar 2019    Post subject: Reply with quote
Check Black/White wire from Ignition switch to ECM (code 19)
 Back to top
View user's profile Send private message You must be logged in to rate posts

flabdog
L Plate Warrior



Joined: 07 Mar 2019
Karma :
PostPosted: 17:57 - 07 Mar 2019    Post subject: Reply with quote
Meatybeaty wrote:
Check Black/White wire from Ignition switch to ECM (code 19)

Looking for a break in the wire I take it ?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Meatybeaty
World Chat Champion



Joined: 10 Apr 2016
Karma :
PostPosted: 18:30 - 07 Mar 2019    Post subject: Reply with quote
flabdog wrote:
Meatybeaty wrote:
Check Black/White wire from Ignition switch to ECM (code 19)

Looking for a break in the wire I take it ?

Yes matey , betting on ignition end ,loose connection
 Back to top
View user's profile Send private message You must be logged in to rate posts

flabdog
L Plate Warrior



Joined: 07 Mar 2019
Karma :
PostPosted: 18:35 - 07 Mar 2019    Post subject: Reply with quote
Yes matey , betting on ignition end ,loose connection[/quote]
Thumbs Up thanks for that Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

flabdog
L Plate Warrior



Joined: 07 Mar 2019
Karma :
PostPosted: 19:30 - 08 Mar 2019    Post subject: Reply with quote
Yes matey , betting on ignition end ,loose connection[/quote]
Checked all connections and all seems fine. Fitted a new barrel and now it powers up but shows no neutral light on the dash and is dead when the starter button is pressed.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :
PostPosted: 22:23 - 08 Mar 2019    Post subject: Reply with quote
So you are following the 'randomly replacing bits to see if it works' method of diagnosis.

Can I suggest that you replace the fairings on my bike next in the hopes it fixes yours?
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Triumph Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

jaffa90
World Chat Champion



Joined: 06 Apr 2016
Karma :
PostPosted: 23:29 - 08 Mar 2019    Post subject: Reply with quote
"""Checked all connections and all seems fine."""
How are you doing this?
I suggest you get a multi/meter to test the original switch and connection to the fuse box when switching on with the battery disconnected so not to upset the brain. (e.c.u.)
Q, has somebody tried to steal this bike at any time?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Meatybeaty
World Chat Champion



Joined: 10 Apr 2016
Karma :
PostPosted: 08:20 - 09 Mar 2019    Post subject: Reply with quote
Take the Light blue wire off the Neutral switch and earth it , check that the neutral light comes on
 Back to top
View user's profile Send private message You must be logged in to rate posts

flabdog
L Plate Warrior



Joined: 07 Mar 2019
Karma :
PostPosted: 18:38 - 09 Mar 2019    Post subject: Reply with quote
Nobby the Bastard wrote:
So you are following the 'randomly replacing bits to see if it works' method of diagnosis.

Can I suggest that you replace the fairings on my bike next in the hopes it fixes yours?

As a newbie thought id try the barrel as a lot of other forum posters have done the same with success. Wont bother changing any farings ill just follow sensible and helpful advice ta. Theres always one Neutral
 Back to top
View user's profile Send private message You must be logged in to rate posts

flabdog
L Plate Warrior



Joined: 07 Mar 2019
Karma :
PostPosted: 18:40 - 09 Mar 2019    Post subject: Reply with quote
jaffa90 wrote:
"""Checked all connections and all seems fine."""
How are you doing this?
I suggest you get a multi/meter to test the original switch and connection to the fuse box when switching on with the battery disconnected so not to upset the brain. (e.c.u.)
Q, has somebody tried to steal this bike at any time?

As far as I know there has been no attempted theft of the bike previously. Thanks for the advice though Ill get me multimeter out Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

flabdog
L Plate Warrior



Joined: 07 Mar 2019
Karma :
PostPosted: 18:40 - 09 Mar 2019    Post subject: Reply with quote
Meatybeaty wrote:
Take the Light blue wire off the Neutral switch and earth it , check that the neutral light comes on

Will do that. Thanks again Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

Sparky700
Derestricted Danger



Joined: 13 Mar 2019
Karma :
PostPosted: 20:43 - 20 Mar 2019    Post subject: Reply with quote
flabdog wrote:
Meatybeaty wrote:
Take the Light blue wire off the Neutral switch and earth it , check that the neutral light comes on

Will do that. Thanks again Thumbs Up

I'm thinking of forming an emotional support group called code 19!
With code 19 it will turn over but not spark
I too have had the neutral light on and then off. It looks like once the ecu gets code 19 in it's head then bugger all will change it's mind
 Back to top
View user's profile Send private message You must be logged in to rate posts

Sparky700
Derestricted Danger



Joined: 13 Mar 2019
Karma :
PostPosted: 20:33 - 08 Jun 2019    Post subject: Reply with quote
flabdog wrote:
Meatybeaty wrote:
Take the Light blue wire off the Neutral switch and earth it , check that the neutral light comes on

Will do that. Thanks again Thumbs Up

Did you sort, mines still not sparking!
 Back to top
View user's profile Send private message You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :
PostPosted: 15:56 - 09 Jun 2019    Post subject: Reply with quote
We seem to get a lot of that error 19

https://www.bikechatforums.com/viewtopic.php?t=327690
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 6 years, 226 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.26 - MySQL Queries: 13 - Page Size: 81.31 Kb