Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


ZX-6R - What calipers?

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

McJamweasel
BCF Junkie



Joined: 22 Mar 2002
Karma :

PostPosted: 21:44 - 26 Mar 2005    Post subject: ZX-6R - What calipers? Reply with quote

My front calipers are buggered on my '01 ZX-6R J2, rather than get the rebuild kit it should be cheaper and easier to just buy some other calipers.

I know that the same Tokico 6 pots were used on other bikes - but which ones?
____________________
BCF: Be yourself, just don't be an arse.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Guest
Brolly Dolly



Joined: 22 Apr 2004
Karma :

PostPosted: 22:09 - 26 Mar 2005    Post subject: Reply with quote

Before I fitted Busa 6 potters to my RF I measured up a set on a ZXR7 and they were the same offset and bolt centres, so pretty much any Suzi or Kawa 6 potters should fit I reckon.


However, what's to say that the next set of calipers you get - presumably second-hand and off e-bay or similar - won't need a rebuild when you get them? Might as well just stump up for a new set of seals for the ones you've got.
 Back to top
View user's profile Send private message You must be logged in to rate posts

zaknafien




Joined: 25 Mar 2002
Karma :

PostPosted: 12:30 - 27 Mar 2005    Post subject: Re: ZX-6R - What calipers? Reply with quote

McJamweasel wrote:
My front calipers are buggered on my '01 ZX-6R J2, rather than get the rebuild kit it should be cheaper and easier to just buy some other calipers.


Front and back had siezed on the cat and I was sent to a breakers. Got some decent condition calipers from another cat for £100.
____________________
02 Firestorm.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

iCraig
World Chat Champion



Joined: 05 Jun 2004
Karma :

PostPosted: 13:13 - 27 Mar 2005    Post subject: Reply with quote

Gotta agree with Guest here, it maybe cheaper in the long run to buy a rebuild kit, after all new seals and pistons don't cost much at all, and atleast you'll know they'll be good for a few thousand miles too.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 15:01 - 27 Mar 2005    Post subject: Reply with quote

CraigZZR wrote:
after all new seals and pistons don't cost much at all, and atleast you'll know they'll be good for a few thousand miles too.


Best part of £100 for the seals alone. Add a few pistons to that and you are looking at a very large bill.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Guest
Brolly Dolly



Joined: 22 Apr 2004
Karma :

PostPosted: 16:00 - 27 Mar 2005    Post subject: Reply with quote

Say your calipers are crook - it'll cost you £100 to do them up


You buy some s/h calipers for £60 - they're crook also. Add another £100 ............ Sick


I have heard stories that Kawasaki charge a lot less than Suzuki for the same seals - anyone got any recent prices?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 16:30 - 27 Mar 2005    Post subject: Reply with quote

Hi

Should be less than £60 for 2nd hand calipers with a bit of waiting.

New seals for a GPZ500S front caliper were £3.35 + £3.65 + £3.35 + £3.93 = £14.28, plus VAT so £16.78, and that is for a single basic 2 piston sliding caliper (prices from yesterday). The ZX6R will need 6 times as many seals. If say half the pistons need replacing then that is probably at least another £60.

Advantage of a set of 2nd hand calipers is that even if they do not last long you have a spare set to repair at your leisure, or you can salvage the best pistons from each caliper and have not cost yourself anything extra.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

DynaMight
World Chat Champion



Joined: 27 Oct 2004
Karma :

PostPosted: 22:19 - 27 Mar 2005    Post subject: Reply with quote

GSXR750 94/95 used identical calipers
____________________
My bikes are at https://www.bikepics.com/members/dynamight/
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 21 years, 183 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.10 Sec - Server Load: 0.77 - MySQL Queries: 13 - Page Size: 57.48 Kb