Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Wheel building spoke Q

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

A100man
World Chat Champion



Joined: 19 Aug 2013
Karma :
PostPosted: 17:01 - 28 Jun 2020    Post subject: Wheel building spoke Q Reply with quote
Starting my wheel build and I note all the spokes I have are 'inners' to the hub and have 'J bend of less than 90 degs' but half must be 'outers' and so need to havea bend of greater that 90 degs. Can I bend them to required angle 'cold' do you think?
____________________
Now: A100, GT250A, XJ598, FZ750

Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts

MCN
Super Spammer



Joined: 22 Jul 2015
Karma :
PostPosted: 19:08 - 28 Jun 2020    Post subject: Reply with quote
Step away from the Wheel Jig.

😮

🤣
____________________
Disclaimer: The comments above may be predicted text and not necessarily the opinion of MCN.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Easy-X
Super Spammer



Joined: 08 Mar 2019
Karma :
PostPosted: 22:16 - 28 Jun 2020    Post subject: Reply with quote
Eeek!

https://i.imgflip.com/46mvld.jpg

Um, where did you get these spokes from? What did you actually ask for?
____________________
Royal Enfield Continental GT 535, Husqvarna Vitpilen 401, Yamaha XSR700, Honda Rebel, Yamaha DT175, Suzuki SV650 (loan) Fazer 600, Keeway Superlight 125, 50cc turd scooter
 Back to top
View user's profile Send private message You must be logged in to rate posts

A100man
World Chat Champion



Joined: 19 Aug 2013
Karma :
PostPosted: 22:17 - 28 Jun 2020    Post subject: Reply with quote
MCN wrote:
Step away from the Wheel Jig.

😮

🤣


No sense of adventure some people Rolling Eyes
____________________
Now: A100, GT250A, XJ598, FZ750

Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts

Riejufixing
World Chat Champion



Joined: 24 Jun 2018
Karma :
PostPosted: 22:34 - 28 Jun 2020    Post subject: Reply with quote
Won't they just pull up under tension? They are the proper job for your hubs, aren't they? I've only ever done two wheels, and that was ages ago.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Easy-X
Super Spammer



Joined: 08 Mar 2019
Karma :
PostPosted: 09:24 - 29 Jun 2020    Post subject: Reply with quote
Riejufixing wrote:
Won't they just pull up under tension? They are the proper job for your hubs, aren't they? I've only ever done two wheels, and that was ages ago.


Depends on the hub material but if it's soft alloy vs. steel spokes probably wouldn't be a great idea.

I'd compare to the original spokes (if you still have some) and get the right ones if they don't match.
____________________
Royal Enfield Continental GT 535, Husqvarna Vitpilen 401, Yamaha XSR700, Honda Rebel, Yamaha DT175, Suzuki SV650 (loan) Fazer 600, Keeway Superlight 125, 50cc turd scooter
 Back to top
View user's profile Send private message You must be logged in to rate posts

A100man
World Chat Champion



Joined: 19 Aug 2013
Karma :
PostPosted: 09:27 - 29 Jun 2020    Post subject: Reply with quote
Riejufixing wrote:
They are the proper job for your hubs, aren't they? I've only ever done two wheels, and that was ages ago.


Well, half of them are.. I just bought a job lot of correct length spokes without thinking/realising Embarassed - I only built push-bike wheels in the past where that bend is not (nearly so) critical.

Worst case I will junk/sell on the ones I don't need and get the correct ones. Live and learn, got to challenge ones-self right?
____________________
Now: A100, GT250A, XJ598, FZ750

Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts

Riejufixing
World Chat Champion



Joined: 24 Jun 2018
Karma :
PostPosted: 10:06 - 29 Jun 2020    Post subject: Reply with quote
Easy-X wrote:
Riejufixing wrote:
Won't they just pull up under tension? They are the proper job for your hubs, aren't they? I've only ever done two wheels, and that was ages ago.


Depends on the hub material but if it's soft alloy vs. steel spokes probably wouldn't be a great idea

I don't know of anything with a steel hub. Old harley things?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Riejufixing
World Chat Champion



Joined: 24 Jun 2018
Karma :
PostPosted: 10:22 - 29 Jun 2020    Post subject: Reply with quote
A100man wrote:
Worst case I will junk/sell on the ones I don't need and get the correct ones. Live and learn, got to challenge ones-self right?

I think I'd do that. Not sure how they bend the spokes, I'd guess the wnd's held in something abd it's knocked over, cold, but it might be a one-time operation. Perhaps someone here does know? Can't see harm in experimenting, but whether I'd use them is another matter.
 Back to top
View user's profile Send private message You must be logged in to rate posts

A100man
World Chat Champion



Joined: 19 Aug 2013
Karma :
PostPosted: 21:43 - 29 Jun 2020    Post subject: Reply with quote
Riejufixing wrote:
Can't see harm in experimenting, but whether I'd use them is another matter.


Found this.. might be worth a try..

https://www.classicbike.co.uk/ricks-fixes/bend-spokes-to-the-right-angle
____________________
Now: A100, GT250A, XJ598, FZ750

Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :
PostPosted: 21:50 - 29 Jun 2020    Post subject: Reply with quote
Spokes?
So old fashioned
Just stick some lovely lovely Comstar wheels on it
they is bootiful
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts

Riejufixing
World Chat Champion



Joined: 24 Jun 2018
Karma :
PostPosted: 22:14 - 29 Jun 2020    Post subject: Reply with quote
A100man wrote:
Found this.. might be worth a try..

https://www.classicbike.co.uk/ricks-fixes/bend-spokes-to-the-right-angle

Mmm. Dunno. He's bending it further, is that what you need to do, or the opposite? It looks neat, but it his hole's too small, he might find his spoke won't come out (I guess he could always radius one side of the hole, and turn the spoke around after bending, like the hand on a clock so it would come out). How much do you need to bend it?
 Back to top
View user's profile Send private message You must be logged in to rate posts

A100man
World Chat Champion



Joined: 19 Aug 2013
Karma :
PostPosted: 22:17 - 29 Jun 2020    Post subject: Reply with quote
WD Forte wrote:
Spokes?
So old fashioned
Just stick some lovely lovely Comstar wheels on it
they is bootiful


Good plan - should be able to swap my left-over spokes for a matching pair!
____________________
Now: A100, GT250A, XJ598, FZ750

Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 5 years, 182 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.09 Sec - Server Load: 0.51 - MySQL Queries: 13 - Page Size: 77.09 Kb