Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Thunderace fork rebuild

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

to v or not to v
World Chat Champion



Joined: 24 Nov 2020
Karma :

PostPosted: 19:14 - 11 Jun 2023    Post subject: Thunderace fork rebuild Reply with quote

one of the oil seals has a slight leak so i thought if i replace them id just as well do the springs, one of which had reached its service limit last time i checked.
YSS and Hagon springs are what i found when searching. is one better than the other? similar in price.
also am i likely to need new bushes, if so, is it worth forking out for genuine Yamaha or will generic bushes which are near half the price be ok?
____________________
current bike Yamaha Thunderace.
Moto Guzzi V7.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 20:58 - 11 Jun 2023    Post subject: Reply with quote

My experience is OEM bushes and seals or do it again in 12 months.

Again my experience is that getting the correct weight linear spring for your weight and riding style is better than a progressive or straight OEM replacement. To the extent you suddenly notice how badly your brakes and rear shock are set up.

So plug your details into the racetec spring calculator and it'll tell you what strength spring to use, what spacer and what fluid and air gap. Do that, set the sag and be amazed.
https://racetech.com/ProductSearch/12/Yamaha/YZF1000/1997

I fitted K-techs to my VFR last time, they are fine.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

to v or not to v
World Chat Champion



Joined: 24 Nov 2020
Karma :

PostPosted: 22:13 - 11 Jun 2023    Post subject: Reply with quote

looked at recommended YSS spring specs and the length is 282mm

stock spring is 297mm for the 96 year model (mine) and 287mm for 97 on.

is that correct and will it be just a straight swap?
____________________
current bike Yamaha Thunderace.
Moto Guzzi V7.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 22:50 - 11 Jun 2023    Post subject: Reply with quote

CMSNL lists all years of thunderace as having the same part number.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

to v or not to v
World Chat Champion



Joined: 24 Nov 2020
Karma :

PostPosted: 13:19 - 12 Jun 2023    Post subject: Reply with quote

will a spring thats 15/5mm shorter than stock work as intended?
____________________
current bike Yamaha Thunderace.
Moto Guzzi V7.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 17:40 - 12 Jun 2023    Post subject: Reply with quote

to v or not to v wrote:
will a spring thats 15/5mm shorter than stock work as intended?


If it's the correct spring rate, then yes, providing you set the sag which you should do anyway. You may need a longer spacer if the preload adjuster can't be adjusted far enough. Blue alkethene water pipe makes acceptable spacers.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 2 years, 197 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 0.82 - MySQL Queries: 15 - Page Size: 49.1 Kb