Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Vacuum gauge blunder

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

A100man
World Chat Champion



Joined: 19 Aug 2013
Karma :

PostPosted: 13:45 - 07 Jul 2023    Post subject: Vacuum gauge blunder Reply with quote

Lent out (or lost) my previous 4 gauge set..

bought a cheap replacement set that looks ok.. BUT
the set came without the critical damper valves (white in pic)

https://m.media-amazon.com/images/I/51i++Uho-KL.jpg

Have complained to seller but in case of no result any idea where I could buy some?
____________________
Now: A100, GT250A, XJ598, FZ750

Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts

Fat Angry Scotsman
World Chat Champion



Joined: 12 Jan 2021
Karma :

PostPosted: 14:38 - 07 Jul 2023    Post subject: Reply with quote

https://www.demon-tweeks.com/bike-it-economy-vacuum-gauges-241350/?sku=BIKVGA6&istCompanyId=a2904180-3a7d-4e56-b876-cf81c9512180&istFeedId=6fbc4b04-fd28-4ce1-8513-835c8f118690&istItemId=wptiraalr&istBid=t&gclid=Cj0KCQjw756lBhDMARIsAEI0Agl6bzeno6DDlxt_-YPhwVF0_zJGvqxCXzNn43zEa1TERs_vdEUUheQaAhJnEALw_wcB&gclsrc=aw.ds

£8.33
____________________
PRESENT: 2018 BMW S1000XR SE Sport.
PAST: 2009 Kawasaki ER-6F. 2021 Zontes ZT-125U.
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 18:00 - 07 Jul 2023    Post subject: Reply with quote

You can kink over the hoses in a loop of a cable tie. Tighten the kink until sufficient damping is achieved.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

to v or not to v
World Chat Champion



Joined: 24 Nov 2020
Karma :

PostPosted: 18:20 - 07 Jul 2023    Post subject: Reply with quote

i bought a cheap set of these type gauges. found them too inaccurate so got mercury ones instead for much more expense Neutral

you can have mine if you like?
____________________
current bike Yamaha Thunderace.
Moto Guzzi V7.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 18:26 - 07 Jul 2023    Post subject: Reply with quote

Those gauges are "OK" if you accept them for what they are - cheap and cheerful.

The feedback shows that a common complaint is the needles not being zeroed equally. This is easily remedied - just pop the front cover off and use a flat screwdriver on the one screw to adjust the needle to zero.

I checked my set by putting tee pieces between the gauges and applying the same vacuum to each of them, and they were actually very close.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 18:08 - 13 Jul 2023    Post subject: Re: Vacuum gauge blunder Reply with quote

A100man wrote:
the set came without the critical damper valves (white in pic)


Fish tank airline taps do the same job. Clicky.
 Back to top
View user's profile Send private message You must be logged in to rate posts

A100man
World Chat Champion



Joined: 19 Aug 2013
Karma :

PostPosted: 10:20 - 14 Jul 2023    Post subject: Re: Vacuum gauge blunder Reply with quote

sickpup wrote:
A100man wrote:
the set came without the critical damper valves (white in pic)


Fish tank airline taps do the same job. Clicky.


Nice one thanks.. As it turns out the seller came up trumps and delivered a complete new set.. but these can/could go wit the old one
____________________
Now: A100, GT250A, XJ598, FZ750

Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 11:24 - 14 Jul 2023    Post subject: Reply with quote

stinkwheel wrote:
You can kink over the hoses in a loop of a cable tie. Tighten the kink until sufficient damping is achieved.


This.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 2 years, 185 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.96 - MySQL Queries: 13 - Page Size: 58.82 Kb