Motrax indy fitment

[Bandito]

Hi all..
got some of those Micro Arrow indicators for my 600rr today..
have been reading up and people are saying that indicators are a pain to fit as you need to solder and do this that and t'other... but I thought from the look of them that they look like its a case of removing the old and popping the new in and plugging the wiring in The wires coming off the indicators ahve a metal 'socket' type thing.... do I need to solder anything?
any helpful advice appreciated

[Gazdaman]

If they plug in, then plug them in.

The connects that come on them are 'bullet' type connectors. They've plopped straight onto both bikes I've tried them with.

Gaz

[dave1rs]

just fit new connectors that match the rr ones,only a couple of quid,and they plug in.....or cut off both sets of plugs and join the wires,solder them together and cover with heatshrink tubing....id go the new connector route.

[Project9928]

Its just a case of going down halfords and getting male and female electrical connectors. But I was told that there are ready made connectors that you can buy for Mortrax indicators, that was after I butchered the original indicators to get the connector