Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Power valve HELP!! RS 125

Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

steve8137
Two Stroke Sniffer



Joined: 21 May 2005
Karma :

PostPosted: 18:09 - 07 Jun 2005    Post subject: Power valve HELP!! RS 125 Reply with quote

Hi, i have a restricted Aprilia RS 125 and have decided to check for a power valve, i found it. So therefore came to the conclusion that it must be clogged up and dirty because the wires are connected.

Can anyone tell me how to clean it please? And im guessing it needs to be removed to be cleaned, if so how do i take it out because the battery is in the way!!

Cheers
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Andy C
Tree Seeking Missile



Joined: 26 Apr 2005
Karma :

PostPosted: 18:13 - 07 Jun 2005    Post subject: Reply with quote

heres a site that may help but mine can detricticted and never cleaned it, btw posting 3 times isnt going to get an more replys! Mad lol, how fast it go at the mo?
https://www.navero.co.uk/rs125zone/tuning.htm
____________________
99 RS125 --> 02 SV650s --> 03 Speed Four --> 92 RXS100 --> 93 CB400sf --> 01 CB600f Hornet
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

dransy
World Chat Champion



Joined: 04 May 2005
Karma :

PostPosted: 18:17 - 07 Jun 2005    Post subject: Reply with quote

take out your battery and the holder then follow the rave cabel to the powervalve
undo the 2 srews at the sides which hold it in place,
take it out and clean it , u can just use a cloth i also filed my down just to get it extra clean and when u put it back in make sure its the right way Razz
____________________
Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 18:33 - 07 Jun 2005    Post subject: Reply with quote

Hi

It is possible to get in out without taking out the battery, etc, but if it is seized up then it will be a pig to get out and removing the battery holder, etc, will make the job easier.

Undo the 2 bolts holding it in place and it should pull out easily. In reality it will take ages of pulling it out a bit, and then pushing it back in repeatedly.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

steve8137
Two Stroke Sniffer



Joined: 21 May 2005
Karma :

PostPosted: 19:27 - 07 Jun 2005    Post subject: Reply with quote

Ok, i have taken the battery and the battery holder out and undone the two screws. Now i have the valve still connected at both ends. Do i have to disconnect it now, if so how? Once i have done that, how do i clean it? Cheers
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Lee_367
Brolly Dolly



Joined: 22 May 2004
Karma :

PostPosted: 21:46 - 07 Jun 2005    Post subject: Reply with quote

https://www.125ccsportsbikes.com/forums//index.php?showtopic=5822
Plenty of information about it in there, click on the top picture for a larger one. Smile
____________________
?It?s mercy, compassion, and forgiveness I lack?not rationality.?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

ash t
World Chat Champion



Joined: 16 Dec 2004
Karma :

PostPosted: 21:48 - 07 Jun 2005    Post subject: Reply with quote

THERES also a thread on this very forum which is near the top of the pile Laughing
____________________
When You're Starting To Choke, Take Some Pills With Your Coke, Its Hyserical
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 21 years, 92 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.56 - MySQL Queries: 13 - Page Size: 53.63 Kb