Changing clutch lever...

[trevoriv]

Just changed the clutch lever on my thundercat and now the bike wont start whilst in gear any ideas why?

[White Noise]

probibly something to do with the safety system that stops you from starting the bike while its in gear. is there a switch near the clutch lever that you may have disturbed?
WN
____________________
Buy my wife: 96' Yam XJ600s (Diversion)
Wing Commander White Noise - SE Clique
Riding Tip #86: See God, then back off a bit: Problem is i haven't seen god yet, just a close up of tarmac on revett straight

[trevoriv]

there is a cable that plugs into the clutch lever housing which is plugged back in ok but i will have a look make sure its in properly.

starts in neautral ok :/

[Kickstart]

Hi

On the Bandit the switch pokes into the lever, so if you just unbolt the lever and pull it out then you snap the tag off the switch.

Suspect it might be the same on the Thundercat.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[trevoriv]

thanks for ur help guys, sorted the problem but went out on the bike and my throttle stuck open RIP Thundercat RIP

[White Noise]