Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


What size compressor

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

AJ
Nitrous Nuisance



Joined: 12 Aug 2006
Karma :
PostPosted: 00:43 - 26 Nov 2007    Post subject: What size compressor Reply with quote
Hi all just wondering what size compressor is needed to seat the beads on the rims. Ie tank size maximum psi etc.
I dont want to buy a huge industrial one if it's not needed. All input is greatly appreciated thanks AJ
 Back to top
View user's profile Send private message You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :
PostPosted: 00:57 - 26 Nov 2007    Post subject: Re: What size compressor Reply with quote
25 litres should be ok and be a reasonable size. Much smaller and it's either not that powerful or the compressor bit is just as big anyway.

Most 25 litres ones I've seen have been a fairly similar spec.
 Back to top
View user's profile Send private message You must be logged in to rate posts

AJ
Nitrous Nuisance



Joined: 12 Aug 2006
Karma :
PostPosted: 15:43 - 26 Nov 2007    Post subject: Reply with quote
Thank's 4 that G appreciate it. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

tatters
Exxon Valdez



Joined: 05 Jan 2004
Karma :
PostPosted: 16:18 - 26 Nov 2007    Post subject: Reply with quote
its not size that counts when seating the bead you need pressure make sure its got a max pressure of at lest 140-150 psi
____________________
Past:NRG50,AF1125(x2),NSR125RR,ZZR250,CX500,VFR400,KR1S,ZZR600(x2),CB400N,YZF1000(x2),KH125,Z200,FX400R,CBR954RR(x2)GPZ500S,GT550,VFR750F(x2),RD350N,XR650R,CBR600F,CB250,KDX250,YZF750R,CRM250,400EXC,KLR650,TTR600RE,DR350S,R100GSPD,RGV250,VMAX1200,DL650,KZ750 Present:G650XC,C12,CRF450X,1190ADV
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Jamie S
World Chat Champion



Joined: 28 Dec 2006
Karma :
PostPosted: 19:17 - 26 Nov 2007    Post subject: Reply with quote
25 Ltr's will get a tubeless tyre back on the rim easily ,having large bore Air hoses helps as well.

Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :
PostPosted: 19:27 - 26 Nov 2007    Post subject: Reply with quote
jamie stokes wrote:
25 Ltr's will get a tubeless tyre back on the rim easily ,having large bore Air hoses helps as well.


And connectors

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Ichy
World Chat Champion



Joined: 15 Jul 2005
Karma :
PostPosted: 20:19 - 26 Nov 2007    Post subject: Reply with quote
tatters wrote:
its not size that counts when seating the bead you need pressure make sure its got a max pressure of at lest 140-150 psi


Not 100% true, you can get a low volume compressor that will get 150psi but will take all day to do it whereas a 2hp 50ltr hobby compressor will have a maximum working pressure of about 110-120psi but will sit the bead in no time. Size (volume) is very important, seating a bead wastes a lot of air, theres no point if you run out of in seconds. Its CFM that counts.

6CFM on a 25 litre tank, about 1.5 HP motor, just about did it on a 130/90 tyre with a bit of coaxing.
8-9CFM with a 50 litre tank, at least 2hp motor, does it easy.
 Back to top
View user's profile Send private message You must be logged in to rate posts

AJ
Nitrous Nuisance



Joined: 12 Aug 2006
Karma :
PostPosted: 00:14 - 28 Nov 2007    Post subject: Reply with quote
Oh well I've gone and bought one now so hopefully it will do the job. Maximum tyre size I got to contend with is 150/70 17

The compressor is a 24 litre 1.5 kw 8bar 208 litres a minute

roughly coverted to Ichy's figures at 2hp motor max 117psi with a approx 7.4 cfm.

Did not cost a fortune just hope it seats the beads.

Thanks for all the input AJ Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ichy
World Chat Champion



Joined: 15 Jul 2005
Karma :
PostPosted: 12:03 - 28 Nov 2007    Post subject: Reply with quote
It should do it easy. The hardest bit is sealing any gaps, bit hard to explain but I find that sitting on the tyre to make it spread helps when I have a awkward one.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Phil_P
Trackday Trickster



Joined: 10 Nov 2007
Karma :
PostPosted: 14:45 - 28 Nov 2007    Post subject: Reply with quote
A ratchet strap all the way around the tread of the tyre can be used to squeeze the tyre to get an initial seal before blowing air in. When you are trying to initially seat a tyre, it is an idea to leave the valve out the wheel too, as getting air in quickly is important, at least it is on a tubeless.
____________________
It is not enough to win, others must fail.
Moto Guzzi 1100 Sport Injection '96
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 18 years, 312 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 0.95 - MySQL Queries: 14 - Page Size: 63.28 Kb