Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


rxs oil pump

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

piercedbiker6...
L Plate Warrior



Joined: 15 Aug 2008
Karma :
PostPosted: 16:35 - 15 Aug 2008    Post subject: rxs oil pump Reply with quote
My girlfriend has an rxs 100. It seems to smoke alot & only does about 50mph. Does anybody know how to adjust the oil for the two stroke oil delivery system. Thanx in advance, Mick.
____________________
Flat out or not out.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

The_One
Two Stroke Sniffer



Joined: 15 Jul 2008
Karma :
PostPosted: 20:44 - 15 Aug 2008    Post subject: Reply with quote
Get a new pump, or do as my mate did and fix it with a pencil and elastic band Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

ms51ves3
Super Spammer



Joined: 07 Jun 2007
Karma :
PostPosted: 21:50 - 15 Aug 2008    Post subject: Reply with quote
The_One wrote:
Get a new pump, or do as my mate did and fix it with a pencil and elastic band Thumbs Up


That's some shit advice Rolling Eyes

First find out how much oil it is using, my oil light comes on after 750ml of oil has been used then work out how much it is using to a litre.

When I first got my RX-S my bike would do 160 miles to a litre, now it's around 400 miles.

What you have to do is take off the cover on the right hand engine casing with 3 screws on it, in there is the oil pump.

Take the nut off, spring washer, adjuster plate and then the shims. Removing shims reduces oil flow Thumbs Up Remove maybe 1 or a couple for now and see how it goes, if it's still drinking loads of oil remove some more.

Watch out though, the shims are only supposed to be 0.1mm but in mine I had washers upto 0.7mm.

I think your 50mph problem will be something else other than the oil pump though.
 Back to top
View user's profile Send private message You must be logged in to rate posts

The_One
Two Stroke Sniffer



Joined: 15 Jul 2008
Karma :
PostPosted: 22:07 - 15 Aug 2008    Post subject: Reply with quote
ms51ves3 wrote:
The_One wrote:
Get a new pump, or do as my mate did and fix it with a pencil and elastic band Thumbs Up


That's some shit advice Rolling Eyes

First find out how much oil it is using, my oil light comes on after 750ml of oil has been used then work out how much it is using to a litre.

When I first got my RX-S my bike would do 160 miles to a litre, now it's around 400 miles.

What you have to do is take off the cover on the right hand engine casing with 3 screws on it, in there is the oil pump.

Take the nut off, spring washer, adjuster plate and then the shims. Removing shims reduces oil flow Thumbs Up Remove maybe 1 or a couple for now and see how it goes, if it's still drinking loads of oil remove some more.

Watch out though, the shims are only supposed to be 0.1mm but in mine I had washers upto 0.7mm.

I think your 50mph problem will be something else other than the oil pump though.


Sorry your holiness, I was just saying what I would do.
No need to criticize.
 Back to top
View user's profile Send private message You must be logged in to rate posts

MaybeGuy
Super Spammer



Joined: 12 Mar 2007
Karma :
PostPosted: 01:44 - 16 Aug 2008    Post subject: Reply with quote
that was shit advice.
if its smoking, its not the oil pump thats at fault is it. Rolling Eyes so why replace it?

''omg my bike haz run owt of teh fuel!! i need a new bikez''!

same sort of thing.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!! Mr. Green
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pretendra
Derestricted Danger



Joined: 10 Aug 2008
Karma :
PostPosted: 04:22 - 20 Aug 2008    Post subject: Reply with quote
Have you tried adjusting the travel of your pump.
As far as i know, a standard way of adjusting the pump is to coincide the mark on the cable pully with the pully guide screw.
Good luck buddy... Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Pretendra
Derestricted Danger



Joined: 10 Aug 2008
Karma :
PostPosted: 04:30 - 20 Aug 2008    Post subject: Reply with quote
Have you tried adjusting the travel of your pump.
As far as i know, a standard way of adjusting the pump is to coincide the mark on the cable pully with the pully guide screw.
Good luck buddy... Smile
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Blau Zedong This post is not being displayed because the poster is banned. Unhide this post / all posts.
Old Thread Alert!

The last post was made 17 years, 128 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.05 Sec - Server Load: 0.73 - MySQL Queries: 14 - Page Size: 58.46 Kb