Dodgy lock?

[Jamrock]

I have found it increasingly hard to start my bike because of my lock. It takes me 5 - 10 minutes of going up and down with they key until it 'clicks' into the right spot and the key turns. Is there anything I can do or does it look like a new lock jobby?

[UkBikeGear]

sounds like either your ignition or key are really worn and in need of replacement, but try putting the key in and tilting it back slightly as you turn, might save a bit of time in the mornings!
____________________
motorcycle clothing online at www.ukbikegear.com... we're here to serve!

[McJamweasel]

What bike is it? Suzuki ignition locks wear pretty easily, but there is a knack to getting them to turn. Simply push the key forwards slightly as you turn and it will go easily.
____________________
BCF: Be yourself, just don't be an arse.

[Kris]

[neil.]

On my YBR a squirt of WD40 in the barrel helps with this sort of issue. Not sure how well it would work on other bikes.
____________________
CBT February 2008 | A2 June 2008 | Yamaha YBR125 (written off) | Honda CBF125 (current)

[ZaphodBeeble]

My Firestorm does this every few months. I squirt a bit of brake cleaner into the barrel first then I spray some good old WD40 when it's dried out. The brake cleaner gets rid of any filth and the WD lubes the tumblers.

Put the key in and work it all around for a bit until the motion is smooth.
____________________
Current bike: VTR1000F Firestorm. Previous: Firestorm (written off) - XJ600 Divvy - NSR125 - DT125 and a load of offroaders.

[Syx]

Useful info guys, my key is just starting to get this way so I might give it a go before it gets worse!