Aprilia rs 125 clutch problem !

[reality29]

Hi everyone ! I have an Aprilia rs 125 2005 and half year ago the clutch started to slip when i tried to accelerate fast at high revs. In the beginning, the slipping was small and after a week or two it became hard to ride. Now I bought new (original ROTAX) Friction Clutch Plates, Steel Plates, a Set Of Heavy Duty Springs and gearbox oil. I changed everything according to the rotax engine repair manual and everything seemed to be fine until I drove it... I can't believe even now, after changing everything - no effect ! The clutch slips as before. Please, maybe someone could help me !

[Kickstart]

Hi

Have you adjusted the clutch? There is an adjuster in the middle of the clutch cover.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[reality29]

Yeah, I have tried to adjust with both, the screw and the lever but nothing

[stirlinggaz]

which gear oil are you using?
& have you tried changing the clutch cable?
cheers,
GAZ

[reality29]

Gearbox oil 75W80 full synthetic. The clutch cable is almost broken in one place (near the hand lever) but I don't know if this problem is because the cable or is it ?

[Kickstart]

[chris-red]

What did the old clutch plates looks like where they worn? I can;t imagine a RS125 living long enough to go through a Clutch TBH, I would get a new cable.
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.