Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Wheel Bearings on the way out?

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Wise1
World Chat Champion



Joined: 15 Aug 2008
Karma :
PostPosted: 19:22 - 04 Sep 2012    Post subject: Wheel Bearings on the way out? Reply with quote
Was coming home from work tonight on the 1250, felt as if I had a flat tyre at points, bit wobbly at the front end. Type pressure is fine and wheel seems fine when I put in the centre stand to check for movement.

Sign of the wheel bearings heading out?
____________________
Current - 2007 Suzuki Bandit GSF1250 - 1999 Suzuki TL1000R
Previous - GSXR750 SRAD, Fireblade, ZXR750, CBR600
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Matt-
World Chat Champion



Joined: 19 Jul 2012
Karma :
PostPosted: 19:36 - 04 Sep 2012    Post subject: Reply with quote
When you checked the wheel bearing, did you spin the wheel, and listen for any judders or any ruff spot's, also try and feel any play from side to side or down and up. may be a worn tyre ?
____________________
RIP jack (wheelie king), you will never be forgotten.
Current Bike's - Road Legal TZR 125 Pitbike, Aprilia SR50R 2010
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

Wise1
World Chat Champion



Joined: 15 Aug 2008
Karma :
PostPosted: 20:45 - 04 Sep 2012    Post subject: Reply with quote
Can't feel anything rough when it's spinning, does not seem to be any movement or hear anything, well I can but it's the pads against the disc, the pads are about 3/4 through, wonder if brakes could be binding.

I will order new pads and bearings just to be on the safe side.
____________________
Current - 2007 Suzuki Bandit GSF1250 - 1999 Suzuki TL1000R
Previous - GSXR750 SRAD, Fireblade, ZXR750, CBR600
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

el_oso
World Chat Champion



Joined: 17 May 2008
Karma :
PostPosted: 21:05 - 04 Sep 2012    Post subject: Reply with quote
have you checked the head race bearings are done up?
____________________
Duke 390
Previous: '05 XR125L | '96 XJ600S Diversion |'05 Suzuki GSXR1000 | '05 Honda CBR125-R | '97 YZF 600R Thundercat | '11 Honda CBR250
Car: Jeep Wrangler 4.0L
 Back to top
View user's profile Send private message You must be logged in to rate posts

Wise1
World Chat Champion



Joined: 15 Aug 2008
Karma :
PostPosted: 21:10 - 04 Sep 2012    Post subject: Reply with quote
the_godfather wrote:
have you checked the head race bearings are done up?


Yeah, checked them, definately coming from low down though. I remember I had issues with the head bearings on a bike before and this is not what I am feeling this time.
____________________
Current - 2007 Suzuki Bandit GSF1250 - 1999 Suzuki TL1000R
Previous - GSXR750 SRAD, Fireblade, ZXR750, CBR600
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Wise1
World Chat Champion



Joined: 15 Aug 2008
Karma :
PostPosted: 19:05 - 05 Sep 2012    Post subject: Reply with quote
Decided to take the wheel off and have a proper look. The bearings are spotless, the dust covers don't even have a scratch on them. No rough bits , smooth as I would expect to be honest.

The pads are a different story, about a year old, rusted to f**k, not cheap ones either. One of the pads on the left caliper required a lot of effort to remove, it was like it was glued in position, only to the caliper body though not the pistons.

I pushed the pistons back to make room for new pads and they appeared free and clean too.
____________________
Current - 2007 Suzuki Bandit GSF1250 - 1999 Suzuki TL1000R
Previous - GSXR750 SRAD, Fireblade, ZXR750, CBR600
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 14 years, 54 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 1.33 - MySQL Queries: 14 - Page Size: 53.2 Kb