|
|
| Author |
Message |
| _Iain_ |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 _Iain_ Banned

Joined: 01 Feb 2012 Karma :     
|
 Posted: 09:26 - 25 Feb 2014 Post subject: Would you buy this used engine? |
 |
|
https://i.imgur.com/Arhl45B.jpg
Engines popped up for sale at a reasonable price.
Have asked seller for details & he says it selects all gears, asked for him to send a decent photo of the condition of top end and he's sent this over.
Thought i'd ask for opinions before purchase - should fit my '96 frame, but only has a five speed box rather than the six speed that kersploded on my old engine.
I currently have a set of mains w/seals, a crank, a piston and two engine gasket sets, and a nice new clutch to go on this motor if I decided to go for it. ____________________ Please be aware that the above post may be full of complete nonsense.
Riding: '07 KTM Duke II, Baotian BT49QT-20 Driving: '88 Volvo 340 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| MarJay |
This post is not being displayed .
|
 MarJay But it's British!

Joined: 15 Sep 2003 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| _Iain_ |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 _Iain_ Banned

Joined: 01 Feb 2012 Karma :     
|
 Posted: 09:45 - 25 Feb 2014 Post subject: Re: Would you buy this used engine? |
 |
|
That's what I was worried about - however I'd be fully rebuilding both top and bottom end before running it. Mains, crank seals, crankshaft itself (which has a new conrod on it), little end bearing, piston, rings etc. Will also be changing over the clutch plates as I've got that DRC kit on the old engine with zero mileage on it.
It seems foolish to chance a massive engine failiure when I've already got the engine out of the bike and all the parts to sort it out. ____________________ Please be aware that the above post may be full of complete nonsense.
Riding: '07 KTM Duke II, Baotian BT49QT-20 Driving: '88 Volvo 340 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| skatefreak |
This post is not being displayed .
|
 skatefreak World Chat Champion

Joined: 06 Feb 2010 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Pete. |
This post is not being displayed .
|
 Pete. Super Spammer

Joined: 22 Aug 2006 Karma :     
|
 Posted: 18:41 - 25 Feb 2014 Post subject: |
 |
|
Piston has a granular appearance, which could be the samera but looks suspiciously like minor detonation damage. Looks like th episton has been picking up on the bore too. I reckon the cylinder could possibly be serviceable but the piston is most likely an iffy proposition for re-use. At the very least check the rings aren't tight in the grooves - another sure sign of detonation. ____________________ a.k.a 'Geri'
132.9mph off and walked away. Gear is good, gear is good, gear is very very good  |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Shaft |
This post is not being displayed .
|
 Shaft World Chat Champion

Joined: 27 Dec 2010 Karma :    
|
 Posted: 19:59 - 25 Feb 2014 Post subject: |
 |
|
I'm not understanding.
Why would you buy an engine with the wrong gearbox for your bike, knowing you will need to totally rebuild it?
You already have an engine that needs rebuilding, all you're doing is spunking money for nothing. ____________________ Things get better with age; I'm close to being magnificent........
20 RE Interceptor, 83 Z1100A3, 83 GS650 Katana
WooHoo, I'm a Man Point Millionaire! https://www.bikechatforums.com/viewtopic.php?t=234035 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| _Iain_ |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 _Iain_ Banned

Joined: 01 Feb 2012 Karma :     
|
 Posted: 09:30 - 26 Feb 2014 Post subject: |
 |
|
| Shaft wrote: | I'm not understanding.
Why would you buy an engine with the wrong gearbox for your bike, knowing you will need to totally rebuild it?
You already have an engine that needs rebuilding, all you're doing is spunking money for nothing. |
The bearings in the gearbox that were contaminated by the kersploded clutch need to be binned. They cost £450. There's also the head at £150, thats before we get into the two mullered gearbox cogs and knackered selector fork. This would give a full running engine with a known good gearbox & I can then just sling my engine rebuild parts I already have onto this motor to freshen it up, avoid the costly gearbox rebuild. The five speed CR box was fitted to all later CR125's and is interchangeable with the 6 speed. A lot of kart racers swap the five speed box out for a six speed CR125 box & it literally drops straight in.
Essentially we're assuming this new motor has a useable transmission and head, then rebuilding the known running engine for peace of mind.
My engine needs replacement of two gearbox cogs, a selector fork, a clutch basket, then the mains, crank, seals, piston, then a hone/rebore, then a new head, then £££.
I could then run my bike with the five speed transmission on the '98 engine and when it's due a bottom end spend the £150 the six speed box requires and sling that in it at the time. I then also have a huge box of engine spares, spare covers and such. So basicly, I save £300ish on the cost of a running motor & gain a spare engine for parts, hopefully saving downtime in the future.
What do you think? I'm 50/50 on it.
Lets be very clear - the engine will not be run. The engine will be stripped and refitted with new mains, crank, rod, little end, piston, and top end gasket set. It will be getting a full top and bottom end rebuild before even being run. The crank, piston, mains etc that are currently in it will be going in the bin.
Spoke to seller - has anyone had any kind of dealings with Two Wheel Mad on ebay before? ;
| _Iain_ wrote: | Hi,
Would it be possible to get some decent photo's of the condition of the bore/piston? I.e camera up exhaust port w/flash on just to highlight any scratches or damage?
Are you open to sensible offers on the engine?
Many thanks
Iain |
| TWM wrote: | hi,
we have had a look down the barrel and it looks pretty clean with not to much makings.
the only way it would be a little cheaper is to come and collect it in person.
regards TWM |
| _Iain_ wrote: |
Hi,
Sorry, would you be able to take some photo's? Due to cost of engine and no warranty I'd really need to see first hand. Your definition of "not too many marks" might mean completely slaughtered in someone elses eyes. Its such a highly strung engine & whilst it'd be getting a full rebuild anyway I cant justify spending £400 on an engine that then needs a rebore and a new cylinder head because it's been blown up!
Many thanks
Iain |
| TWM wrote: | pics with head off, now will require a head gasket too |
| _Iain_ wrote: |
Head gasket isn't a problem - would have to replace this anyway when rebuilding the motor prior to use. Have you got a photo showing the condition of the head? |
| TWM wrote: |
hi,
there was 2 pictures sent with the message yesterday as an attachment.
or look at the listing because they was added on there too.
regards |
| _Iain_ wrote: |
Hi,
Yes, I've seen those - very grateful, however as you've pulled the cylinder head off could you grab a photo of that? My previous engine had a mashed head on it that set me back £150 to replace. These engines are very sensitive to the shape of the combustion chamber. |
| TWM wrote: |
hi,
sorry but the engine is back together and put away now.
regards TWM |
| _Iain_ wrote: | Hi,
It is only a thirty second job to remove the head, takes less than fifteen minuites with it in the frame!
I'm a genuine buyer. If the head looks okay then I will be purchasing the engine, happy to purchase now if you'll agree to refund the cost of a replacement head should it turn out to be knackered when the engine arrives & gets pulled apart?
Many thanks
Iain |
| TWM wrote: |
hi,
i mite be a 30 second job in your eyes but we are a full running shop. staff who strip the bikes and another member of staff to take the pictures ect so its not 30 seconds. we have other jobs on and things we have to go in line and picking order. your not the only customer we have.
we have gone above & beyond what we normally do by taking the head off in the first place. its a used engine sold with no warranty as stated and suggest a full rebuild in the first place. no refunds will be made for any motocross items.
when we get time i will see about taking another picture but its in a list of jobs and maybe a few days..
regards TWM |
| _Iain_ wrote: | Hi,
Yes, I appreciate all of this. I work in the motorcycle trade myself, if it's a case of waiting a few days then it's not a problem.
A full rebuild will be carried out on the motor as suggested, however the cost of replacing the cylinder head if it's had detonation damage more than doubles the cost of the rebuild. The part is also NLA through honda so it's quite important that it's in useable condition. If the head is damaged (and they are very sensitive to damage) then the new engine is likely to detonate itself to bits very quickly, as the squish band tolerance is so small - then I've got all the aggro of trying to scource a useable head.
Iain. |
Now, am I just being a prick or is seller trying to cover up some massive head damage?
He replied with the photo's of the head off within about an hour of sending the message.  ____________________ Please be aware that the above post may be full of complete nonsense.
Riding: '07 KTM Duke II, Baotian BT49QT-20 Driving: '88 Volvo 340 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| P.addy |
This post is not being displayed .
|
 P.addy Red Rocket
Joined: 14 Feb 2008 Karma :  
|
 Posted: 10:07 - 26 Feb 2014 Post subject: |
 |
|
Turn up, view engine before handing over cash, spend the 30 secs whipping the head off
To be fair, I'd have given up when you asked me to strip the engine, even if its minor parts because I have other things to do rather than drag out an engine that has been sat in the garage for 6 months init. Business is business  |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Vincent |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 Vincent Banned

Joined: 16 Oct 2006 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| _Iain_ |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 _Iain_ Banned

Joined: 01 Feb 2012 Karma :     
|
 Posted: 12:53 - 26 Feb 2014 Post subject: |
 |
|
| Paddy. wrote: | Turn up, view engine before handing over cash, spend the 30 secs whipping the head off
To be fair, I'd have given up when you asked me to strip the engine, even if its minor parts because I have other things to do rather than drag out an engine that has been sat in the garage for 6 months init. Business is business  |
I'd not asked him to strip the engine, thats the thing. I simply asked him to stuff a camera up the exhaust port, he's the one that decided to pull the head off! If he's pulled the head off rather than that then why not grab a quick photo of the head whilst he's in there?
The guys a bike breakers - ebay powerseller and all that jazz, so his buisness is dealing with stripping bikes & such all day long. I've worked at a breakers before (albeit cars) and when asked daft ebay questions the boss would just send you out into the yard to find out, with major part removal jobs being put on a schedule. Just seems a little odd IMO that he's unable to pop the head off click with the camera and pop it back on the shelf again. Especially if he's got a team already stripping bikes with tools out and such - doesn't take much to go "Oi Dave, leggit upstairs and grab a pic of the CR head"
Engines in Manchester unfourtunately, so won't be going up there to pick it up. ____________________ Please be aware that the above post may be full of complete nonsense.
Riding: '07 KTM Duke II, Baotian BT49QT-20 Driving: '88 Volvo 340 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| stevo as b4 |
This post is not being displayed .
|
 stevo as b4 World Chat Champion
Joined: 17 Jul 2003 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| _Iain_ |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 _Iain_ Banned

Joined: 01 Feb 2012 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| P.addy |
This post is not being displayed .
|
 P.addy Red Rocket
Joined: 14 Feb 2008 Karma :  
|
 Posted: 16:10 - 26 Feb 2014 Post subject: |
 |
|
I'm just crying at the price of parts Think Fizzer rebuilt that R1 engine for ~£800. I would cry if my engine was wanged and required £400 to repair  |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| _Iain_ |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 _Iain_ Banned

Joined: 01 Feb 2012 Karma :     
|
 Posted: 17:08 - 26 Feb 2014 Post subject: |
 |
|
I just always looked at it like this;
Crying and worrying about something that's already happened that cannot be changed isn't going to benifit me, or anyone else. Better to focus my attention and energy on doing something constructive about it. ____________________ Please be aware that the above post may be full of complete nonsense.
Riding: '07 KTM Duke II, Baotian BT49QT-20 Driving: '88 Volvo 340 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Pete. |
This post is not being displayed .
|
 Pete. Super Spammer

Joined: 22 Aug 2006 Karma :     
|
 Posted: 18:16 - 26 Feb 2014 Post subject: |
 |
|
Your 'contaminated' bearings can be flushed out. I recovered the bearings from my 1952 milling machine spindle and my tool 7 cutter grinder both were notchy with bits of hardened grease. They might be a wee bit loose afterwards but probably no worse then most bike gearbox bearings. ____________________ a.k.a 'Geri'
132.9mph off and walked away. Gear is good, gear is good, gear is very very good  |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Vincent |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 Vincent Banned

Joined: 16 Oct 2006 Karma :    
|
 Posted: 21:14 - 26 Feb 2014 Post subject: |
 |
|
Do "we" know what the bike is?  ____________________ Space Is Deep |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Vincent |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 Vincent Banned

Joined: 16 Oct 2006 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Shaft |
This post is not being displayed .
|
 Shaft World Chat Champion

Joined: 27 Dec 2010 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| _Iain_ |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 _Iain_ Banned

Joined: 01 Feb 2012 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Shaft |
This post is not being displayed .
|
 Shaft World Chat Champion

Joined: 27 Dec 2010 Karma :    
|
 Posted: 23:32 - 26 Feb 2014 Post subject: |
 |
|
You said a head is £150 and if it's as rare as you say, don't keep an eye on it, hit the fucking BIN button, before somebody else does.
Worst way, you get a part you dont use and can easily get your money back on.
As for this other engine, over 400 quid is a helluva punt; you've just saved £110 on the head and who knows what on the bearings, that just leaves the gearbox bits, which I'm sure could be picked up somewhere.
If it's a well used engine in karting, search the karting forums. ____________________ Things get better with age; I'm close to being magnificent........
20 RE Interceptor, 83 Z1100A3, 83 GS650 Katana
WooHoo, I'm a Man Point Millionaire! https://www.bikechatforums.com/viewtopic.php?t=234035 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| _Iain_ |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 _Iain_ Banned

Joined: 01 Feb 2012 Karma :     
|
 Posted: 00:04 - 27 Feb 2014 Post subject: |
 |
|
Unfortunately I'm skint at the moment - bills do need to come before bike. Assuming its still here friday I'll grab it.
Engine is used in karting, in the USA. Back in the day the six speed boxes were all snapped up and fitted to later five speed models as an upgrade, the ones that were left all went n kart engines, so the chances of finding a good used six speed at a reasonable price are very low. ____________________ Please be aware that the above post may be full of complete nonsense.
Riding: '07 KTM Duke II, Baotian BT49QT-20 Driving: '88 Volvo 340 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Shaft |
This post is not being displayed .
|
 Shaft World Chat Champion

Joined: 27 Dec 2010 Karma :    
|
 Posted: 00:34 - 27 Feb 2014 Post subject: |
 |
|
Hit the BIN button in the morning, then stall him til Friday, that's a good head and you know it's for nothing.
Then forget this other engine nonsense; if things are that tight, you need to get creative and rebuild your existing unit.
You're thinking of paying a fair bit of wedge for a motor that's being described as all good, so that means you're paying a premium; what you actually want is an engine that's fubar, with a good gearbox, which will be a lot cheaper. ____________________ Things get better with age; I'm close to being magnificent........
20 RE Interceptor, 83 Z1100A3, 83 GS650 Katana
WooHoo, I'm a Man Point Millionaire! https://www.bikechatforums.com/viewtopic.php?t=234035 |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Quornholio |
This post is not being displayed because the poster has bad karma. Unhide this post / all posts.
|
 Quornholio World Chat Champion
Joined: 11 Jun 2011 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| 331X2 |
This post is not being displayed .
|
 331X2 Crazy Courier
Joined: 10 Jul 2013 Karma :  
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| _Iain_ |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 _Iain_ Banned

Joined: 01 Feb 2012 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
Old Thread Alert!
The last post was made 12 years, 266 days ago. Instead of replying here, would creating a new thread be more useful? |
 |
|
|