Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


briggs and stratton engines

Reply to topic
Bike Chat Forums Index -> Dear Auntie BCF...
View previous topic : View next topic  
Author Message

mic
Brolly Dolly



Joined: 09 Sep 2010
Karma :

PostPosted: 20:14 - 03 Apr 2014    Post subject: briggs and stratton engines Reply with quote

ok probably basic 101 engine stuff here but ill ask anyway!
i got an old 3hp rotavator. the guy who sold me it showed it working. i took it away, the next day eventually got it started then it died after about a minute. its got fresh petrol and the last owner claimes to have replaced the points etc recently.

the spark plug looks old. ive taken it out and cleaned it up. if you pull the starter rope, petrol goes thru ok so its not blocked. ive cleaned the spark plug up but still no joy. is it really as simple as a new spark plug to make it work? how would that explain it stop working all of a sudden?

cheers
____________________
zzr600
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

gdj444
Borekit Bruiser



Joined: 14 May 2012
Karma :

PostPosted: 20:21 - 03 Apr 2014    Post subject: Reply with quote

Could be carb diaphragms, common problem with these engines. From memory there are two (?) a small side one part number 270026, and a bigger one with a spring which I think was part number 391681.

Worked in a lawn mower parts dept for 10 years and obviously still have some memory filled up with what is now useless information Very Happy

May be completely wrong though, am sure a mechanic will be along shortly to prove the ex parts monkey an idiot Cool

Jonesy
 Back to top
View user's profile Send private message You must be logged in to rate posts

smegballs
World Chat Champion



Joined: 28 Oct 2007
Karma :

PostPosted: 20:22 - 03 Apr 2014    Post subject: Reply with quote

Good chance it is the fuel pump diaphragm in the carb. The rubber goes floppy with age and hence doesn't do much pumping.

Good news is that they cost less than a fiver delivered from ebay! Thumbs Up

I replaced one on a rotavator last summer, bloody thing would very occasionally fire for a few seconds but that was it. New diaphragm and it fire up and ran lovely.

If this engine is old enough to have points, I'd strongly recommend replacing the diaphragm as a matter of course, they are dirt cheap, and it is something quick and simple to rule out when trying to diagnose intermittent problems.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 20:37 - 03 Apr 2014    Post subject: Reply with quote

I don't know about the horizontal shaft engines but every vertical shaft non-starter I ever had was tight valve clearances. Fixed in a few minutes by filing the pushrods down a bit.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Snodvan
Spanner Monkey



Joined: 22 Jul 2010
Karma :

PostPosted: 20:42 - 03 Apr 2014    Post subject: Reply with quote

Carb diaphragm I bet. Went on my rotovator. Bugger to get at but cheap to replace.

I did also have the magneto fail (the machine is near 40 years old) and that costs a lot more.
____________________
04 (UK Reg) BMW F650cs, but really 02 first Reg in Holland
 Back to top
View user's profile Send private message You must be logged in to rate posts

doggone
World Chat Champion



Joined: 20 May 2004
Karma :

PostPosted: 20:50 - 03 Apr 2014    Post subject: Reply with quote

https://www.bikechatforums.com/viewtopic.php?p=3852866
 Back to top
View user's profile Send private message You must be logged in to rate posts

mic
Brolly Dolly



Joined: 09 Sep 2010
Karma :

PostPosted: 21:23 - 03 Apr 2014    Post subject: Reply with quote

doggone wrote:
https://www.bikechatforums.com/viewtopic.php?p=3852866


Could've updated a previous thread i suppose.

Still stands it doesn't work and I've thought about it more since then.
____________________
zzr600
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Raffles
World Chat Champion



Joined: 14 Apr 2009
Karma :

PostPosted: 21:24 - 03 Apr 2014    Post subject: Reply with quote

The B&S engine on my lawnmower can be a right bugger to start. I reckon that it's probably just the carb that needs overhauling but I'm too lazy to do it so I just whip the plug out, squirt Easy Start down the plug hole and it's away.
____________________
A good loser will always be a loser.
 Back to top
View user's profile Send private message You must be logged in to rate posts

mic
Brolly Dolly



Joined: 09 Sep 2010
Karma :

PostPosted: 14:32 - 05 Apr 2014    Post subject: Reply with quote

New spark plug £2.99 and it starts first time and does a great job Very Happy thanks for the advice and whatnot
____________________
zzr600
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stevo as b4
World Chat Champion



Joined: 17 Jul 2003
Karma :

PostPosted: 14:38 - 05 Apr 2014    Post subject: Reply with quote

Glad you got it going again!

I like olds Briggs motors, simple and crudely appealing too! I'd rather surround myself with B&S motors than mess with another Flymo 2stroke with the Tecumseh motor, they are all hateful buggers and I've never yet seen one that doesn't take lots of stripping down messing around and swearing like a trooper to start.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

mic
Brolly Dolly



Joined: 09 Sep 2010
Karma :

PostPosted: 14:54 - 05 Apr 2014    Post subject: Reply with quote

Turned over the bit between the black matting and rotavator with a fork the other day and it's take about 30 mins to cut it all down to normalish soil. Will start to pull weeds etc out when I've done more.

https://i547.photobucket.com/albums/hh470/mic8310/2F944544-680A-4CAE-8799-39824ED6C942_zpszesynrpv.jpg
____________________
zzr600
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Snodvan
Spanner Monkey



Joined: 22 Jul 2010
Karma :

PostPosted: 17:00 - 05 Apr 2014    Post subject: Reply with quote

mic wrote:
Turned over the bit between the black matting and rotavator with a fork the other day and it's take about 30 mins to cut it all down to normalish soil. Will start to pull weeds etc out when I've done more.

https://i547.photobucket.com/albums/hh470/mic8310/2F944544-680A-4CAE-8799-39824ED6C942_zpszesynrpv.jpg


Ah, same machine as I have. I have not used it for a few years but it is stored in a nice dry garage and I am sure would be ok if I needed it.

When I bought it I also bought the wheelbarrow kit ie Take off the digging tines and replace them with a pair of big tread wheels. A wheelbarrow scoop then fits on top of the platform and - behold, a powered wheelbarrow. I shifted a lot of stuff in mine over the years. I still have the wheels and barrow scoop but have not used it for ages. Some of the "bits" that attach the scoop to the machine are missing - but given a need I could improvise. However, much of the need has gone as I gave up my allotment around 2004.

Snod
____________________
04 (UK Reg) BMW F650cs, but really 02 first Reg in Holland
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 229 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Dear Auntie BCF... All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.05 Sec - Server Load: 0.69 - MySQL Queries: 14 - Page Size: 72.62 Kb