|
|
| Author |
Message |
| graysam1 |
This post is not being displayed .
|
 graysam1 L Plate Warrior
Joined: 19 Apr 2014 Karma :   
|
 Posted: 11:47 - 19 Apr 2014 Post subject: mechanical advice |
 |
|
Hi, I have a yamaha aerox yq100 100cc, it ran like a dream until someone tried to steal it and jabbed a screwdriver in the ignition.
I replaced the ignition and couldnt get it to start, took it to a mechanic who said it was the CDI unit, had new one fitted and still couldnt get it to start, he said it was the variator, new one fitted and still wouldnt start.
Took it to 2nd mechanic who said it was the generator stater plate, new one fitted and still wouldnt start, said it was the starter relay, new one fitted and it still wouldnt start.
Its had new rectifier & regulator, resistor, leads, spark plug, clutch, flasher relay, lever and switches - all genuine yamaha new parts. the mechanic said its sparking but not holding it.
Its my pride and joy, I am now depressed, angry and broke
Any suggestions on what it could be will be appreciated ____________________ sj etheridge |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| berzerker |
This post is not being displayed .
|
 berzerker Renault 5 Driver
Joined: 27 Sep 2013 Karma :    
|
 Posted: 13:51 - 19 Apr 2014 Post subject: |
 |
|
Does it have an immobiliser?
Has the wiring been damaged when the ignition was messed with?
Why on earth did your mechanic change the variator?  |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Vincent |
This post is not being displayed because the poster is banned. Unhide this post / all posts.
|
 Vincent Banned

Joined: 16 Oct 2006 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| DrSnoosnoo |
This post is not being displayed .
|
 DrSnoosnoo World Chat Champion

Joined: 28 Mar 2012 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| c_dug |
This post is not being displayed .
|
 c_dug Super Spammer

Joined: 04 Sep 2007 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| c_dug |
This post is not being displayed .
|
 c_dug Super Spammer

Joined: 04 Sep 2007 Karma :    
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| WD Forte |
This post is not being displayed .
|
 WD Forte World Chat Champion

Joined: 17 Jun 2010 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| graysam1 |
This post is not being displayed .
|
 graysam1 L Plate Warrior
Joined: 19 Apr 2014 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| WD Forte |
This post is not being displayed .
|
 WD Forte World Chat Champion

Joined: 17 Jun 2010 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| graysam1 |
This post is not being displayed .
|
 graysam1 L Plate Warrior
Joined: 19 Apr 2014 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Bunny Lingus |
This post is not being displayed .
|
 Bunny Lingus Traffic Copper

Joined: 20 Apr 2014 Karma :  
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| graysam1 |
This post is not being displayed .
|
 graysam1 L Plate Warrior
Joined: 19 Apr 2014 Karma :   
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| smegballs |
This post is not being displayed .
|
 smegballs World Chat Champion
Joined: 28 Oct 2007 Karma :  
|
 Posted: 14:33 - 21 Apr 2014 Post subject: |
 |
|
Okay first off.
Here's the service manual for your bike.
https://zsebog.com/wp-content/uploads/yamaha-yq100-2000-en.pdf
So now you have access to the wiring diagrams at least. I'll take a quick look and see what kind of ignition system you have.
Ignition wiring diagram is on page 194. From the looks of things, its a self-generating cdi system, as I'd expect on small bikes like this. Just follow the diagnosis chart that is after the ignition wiring diagram. Get yourself a multimeter too. You can get one for a tenner or so, which will do all the auto-electrical jobs. Continuity buzzer is very useful, so I recommend making sure it has that feature.
https://www.rapidonline.com/Test-Measurement/Rapid-318A-Digital-Multimeter-519309
This is my one, I'm well pleased with it. Does all my auto-electrics as well as my electronics hobby projects.
Last edited by smegballs on 14:40 - 21 Apr 2014; edited 1 time in total |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| evoboy |
This post is not being displayed .
|
 evoboy World Chat Champion

Joined: 20 Aug 2009 Karma :    
|
 Posted: 14:38 - 21 Apr 2014 Post subject: |
 |
|
If its got spark then it should start.
Is it getting fuel?
If you buy bits from a Yamaha dealer then no wonder your skint. ____________________ Suzuki GT250 x7------- Fazer 600------CB250RS------Aprilia Rally 70----- Bandit 600
APT Motorcycles |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| Pete. |
This post is not being displayed .
|
 Pete. Super Spammer

Joined: 22 Aug 2006 Karma :     
|
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
| smegballs |
This post is not being displayed .
|
 smegballs World Chat Champion
Joined: 28 Oct 2007 Karma :  
|
 Posted: 16:01 - 21 Apr 2014 Post subject: |
 |
|
https://i.imgur.com/Zv1ULJr.png
Okay OP, I've highlighted the ignition system in red.
If it ran fine until someone tried to do the ignition barrel, my guess is that that BW wire isn't being grounded properly/intermittently connection.
As you can see its a very simple system with not a lot of connections. The key just earth a cdi wire to start/stop the sparks.
It's a shame you have bought loads of parts that are totally unneeded for the ignition system like R/R, flasher relay etc.
This is what I would do if I was working on it.
1. Get a length of wire and make a direct ground for the BW wire on the cdi, to rule out a dodgy ignition barrel. If everything was a go
2. Check resistances of HT coil, as per manual I linked.
3. Check CDI source coil. One of these will the (BR) Black and Red wire going into the CDI. I don't know model specific whether it is referenced to ground or not, so I'd first check between ground and BR: you should see about 200-300V AC with the engine spinning over. You may have to test between BR and GW (green and white) though, should see the same voltage. Test against BR and ground first though.
That should give you a good indication of what is going on.
WR and WL will be the cdi pick-up coil wires, testing between these and spinning the engine will give a low pulse of AC. This is a pulse and not a constant generator (like the cdi source coil) though so you probably won't pick it up on a multimeter, you'd see it on an oscilloscope though. |
|
| Back to top |
|
You must be logged in to rate posts |
|
 |
Old Thread Alert!
The last post was made 12 years, 213 days ago. Instead of replying here, would creating a new thread be more useful? |
 |
|
|