Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Bandit missing on 2 cylinders

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

bandit600
Derestricted Danger



Joined: 19 Aug 2010
Karma :

PostPosted: 14:00 - 19 Aug 2010    Post subject: Bandit missing on 2 cylinders Reply with quote

I have recently purchased a R Reg Bandit 600 which has been stood for around 2 years in someones garage.
After a new battery, plugs and oil filter it fires up fine, but it is missing on 2 cylinders. It's fine with the choke on but once switched off it runs like a dog and cuts out, and will not idle for long.
I have heard about fuel going off, so i have put some new fuel in but seems to be still doing the same, although it is mixed with the old, which probably was'nt a good idea.
I am hopefully going to clean the carbs out this weekend, and wondered if anyone has any advice on this, as it will be a first for me. What is the best carb cleaner to use and best way to do it. I don;t really want to remove the carbs if i can help it, but would this be the only way to do it.
Thanks in advance.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Barry_M2
World Chat Champion



Joined: 09 Sep 2004
Karma :

PostPosted: 14:08 - 19 Aug 2010    Post subject: Reply with quote

If it fires ok with the choke on I'd suspect one of the following.

Air leak on the inlet somewhere, or blocked pilot jets. You will need to take the carbs off.

Personally, I'd go with blocked pilot jets.

Thumbs Up
____________________
ZXR750R (M2) - For the road.
CBR1000 RR4 - For the track.
https://www.bikechatforums.com/profile.php?mode=viewprofile&u=4332
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bandit600
Derestricted Danger



Joined: 19 Aug 2010
Karma :

PostPosted: 17:55 - 19 Aug 2010    Post subject: Reply with quote

Thanks for the advice Barry.
 Back to top
View user's profile Send private message You must be logged in to rate posts

chillyman0
Nearly there...



Joined: 11 Sep 2008
Karma :

PostPosted: 18:39 - 19 Aug 2010    Post subject: Reply with quote

Could be that the float needles are sticking, try cleaning the ends of them with some emery cloth when you get the carbs apart.
____________________
preivious : 2007 Skyjet 125 (died), 1991 gsf400 (problems, rotting in garden)
1996 gsf600n (sold)
current : 1996 VFR750 for sale, PM for info! 2000 E1 ZX-9r
 Back to top
View user's profile Send private message You must be logged in to rate posts

bandit600
Derestricted Danger



Joined: 19 Aug 2010
Karma :

PostPosted: 13:28 - 23 Aug 2010    Post subject: Reply with quote

Thanks for the tips guys.
I pulled the carbs off on Saturday and found the main jet on number 1 was completley blocked, the other 3 about 70% blocked, and 1 pilot jet blocked, i am amazed i even got the thing started before.
Cleaned them all up, and gave it some fresh fuel with redex and it fires first time and runs great, although i think the carbs need balancing now, so a trip to the garage as i have no gauges.

Cheers
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ditto
Nearly there...



Joined: 26 Sep 2009
Karma :

PostPosted: 14:12 - 23 Aug 2010    Post subject: Reply with quote

Yup, when a bikes been stood a while, any running problems are almost certainly carbs. Sometimes coils but usually carbs.

Don't get them balanced until you've done a full service, oil, plugs, valve clearances etc. Balancing should be the last step.
____________________
CG 125 > Bandit 600 > CBR 600 FY > Street Triple R
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bandit600
Derestricted Danger



Joined: 19 Aug 2010
Karma :

PostPosted: 14:17 - 23 Aug 2010    Post subject: Reply with quote

Thanks Ditto
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 16 years, 10 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.36 - MySQL Queries: 13 - Page Size: 50.37 Kb