Custom washers

[Ichy]

I'm after a couple of 25.4mm id x 32mm od x 0.5mm washers preferably in aluminium, brass or copper. I've searched the 'net and ebay and cannot find anything near. Is anyone aware of where I might get a couple made? Sizes are not precise and can be a bit bigger.
____________________
https://www.metacafe.com/watch/1972097/how_to_behave_on_a_forum/

[stu_m]

30x25? https://www.ebay.co.uk/itm/SAW-BLADE-BUSHING-WASHERS-REDUCING-RINGS-SPACER-BUSHES-/360772453458?pt=UK_Home_Garden_PowerTools_SM&var=&hash=item53ffb6c452

[Ichy]

Cheers but they are going to be way to thick.
____________________
https://www.metacafe.com/watch/1972097/how_to_behave_on_a_forum/

[stu_m]

I think your going to really struggle

these any good?

https://www.ebay.co.uk/itm/5-X-24MM-COPPER-SEALING-WASHER-WASHERS-O-D-32mm-KW164-/270974594222?pt=UK_DIY_Material_Nails_Fixing_MJ&hash=item3f17582cae

[Pete.]

[Ichy]

[Pete.]

No worries I'll knock them up tomorrow night.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good

[Ichy]

That's really good of you. Thanks.
____________________
https://www.metacafe.com/watch/1972097/how_to_behave_on_a_forum/

[Walloper]

[Kickstart]

Hi

Is other than the thickness these seem to match:-

https://www.amazon.co.uk/Copper-Washer-Sealing-Washers-25-4mm/dp/B00AJ6EOKM/ref=sr_1_13?s=automotive&ie=UTF8&qid=1388962631&sr=1-13&keywords=26Mm+Copper+Sealing+Washer

Grind them down to 0.5mm?

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[Pete.]

Set of phosphor bronze shims ID 25.4mm OD 31.75mm thickness 0.3mm to 1.1mm in 0.1mm increments tolerance 0.03mm plus a couple intermediates.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good

[Pete.]

Generic lathe-whoring pic 'just because'

Glad for the reason to use it TBH, don't get much opportunity what with work and stuff.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good

[Chalky.]

Nice one Pete.

[Walloper]

[Pete.]

[Walloper]

[WD Forte]

lathe whoring!
https://l-userpic.livejournal.com/43353041/2497543

Is that a Monarch 10?

Old, circa 1940's but built to very high standard they were
____________________
bikers smell of wee

[P.]

[Pete.]

[Ichy]

Thanks for the help Pete. Absolutely perfect and saved about 20 hours of rework.
____________________
https://www.metacafe.com/watch/1972097/how_to_behave_on_a_forum/