Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Cagiva mito 125 starts then revs high and won't drop

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

merky69
Borekit Bruiser



Joined: 02 May 2013
Karma :

PostPosted: 22:56 - 04 Mar 2014    Post subject: Cagiva mito 125 starts then revs high and won't drop Reply with quote

Just recently bought a cagiva mito 125 7 speed on a 2000 plate , bike was bought not running but I took the barrel off and luckily enough it was just rings stuck in there seats so fitted a be piston.

I came to fire the bike up and it started without effort, but it was revving really high like 6 - 7 k without touching the throttle , if I did touch the throttle it would raise easily but then would drop back down to about 6k again but very slowly . I have took the carb off and cleaned all jet passages and tightened all jubilee clips from air box to reeds .
I did notice carb was leaking a tiny bit even after I cleaned it .
Any help or advice would be greatly appreciated

Thanks for reading my post
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 00:05 - 05 Mar 2014    Post subject: Reply with quote

Hi

Is the carb rubber mounting (between the carb and the reed valves) cracked? If these crack there is an air leak after the carb and you land up with a load of extra air getting in raising the idle speed. Also possible that the main bearing seals are worn which gives a similar problem.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

MattWadz
Trackday Trickster



Joined: 08 Apr 2011
Karma :

PostPosted: 07:58 - 05 Mar 2014    Post subject: Reply with quote

air leak or youve put the throttle slide in the wrong way maybe?
____________________
Pitbike x2, Mini Moto x4, China Quad, 02' Suzuki AP50 > 03' MBK Nitro > 86' Suzuki GP100 > 02' Yamaha Jog R > 57' Honda Lead 100 > 95' Piaggio ZIP Rst 50 > 51' Suzuki TS50x > 83' Honda CB125TDE Twin > 51' Yamaha Aerox > 98' Kawasaki KX60 > 89' Yamaha DT50MX > 80's Honda QR50 > 05' CG clone > 125cc China Pitbike > 91' Honda MTX125 RW-L > 09' Peugeot Speedfight 2 LC LR > Lucky MX 140cc > Apache Tomahawk 50 Quad (current = 2010 Yamaha WR125R
 Back to top
View user's profile Send private message You must be logged in to rate posts
- This post is not being displayed because the poster has bad karma. Unhide this post / all posts.

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 13:58 - 05 Mar 2014    Post subject: Reply with quote

Bad routing of cable.

Idle screw adjust badly, so far in as PO sold as non running, god knows what he might have done.

Crack in inlet.

Stuck choke.

I'd check those first.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 260 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.05 Sec - Server Load: 0.32 - MySQL Queries: 13 - Page Size: 44.78 Kb