Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Oil change.. how much!? Also mechanic query, abs brake pads?

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

bikertomm
World Chat Champion



Joined: 03 Jul 2010
Karma :

PostPosted: 22:27 - 04 Mar 2014    Post subject: Oil change.. how much!? Also mechanic query, abs brake pads? Reply with quote

Looking at doing my first oil change on a bike (my hornet) soon.

Have just bought an oil filter and crush ring for the sump, £15.

4 Litres of castrol's finest is coming in at £40, found it for £30 online.

So near enough 50 spunking pound!

Still, looking forward to doing it, only worry is the oil filter is going to be a bitch to get off- but hopefully not. Any tips?

Also, on another note:

Is it generally acceptable to say buy my own brake pads and ring up and ask mechanics if they would be interested in fitting them?

Or will I be laughed at down the phone? I'm guessing they make a certain profit through parts?

It's looking like I can get brake pads for front and rear for £40 (Goldfren?)

I don't just want any old shitty pads put in - any advice on this?

This means I can do my own oil change and have new pads for under £100. Then say labour of £60+ I think I'll be happy with.. I don't know how to do my own brake pads and there's abs on the bike which I've heard can make it harder.

Cheers! Thumbs Up
____________________
07' Honda Hornet now full powaah! My guide on performing an oil change!


Last edited by bikertomm on 12:12 - 06 Mar 2014; edited 1 time in total
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Doovy
World Chat Champion



Joined: 21 Jul 2008
Karma :

PostPosted: 22:31 - 04 Mar 2014    Post subject: Reply with quote

Servicing a Hornet is piss easy. Do the brakes yourself.

Some mechanics say they won't fit externally supplied parts as if its the wrong fitment, they usually discover this when the bike is up on the ramp and it means wasted time.

To get the filter off easily, drain all the oil out the sump, then hammer a screwdriver in through the filter. Use that as a turning handle, it will come off easily. Just make sure you drain it all first!!

I used some ebay bought brake pads on my Hornet, I think EBC they were.

I'm in North East London, you like look you're on the west of the M25.. if you ever needed a hand I'm sometimes about here. Not had experience with the ABS brakes though.
____________________
Yamaha RXS 100 > Honda CD 250 > Honda Hornet 600 > Honda CBR 600RR > Yamaha RXS 100 > Kawasaki ZX6R J2 > Yamaha FZ1
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

bikertomm
World Chat Champion



Joined: 03 Jul 2010
Karma :

PostPosted: 22:37 - 04 Mar 2014    Post subject: Reply with quote

Sweet, thanks for that.

I've heard of that screwdriver method!

I've got a paddock stand too (for the rear) so yeah oil change should be easy, wonder what I can get to go wrong.. Laughing

Cheers for the offer, I'm near High Wycombe.

Hopefully someone may be able to shed some light on the abs issue!

Thumbs Up Karma
____________________
07' Honda Hornet now full powaah! My guide on performing an oil change!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 22:37 - 04 Mar 2014    Post subject: Reply with quote

The hardest part of servicing a Hornet is changing the plugs. Seriously. Laughing

It took me as long to change the plugs as it did to change the oil and filter last service. Fiddly buggers. Brakes are a doddle, filter - remove as above or buy a strap wrench. Don't overtighten the new one - screw it in with your fingertips then nip it up with a full hand grip.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Clutchy
World Chat Champion



Joined: 08 Nov 2011
Karma :

PostPosted: 22:52 - 04 Mar 2014    Post subject: Reply with quote

Make sure you turn the sump bolt the correct way, working on bikes upside down means you can forget sometimes lol
____________________
Malaguti F12 Phantom-Dead, Suzuki AY50- Dead, NRG power DD LQ, CBR125.
*33 BHP restriction up on 10/12/14* Current bikes/car: SV 650 S/ MKIV GOLF
Guide to pass your test with no lessons!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 22:55 - 04 Mar 2014    Post subject: Reply with quote

Clutchy wrote:
Make sure you turn the sump bolt the correct way, working on bikes upside down means you can forget sometimes lol


Voice of experience? Laughing
 Back to top
View user's profile Send private message You must be logged in to rate posts

Clutchy
World Chat Champion



Joined: 08 Nov 2011
Karma :

PostPosted: 22:59 - 04 Mar 2014    Post subject: Reply with quote

Shhh!



Rounded it off, glad I didn't crack the sump, however it did mean I had the pleasure of extending my list of tools and buying a larger version of this:


https://s7g3.scene7.com/is/image/ae235?$p$&layer=0&size=281,281&layer=1&size=281,281&src=ae235/96028_P
____________________
Malaguti F12 Phantom-Dead, Suzuki AY50- Dead, NRG power DD LQ, CBR125.
*33 BHP restriction up on 10/12/14* Current bikes/car: SV 650 S/ MKIV GOLF
Guide to pass your test with no lessons!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

-Matt-
World Chat Champion



Joined: 28 Apr 2013
Karma :

PostPosted: 01:39 - 05 Mar 2014    Post subject: Reply with quote

I've taken plenty of my own supplied parts for fitment at various garages in the past, never had any comments or problems. That being said definately do it all yourself - oil and pads are dead easy - were the first couple of things i did when i started doing my own work on the bike a year or two back.

Few youtube videos and you'll know exactly what you're doing Thumbs Up

I've used this for years without problems. [email protected] (can get cheaper on offer sometimes)
 Back to top
View user's profile Send private message You must be logged in to rate posts

janner_10
World Chat Champion



Joined: 26 Sep 2011
Karma :

PostPosted: 05:38 - 05 Mar 2014    Post subject: Reply with quote

As all asaid - do it yourself. definitely 2 of the more easier jobs to do, get in the habit of doing the oil regularly - I do mine every 2k miles and the filter every other change.

You tube is your friend and get a tube of copper grease for the back of the pads.
____________________
Yamaha FZS600 (Now gone to heaven) > CBR600F4i (SOLD) > '99 YZF-R1
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bikertomm
World Chat Champion



Joined: 03 Jul 2010
Karma :

PostPosted: 12:45 - 05 Mar 2014    Post subject: Reply with quote

Sweet, cheers for the tips boys. Most parts on order so this weekend will hopefully get something done Very Happy
____________________
07' Honda Hornet now full powaah! My guide on performing an oil change!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Doovy
World Chat Champion



Joined: 21 Jul 2008
Karma :

PostPosted: 13:50 - 05 Mar 2014    Post subject: Reply with quote

janner_10 wrote:
get a tube of copper grease for the back of the pads.


That's a point. A bit of copper grease on the back of the pads stops it binding to the disc Thumbs Up

IIRC the inner two plugs were blocked by the frame, it took a fair bit of maneuvering the plug tool to get them out!
____________________
Yamaha RXS 100 > Honda CD 250 > Honda Hornet 600 > Honda CBR 600RR > Yamaha RXS 100 > Kawasaki ZX6R J2 > Yamaha FZ1
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

Minty
World Chat Champion



Joined: 23 Dec 2005
Karma :

PostPosted: 14:11 - 05 Mar 2014    Post subject: Reply with quote

Doovy wrote:
That's a point. A bit of copper grease on the back of the pads stops it binding to the disc


lolwut?

How does grease to the back stop the front sticking to a disc?

It helps stop brake squeel. Saying that, I've never used it and yet to have any brakes get noisy.
____________________
My fingers smell of your mum.
 Back to top
View user's profile Send private message You must be logged in to rate posts

ficedula
Scooby Slapper



Joined: 10 Aug 2011
Karma :

PostPosted: 14:43 - 05 Mar 2014    Post subject: Reply with quote

bikertomm wrote:
Sweet, thanks for that.

I've heard of that screwdriver method!

I've got a paddock stand too (for the rear) so yeah oil change should be easy, wonder what I can get to go wrong.. Laughing


Having just failed to change my oil ("that'll not take long, I''ll do it at lunchtime!") then if you've got a non-standard set of exhaust downpipes on, double check if the sockets/extensions/whatever-you're-using to get the sump bolt out will actually get to it around the pipes.

Felt like a right muppet when I realised the new exhaust I fitted last month blocks access to the sump bolt Doh!

Probably not going to be an issue, but if you really are wondering what could go wrong... Wink
____________________
Bike history: YBR125 -> XJ600
 Back to top
View user's profile Send private message You must be logged in to rate posts

-Matt-
World Chat Champion



Joined: 28 Apr 2013
Karma :

PostPosted: 14:46 - 05 Mar 2014    Post subject: Reply with quote

Minty wrote:
It helps stop brake squeel. Saying that, I've never used it and yet to have any brakes get noisy.
I have used it and have had the brakes continue squeeling like a pig Laughing seems a bit hit n' miss
 Back to top
View user's profile Send private message You must be logged in to rate posts

Minty
World Chat Champion



Joined: 23 Dec 2005
Karma :

PostPosted: 14:51 - 05 Mar 2014    Post subject: Reply with quote

-Matt- wrote:
Minty wrote:
It helps stop brake squeel. Saying that, I've never used it and yet to have any brakes get noisy.
I have used it and have had the brakes continue squeeling like a pig Laughing seems a bit hit n' miss


Put some on the front of the pads. That'll stop it. Wink
____________________
My fingers smell of your mum.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Doovy
World Chat Champion



Joined: 21 Jul 2008
Karma :

PostPosted: 15:33 - 05 Mar 2014    Post subject: Reply with quote

Minty wrote:
Doovy wrote:
That's a point. A bit of copper grease on the back of the pads stops it binding to the disc


lolwut?

How does grease to the back stop the front sticking to a disc?


Well I've never had a pad bind to the disc so far Laughing
____________________
Yamaha RXS 100 > Honda CD 250 > Honda Hornet 600 > Honda CBR 600RR > Yamaha RXS 100 > Kawasaki ZX6R J2 > Yamaha FZ1
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

Minty
World Chat Champion



Joined: 23 Dec 2005
Karma :

PostPosted: 15:49 - 05 Mar 2014    Post subject: Reply with quote

Touché.
____________________
My fingers smell of your mum.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Clutchy
World Chat Champion



Joined: 08 Nov 2011
Karma :

PostPosted: 16:45 - 05 Mar 2014    Post subject: Reply with quote

ficedula wrote:


Having just failed to change my oil ("that'll not take long, I''ll do it at lunchtime!") then if you've got a non-standard set of exhaust downpipes on, double check if the sockets/extensions/whatever-you're-using to get the sump bolt out will actually get to it around the pipes.

Felt like a right muppet when I realised the new exhaust I fitted last month blocks access to the sump bolt Doh!

Probably not going to be an issue, but if you really are wondering what could go wrong... Wink



Can you not just get a spanner on it from one side rather than a socket???
____________________
Malaguti F12 Phantom-Dead, Suzuki AY50- Dead, NRG power DD LQ, CBR125.
*33 BHP restriction up on 10/12/14* Current bikes/car: SV 650 S/ MKIV GOLF
Guide to pass your test with no lessons!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 17:40 - 05 Mar 2014    Post subject: Reply with quote

ficedula wrote:


Having just failed to change my oil ("that'll not take long, I''ll do it at lunchtime!") then if you've got a non-standard set of exhaust downpipes on, double check if the sockets/extensions/whatever-you're-using to get the sump bolt out will actually get to it around the pipes.

Felt like a right muppet when I realised the new exhaust I fitted last month blocks access to the sump bolt Doh!

Probably not going to be an issue, but if you really are wondering what could go wrong... Wink


My OHs Zephyr has a 4 into 1 that routes the downpipes under the sump and across the filter cover. It's a drop the pipes job to change the oil. Upside is that the header studs will never seize through corrosion. Laughing
 Back to top
View user's profile Send private message You must be logged in to rate posts

ficedula
Scooby Slapper



Joined: 10 Aug 2011
Karma :

PostPosted: 18:09 - 05 Mar 2014    Post subject: Reply with quote

Clutchy wrote:

Can you not just get a spanner on it from one side rather than a socket???


Maaaaaybe, I did see if I could get a spanner on it, but the sump bolt has a kind of 'lip' around it that means while a socket goes on fine, getting a flat spanner on from the side isn't easy.

I have some spanners with an offset handle which would get around that problem, except the offset means the pipes stop you getting it on again! Wink

In fairness it might be doable with a spanner, just not in the time I had at lunch. Be a bit tedious, though, given the limited room.

Islander wrote:

My OHs Zephyr has a 4 into 1 that routes the downpipes under the sump and across the filter cover. It's a drop the pipes job to change the oil. Upside is that the header studs will never seize through corrosion.


Not entirely coincidentally, I went from the OEM 4-2 to a 3rd party 4 into 1 when I fitted the new exhaust last month... Wink
____________________
Bike history: YBR125 -> XJ600
 Back to top
View user's profile Send private message You must be logged in to rate posts

bikertomm
World Chat Champion



Joined: 03 Jul 2010
Karma :

PostPosted: 19:23 - 05 Mar 2014    Post subject: Reply with quote

I've just seen a cheeky tip: put a bit of tinfoil on the downpipes before you take the oil filter off to prevent most of it making a stinky mess when you start up the bike.. Thumbs Up
____________________
07' Honda Hornet now full powaah! My guide on performing an oil change!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bladerunner
World Chat Champion



Joined: 09 Sep 2006
Karma :

PostPosted: 00:43 - 06 Mar 2014    Post subject: Reply with quote

Another tip...wipe a bit of new oil on the filter O ring....stops it bunching up when fitting
____________________
Current bikes...cbr929, KDX200's, Rd125lc mk2, RGV250's
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

bikertomm
World Chat Champion



Joined: 03 Jul 2010
Karma :

PostPosted: 12:13 - 06 Mar 2014    Post subject: Reply with quote

Will do!

Does anyone know if abs will affect anything when putting in new brake pads?

It seems fairly simple to do after watching some videos and I am up for it, I just want to make sure that because I have abs it's no problem..

Cheers Thumbs Up
____________________
07' Honda Hornet now full powaah! My guide on performing an oil change!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Doovy
World Chat Champion



Joined: 21 Jul 2008
Karma :

PostPosted: 14:16 - 06 Mar 2014    Post subject: Reply with quote

I think because of the ABS it may be harder to push the pistons back into the caliper.. so you may need to release the bleed nipple for the pressure. You may also need to bleed the brakes if air gets into the system Idea
____________________
Yamaha RXS 100 > Honda CD 250 > Honda Hornet 600 > Honda CBR 600RR > Yamaha RXS 100 > Kawasaki ZX6R J2 > Yamaha FZ1
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

bikertomm
World Chat Champion



Joined: 03 Jul 2010
Karma :

PostPosted: 18:17 - 06 Mar 2014    Post subject: Reply with quote

After just having a look at my bike the brakes do seem a bit daunting Laughing

I've watched how-to videos and it looks so simple on a bike without abs, here's a picture of mine:

https://i1145.photobucket.com/albums/o520/bikerrtomm/20140306_1545999_zps794d9b3e.jpg

You can see 1&2 are the standard 12mm bolts, but then the abs system is all attached and ballsed up, it also links across to the other side.. I just don't know what I'll be doing..

Rear looks a tad confusing too:
https://i1145.photobucket.com/albums/o520/bikerrtomm/20140306_134320_zps995f7647.jpg


Oil filter:
https://i1145.photobucket.com/albums/o520/bikerrtomm/20140306_144605_zps641c6672.jpg


Aaaaand my oil window... with no oil in Shocked The bike was tilted on the stand, but still, will soon be sorting this.

https://i1145.photobucket.com/albums/o520/bikerrtomm/20140306_134022_zps5c3f0749.jpg

Is this the correct sump bolt? Again 12mm. I guess it is because there's fuck all else down there.. seems odd that it comes off horizontally though Laughing Hope it doesn't spray oil everywhere lol.

https://i1145.photobucket.com/albums/o520/bikerrtomm/20140306_134110_zpsa8cae80f.jpg


aaand my bent indicator.. I bought it like this, passed MOT like it as it's still fully functional, but I would like to bodge this at some point - any ideas?

https://i1145.photobucket.com/albums/o520/bikerrtomm/20140306_144544_zpsf93efcc3.jpg

Gave it a quick wash too!
https://i1145.photobucket.com/albums/o520/bikerrtomm/20140306_144601_zpsb20cec6e.jpg

Any tips appreciated.....

Cheers!! Thumbs Up
____________________
07' Honda Hornet now full powaah! My guide on performing an oil change!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 259 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.11 Sec - Server Load: 0.6 - MySQL Queries: 15 - Page Size: 140.41 Kb